Asus gt-be98 firmware downgrade

[supershaun]

Has anyone had any success with downgrading firmware on the Asus gt-be98. I am at my wits end. I installed the new firmware and MLO worked fairly okay but but now I’m getting 700-900 download - 1700 upload. I’m not sure what the new firmware has meant to of fixed but it’s just made it worse.

So has anyone been able to downgrade to previous firmware?

 

[madhatter01]

Yes its buggy, there BE98 non pro just got an upgrade. So we should be soon since they are the same, just different radios. Trust me, my brand new one I got as a replacement still does weird things.

ROG Rapture GT-BE98 | Gaming networking｜ROG - Republic of Gamers｜ROG Deutschland

Quad-Band WiFi 6E gaming router, new 320MHz bandwidth in 6GHz band, triple 10G ports, 2.5G WAN port, Extendable WiFi with AiMesh support, RangeBoost Plus, Triple-level game acceleration and free network security

rog.asus.com

 

[supershaun]

have you got pictures of what your MLO is setup like as not sure if mine is wrong?

 

[Mappi75]

Can't downgrade my GT-BE98 it always fails.. even with factory reset.

 

[supershaun]

Can't downgrade my GT-BE98 it always fails.. even with factory reset.

Yeah I have tried also. Wasn’t sure if anyone had any success

 

[Dragnet.nu]

Weird things happen with my BE88U node when the BE98 is running the new firmware:
BE96/98 updates

 

[supershaun]

Weird things happen with my BE88U node when the BE98 is running the new firmware:
BE96/98 updates

Yeah I still don’t think it should have been released as stable firmware.

 

[Dragnet.nu]

I have two issues with my BE98:
1) SSIDs show up in hex in the admin interface for my AXE1600 node and my BE88U node
2) 5 GHz is disabled in the BE88U node

Otherwise it is working fine, no speed issues at all.

The AXE1600 works fine but it recently got an update (Sept 27) to 3.0.0.4.388_24374. The BE88U is stuck on 3.0.0.6.102_33921 from back in May 19.
Two older AX-nodes works fine.


(The BE98 is running 3.0.0.6.102_36852.)

 

[RMerlin]

I don't know if that's the case here, but there's a good chance that Asus may have put a block in place to prevent downgrades of the GT-BE98/GT-BE98_PRO to below a minimum version due to the availability of idfferent hardware revision where downgrading a newer revision would brick your device.

 

[supershaun]

I don't know if that's the case here, but there's a good chance that Asus may have put a block in place to prevent downgrades of the GT-BE98/GT-BE98_PRO to below a minimum version due to the availability of idfferent hardware revision where downgrading a newer revision would brick your device.

Oh okay so basically we are all still stuck with a router that doesn’t function the way it’s meant to

 

[Kingp1n]

Has anyone had any success with downgrading firmware on the Asus gt-be98. I am at my wits end. I installed the new firmware and MLO worked fairly okay but but now I’m getting 700-900 download - 1700 upload. I’m not sure what the new firmware has meant to of fixed but it’s just made it worse.

So has anyone been able to downgrade to previous firmware?

It does state on their official page when upgrading to latest fw:

ASUS GT-BE98 Firmware version 3.0.0.6.102_36852
Version 3.0.0.6.102_36852

69.04 MB​

2024/10/04​

*Please be advised that due to an architecture upgrade in AiMesh, we highly discourage downgrading to earlier firmware versions as it may result in connectivity problems. If you experience any difficulties, we suggest resetting the AiMesh router to its default settings and re-establishing the mesh connection.

 

[RMerlin]

It does state on their official page when upgrading to latest fw:

The wireless settings storage will definitely not be compatible. Going back to any release older will at the very minimum require a complete factory default reset. Wireless parameters are no stored in the same nvram variables as before.

 

[Kingp1n]

The wireless settings storage will definitely not be compatible. Going back to any release older will at the very minimum require a complete factory default reset. Wireless parameters are no stored in the same nvram variables as before.

This is really good info. I appreciate that!

 

[Dragnet.nu]

New FW available for the BE88U - 3.0.0.6.102_33928.

 

[Dragnet.nu]

New FW available for the BE88U - 3.0.0.6.102_33928.

Still no 5 GHz for my BE88U AImesh node (that the last upgrade to my BE98 broke).

 

[Dragnet.nu]

Could it be that the new FW for BE98, in effect, breaks 5 GHz on WiFi7 nodes in the AiMesh? All my other nodes runs fine on 5 GHz but they are all WiFi6 or WiFi6E.