L&LD
Part of the Furniture
After the Chinese New Year.
2 days! Yay!
After the Chinese New Year.
2 days! Yay!
.It falls between January 21 and February 20
AFAIK, CNY celebrations last about a whole week.
When some new Asus fw releases should we make a factory reset Merlin or not necessary ?
Thanks
When some new Asus fw releases should we make a factory reset Merlin or not necessary ?
Thanks
Asus will mention in the changelog whenever a factory default reset is required.
Thanks Merlin
Just another question to not open another thread for a simple thing
Is there any way to disable DNS relay at asus console? I mean, instead to show 192.168.x.x as DNS in the devices show the real DNS like 8.8.8.8...... ?
Thanks
You can configure what DNS to send to clients on the DHCP page, however you can only provide one DNS server.
Using the router as the DNS is the desired setup, as it will also ensure that devices are able to resolve other device names on your LAN.
Thanks
just one more question
I have an Astro A50 headset, it uses 5.8 Ghz band, when i`m using the wifi at the devices and making a speed test for example the Astro sound start to lag a lot, when the test finishes the headset comes to normal
is this related to the headset software, router firmware or there is nothing we can do?
Thanks again Merlin
I had the same issue. The A50 is tied to a certain channel that interferes with your 5ghz band. Only way to fix it is to change your channel on the router of your 5ghz band below I think channel 149 is what solved it for me.
Astro told me this:
Our A50 Wireless Headset uses 5.8GHz wireless which runs on the frequencies between 48 and 116. I would advise either setting your router to automatic channel selector or selecting a channel lower or higher than these which should stop any interference you may be encountering.
So merlin, with smart conncet on we can`t change the radio frequence, is there any way to let smart connect and solve this?
Thanks
So far router is working really well . No disconnects , but not using smart connect , signal reaches spots no other router has reached , much stronger signal , inssider rssi reading of 40 where I got 56 before on 2.4 , 48 where I was getting 66 on 5 ghz radio . Setting up with 3 ssid and assigning the clients manually is working well , the AC clients are blazing fast on radio 5.2 , phones and pads on 5.1 and the other mixed n clients on 2.4 , nobody complaining , all getting much better rates than before on the N-66 and AC-66 .
Next purchase will be router with 4 radios with 8 antenna I suppose
I got better connection/transfer rates using the N-66 , even with AC clients than I did using the AC=66 , so I used the N-66 as router , the AC-66 as media bridge .Most the clients are 30 feet from the router with walls , floors and windows between , the N-66 had better range and stronger signal than the AC-66 , the 3200 beats them both transfer rates have more than doubled on all clients , connection speed as well . Very happy now that I found the problems on 2 of my clients I did all the testing on .The speeds you got before -were they the same on both the N-66 and the AC-66?
firmware version 3.0.0.4.378_4129
Welcome To SNBForums
SNBForums is a community for anyone who wants to learn about or discuss the latest in wireless routers, network storage and the ins and outs of building and maintaining a small network.
If you'd like to post a question, simply register and have at it!
While you're at it, please check out SmallNetBuilder for product reviews and our famous Router Charts, Ranker and plenty more!