AutoBW: Automatically set QoS bandwidth using spdMerlin

bluzfanmr1 · Apr 14, 2020

Jack Yaz said:
Hotfix pushed for spdmerlin, please update. This should resolve errors in AutoBW. (why SQLite exports csvs with DOS line endings when running in a Unix environment is beyond me...)

This partially fixed my issue but I'm still getting syntax errors on the bottom half of the results (see below). I am also getting a chmod error when running the curl command, and which I just run manually to fix:

Code:

curl "https://raw.githubusercontent.com/squidbillyms/AutoBW/master/AutoBW" -o /jffs/scripts/AutoBW && chmod 755 AutoBW
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100 16470  100 16470    0     0  24954      0 --:--:-- --:--:-- --:--:-- 29463
chmod: AutoBW: No such file or directory

Code:

/jffs/scripts/AutoBW

 TEST MODE: No changes will be made.

               ---------------- SPDMERLIN -------------
                 Download (Kbps)       Upload (Kbps)
               -------------------  -------------------
Test  1 of  2       92129.3               6062.1
Test  2 of  2       91392.0               5969.9
Average             91760.6               6016.0
Scale Factors          0.85                 0.85
Scaled Speeds       77996.5               5113.6

               ----------------- QOS ----------------
                 Download (Kbps)      Upload (Kbps)
               -------------------  -----------------
Previous              86016.0              5632.0
New (from above)      77996.5              5113.6
Scaling by              0.907               0.908

              ====================================== DOWNLOAD ======================================
               ----------------- RATE -----------------    ----------------- CEIL -----------------
Class            Previous (Kbps)        New (Kbps)           Previous (Kbps)         New (Kbps)
-----          -------------------  -------------------    -------------------  -------------------
(standard_in) 1: syntax error
(standard_in) 1: syntax error
 0                        0.0                0.0                       0.0                0.0

              ======================================= UPLOAD =======================================
               ----------------- RATE -----------------    ----------------- CEIL -----------------
Class            Previous (Kbps)        New (Kbps)           Previous (Kbps)         New (Kbps)
-----          -------------------  -------------------    -------------------  -------------------
(standard_in) 1: syntax error
(standard_in) 1: syntax error
 0                        0.0                0.0                       0.0                0.0

 TEST MODE: No changes were made.

maghuro · Apr 14, 2020

bluzfanmr1 said:

This partially fixed my issue but I'm still getting syntax errors on the bottom half of the results (see below). I am also getting a chmod error when running the curl command, and which I just run manually to fix:

Code:

curl "https://raw.githubusercontent.com/squidbillyms/AutoBW/master/AutoBW" -o /jffs/scripts/AutoBW && chmod 755 AutoBW
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100 16470  100 16470    0     0  24954      0 --:--:-- --:--:-- --:--:-- 29463
chmod: AutoBW: No such file or directory

Code:

/jffs/scripts/AutoBW

 TEST MODE: No changes will be made.

               ---------------- SPDMERLIN -------------
                 Download (Kbps)       Upload (Kbps)
               -------------------  -------------------
Test  1 of  2       92129.3               6062.1
Test  2 of  2       91392.0               5969.9
Average             91760.6               6016.0
Scale Factors          0.85                 0.85
Scaled Speeds       77996.5               5113.6

               ----------------- QOS ----------------
                 Download (Kbps)      Upload (Kbps)
               -------------------  -----------------
Previous              86016.0              5632.0
New (from above)      77996.5              5113.6
Scaling by              0.907               0.908

              ====================================== DOWNLOAD ======================================
               ----------------- RATE -----------------    ----------------- CEIL -----------------
Class            Previous (Kbps)        New (Kbps)           Previous (Kbps)         New (Kbps)
-----          -------------------  -------------------    -------------------  -------------------
(standard_in) 1: syntax error
(standard_in) 1: syntax error
 0                        0.0                0.0                       0.0                0.0

              ======================================= UPLOAD =======================================
               ----------------- RATE -----------------    ----------------- CEIL -----------------
Class            Previous (Kbps)        New (Kbps)           Previous (Kbps)         New (Kbps)
-----          -------------------  -------------------    -------------------  -------------------
(standard_in) 1: syntax error
(standard_in) 1: syntax error
 0                        0.0                0.0                       0.0                0.0

 TEST MODE: No changes were made.

@squidbilly insists to give the wrong command

The correct is

Code:

curl "https://raw.githubusercontent.com/squidbillyms/AutoBW/master/AutoBW" -o /jffs/scripts/AutoBW && chmod 755 /jffs/scripts/AutoBW

bluzfanmr1 · Apr 14, 2020

maghuro said:
@squidbilly insists to give the wrong command

The correct is

Code:

curl "https://raw.githubusercontent.com/squidbillyms/AutoBW/master/AutoBW" -o /jffs/scripts/AutoBW && chmod 755 /jffs/scripts/AutoBW

Thanks, that worked.

TechTinkerer · Apr 15, 2020

@squidbilly @maghuro @peepsnet What would be the best way of setting the config up as will most likely be using for streaming over vpn?

I currently get all C score on bufferbloat speedtest etc that was over vpn
over wan I got A C A+

so what's the best way of going about this to improve things?

Thanks guys

Wolfschiesst · Apr 16, 2020

maghuro said:
@squidbilly insists to give the wrong command

The correct is

Code:

curl "https://raw.githubusercontent.com/squidbillyms/AutoBW/master/AutoBW" -o /jffs/scripts/AutoBW && chmod 755 /jffs/scripts/AutoBW

@maghuro: Sorry but this is not loading the latest 2.0 version with the recently added command-line parameter functions, but 1.5.
You might consider using the following link to get version 2.0:

Code:

curl "https://raw.githubusercontent.com/squidbillyms/AutoBW/development/AutoBW" -o /jffs/scripts/AutoBW && chmod 755 AutoBW

maghuro · Apr 16, 2020

Wolfschiesst said:
@maghuro: Sorry but this is not loading the latest 2.0 version with the recently added command-line parameter functions, but 1.5.
You might consider using the following link to get version 2.0:

Code:

curl "https://raw.githubusercontent.com/squidbillyms/AutoBW/development/AutoBW" -o /jffs/scripts/AutoBW && chmod 755 AutoBW

Yes, that link is for stable version

maghuro · Apr 16, 2020

TechTinkerer said:
@squidbilly @maghuro @peepsnet What would be the best way of setting the config up as will most likely be using for streaming over vpn?

I currently get all C score on bufferbloat speedtest etc that was over vpn
over wan I got A C A+

so what's the best way of going about this to improve things?

Thanks guys

You have to put 85-90% of the speed you get over vpn.
Usually over vpn speeds are a little bit lower.

In my case, I have a 40/1 connection.
When I connect through vpn, I usually have 35/1 Mbps, so I manually put my qos values to 33/0.8 Mbps.

Yes, I live in Portugal, 5 km away from a big city, and this is the best connection I have.

When you see on news that Portugal is in the front of innovation, remember.... Only in the two biggest cities in the country. The rest of the country, and particularly the region of Alentejo where I live (known to be the stupid people in country), is mostly forgotten.

TechTinkerer · Apr 16, 2020

maghuro said:
You have to put 85-90% of the speed you get over vpn.
Usually over vpn speeds are a little bit lower.

In my case, I have a 40/1 connection.
When I connect through vpn, I usually have 35/1 Mbps, so I manually put my qos values to 33/0.8 Mbps.

Yes, I live in Portugal, 5 km away from a big city, and this is the best connection I have.

When you see on news that Portugal is in the front of innovation, remember.... Only in the two biggest cities in the country. The rest of the country, and particularly the region of Alentejo where I live (known to be the stupid people in country), is mostly forgotten.

Thanks maghuro, does that mean i have to setup spdmerlin and autobw to use vpnclient?

maghuro · Apr 16, 2020

TechTinkerer said:
Thanks maghuro, does that mean i have to setup spdmerlin and autobw to use vpnclient?

Yes, if you are using your vpn connection to use the internet, that's the best idea.

Kingp1n · Apr 21, 2020

When will 2.0 go live or is it still being tested?

squidbilly · Apr 23, 2020

Kingp1n said:
When will 2.0 go live or is it still being tested?

I will update it in a few days. Still making a few minor changes. (nothing big or major)

TechTinkerer · Apr 23, 2020

squidbilly said:
I will update it in a few days. Still making a few minor changes. (nothing big or major)

Will this have the vpn support like 1.5?

QuikSilver · Apr 26, 2020

Does this script auto update the QOS values when Speedmerlin runs or does it when AutoBW is done manually?

Kingp1n · Apr 26, 2020

QuikSilver said:
Does this script auto update the QOS values when Speedmerlin runs or does it when AutoBW is done manually?

I think its manual cause I havent seen it update at all...unless you have to setup internally.

QuikSilver · Apr 26, 2020

Kingp1n said:
I think its manual cause I havent seen it update at all...unless you have to setup internally.

I did see the option to take average of last 10 spdmerlin test which helps but was curious if there is a way to have it run a cron job with spdmerlin and update QOS values dynamically. I'd imagine with more people staying home no one is getting a consistent speed these days.

joe scian · Apr 28, 2020

Hi

I moved the stats from Jffs to Usb in the menu for SpdMerlin. Since doing that I now get the error below when executing the AutoBW script.

Code:

ERROR: spdMerlin stats not found.
      Try again in a minute or two.
      If it still fails try running 'spdmerlin' first

visortgw · Apr 28, 2020

joe scian said:
Hi

I moved the stats from Jffs to Usb in the menu for SpdMerlin. Since doing that I now get the error below when executing the AutoBW script.

Code:

ERROR: spdMerlin stats not found. Try again in a minute or two. If it still fails try running 'spdmerlin' first

Same here. It appears that AutoBW doesn't recognize the new location of spdMerlin stats. Simply move the config and stats back to jffs until it is resolved.

Jack Yaz · Apr 29, 2020

Ah, I forgot about AutoBW... Sorry! I can submit a PR later to cope with the changes

Jack Yaz · Apr 29, 2020

Jack Yaz said:
Ah, I forgot about AutoBW... Sorry! I can submit a PR later to cope with the changes

@squidbilly https://github.com/squidbillyms/AutoBW/pull/10

Jack Yaz · May 25, 2020

I'll need to fix this up again, but has the OP gone MIA?

Thread starter	Title	Forum	Replies	Date
M	AdGuardHome Use DNS encryption automatically via AdGuard DHCP server	Asuswrt-Merlin AddOns	2	Friday at 2:31 PM
B	Unbound Does unbound update automatically?	Asuswrt-Merlin AddOns	8	Sep 8, 2024
	vpnmgr Can I route all Guest Wifi clients to VPN automatically? [SOLVED]	Asuswrt-Merlin AddOns	3	Dec 15, 2023
	Diversion Need help with selecting new set of filter lists / block lists for Diversion 5.0	Asuswrt-Merlin AddOns	21	Dec 27, 2023

AutoBW: Automatically set QoS bandwidth using spdMerlin

Senior Member

Very Senior Member

Senior Member

Senior Member

Occasional Visitor

Very Senior Member

Very Senior Member

Senior Member

Very Senior Member

Very Senior Member

Occasional Visitor

Senior Member

Very Senior Member

Very Senior Member

Very Senior Member

Very Senior Member

Very Senior Member

Part of the Furniture

Part of the Furniture

Part of the Furniture

Similar threads

Similar threads

Support SNBForums w/ Amazon

Sign Up For SNBForums Daily Digest