Here is the last week of history on my AX88U using Express VPN. Typically getting between 100 and 150 Mbps. Some of the low spots are probably caused by inbound traffic while spdMerlin is running its test. I could probably fine tune it to maximize throughput by searching through different servers, but the one I’m connected to has been extremely reliable.
AC86U should be similar in speeds as it has similar CPU architecture. Both can theoretically do over 250. Before the pandemic I had seen results as high as 220 Mbps.
If you’re looking to go with a wifi 6 router, I highly recommend the AX88U with Merlin installed. It’s a beast.
VPN performance will be identical with both of these.
@JamesM that would be the RMerlin powered RT-AC86U and the RT-AX88U. Check your budget and then empty your pockets.
@JamesM that would be the RMerlin powered RT-AC86U and the RT-AX88U. Check your budget and then empty your pockets.
Thanks - I ran a mesh setup as the kids were having signal issues in their rooms.Technically yes, you can. In practice, it has already shown to cause issues when the firmware versions are significantly different between them.
Here is the last week of history on my AX88U using Express VPN. Typically getting between 100 and 150 Mbps. Some of the low spots are probably caused by inbound traffic while spdMerlin is running its test. I could probably fine tune it to maximize throughput by searching through different servers, but the one I’m connected to has been extremely reliable.
AC86U should be similar in speeds as it has similar CPU architecture. Both can theoretically do over 250. Before the pandemic I had seen results as high as 220 Mbps.
If you’re looking to go with a wifi 6 router, I highly recommend the AX88U with Merlin installed. It’s a beast.
Thanks guys.
Can I use a AX88U with AI Mesh but with a non merlin node?
IE AX88U as router and AX92U (not merlin compat.) as a node?
What's application selective routing?
Thanks - I ran a mesh setup as the kids were having signal issues in their rooms.
If I wanted to go crazy could I run two merlin AX88U's in a mesh witout issues?
Well yes, but AiMesh is often problematic.
Even so I've been fairly successful using it, currently AX88U main and AX11000 as a node.
I don't have any AX92Us so don't know about those.
For the selective routing see https://www.snbforums.com/threads/x3mrouting-selective-routing-for-asuswrt-merlin-firmware.57793/.
Basically it provides ways to construct lists of IP addresses to use for routing applications (streaming services) via a VPN, or not, for particular VPN client devices.
Ian
Sure, if you went crazy.
Just know that AiMesh currently doesn't extend the Guest networks (only the main router will be broadcasting those).
Thanks, I'll check out the link.
So you have Merlin on the AX88U and normal FW on the AX11000?
Welcome To SNBForums
SNBForums is a community for anyone who wants to learn about or discuss the latest in wireless routers, network storage and the ins and outs of building and maintaining a small network.
If you'd like to post a question, simply register and have at it!
While you're at it, please check out SmallNetBuilder for product reviews and our famous Router Charts, Ranker and plenty more!