CakeQOS CakeQOS-Merlin

Chris0815 · Jul 5, 2020

ugandy said:
how I installed it:

Thank you very much! I also tried to use this scripts but was not able to get it working. Until now!
I followed your lines and the first trail was working! I will try to use this for adjusting Cake. So with this I can adjust Cake not being physically there (via VPN Server)...
Before I ssh'd in into the router and started a ping command and looked at the results during a spdMerlin speedtest. But using this script for adjusting Cake makes it easier. At least for me. Thanks again!

XIII · Jul 5, 2020

So CakeQOS does seem to improve my latency after all!

Without CakeQOS:

Code:

 Download: 244.14 Mbps
  Latency: (in msec, 59 pings, 0.00% packet loss)
      Min: 7.666
    10pct: 10.653
   Median: 22.835
      Avg: 67.547
    90pct: 240.734
      Max: 248.053
............................................................
   Upload: 25.43 Mbps
  Latency: (in msec, 59 pings, 0.00% packet loss)
      Min: 8.453
    10pct: 23.154
   Median: 32.368
      Avg: 31.307
    90pct: 35.969
      Max: 37.449

With CakeQOS:

Code:

Download: 202.32 Mbps
  Latency: (in msec, 60 pings, 0.00% packet loss)
      Min: 8.565
    10pct: 8.861
   Median: 10.263
      Avg: 10.600
    90pct: 12.531
      Max: 14.997
............................................................
   Upload: 20.56 Mbps
  Latency: (in msec, 60 pings, 0.00% packet loss)
      Min: 10.174
    10pct: 11.276
   Median: 12.804
      Avg: 13.319
    90pct: 16.255
      Max: 18.946

Using these settings:

Code:

[1]  --> Download Speed             | [225 Mbit]
[2]  --> Upload Speed               | [22 Mbit]
[3]  --> Queue Priority             | [besteffort]
[4]  --> Extra Download Options     | [docsis ack-filter]
[5]  --> Extra Upload Options       | [docsis ack-filter]

Now I need to figure out whether it's worth giving up bandwidth for better latency...

ugandy · Jul 5, 2020

XIII said:

So CakeQOS does seem to improve my latency after all!

Without CakeQOS:

Code:

 Download: 244.14 Mbps
  Latency: (in msec, 59 pings, 0.00% packet loss)
      Min: 7.666
    10pct: 10.653
   Median: 22.835
      Avg: 67.547
    90pct: 240.734
      Max: 248.053
............................................................
   Upload: 25.43 Mbps
  Latency: (in msec, 59 pings, 0.00% packet loss)
      Min: 8.453
    10pct: 23.154
   Median: 32.368
      Avg: 31.307
    90pct: 35.969
      Max: 37.449

With CakeQOS:

Code:

Download: 202.32 Mbps
  Latency: (in msec, 60 pings, 0.00% packet loss)
      Min: 8.565
    10pct: 8.861
   Median: 10.263
      Avg: 10.600
    90pct: 12.531
      Max: 14.997
............................................................
   Upload: 20.56 Mbps
  Latency: (in msec, 60 pings, 0.00% packet loss)
      Min: 10.174
    10pct: 11.276
   Median: 12.804
      Avg: 13.319
    90pct: 16.255
      Max: 18.946

Using these settings:

Code:

[1]  --> Download Speed             | [225 Mbit]
[2]  --> Upload Speed               | [22 Mbit]
[3]  --> Queue Priority             | [besteffort]
[4]  --> Extra Download Options     | [docsis ack-filter]
[5]  --> Extra Upload Options       | [docsis ack-filter]

Now I need to figure out whether it's worth giving up bandwidth for better latency...

from what i found online, you only need the ack-filter on the upload (you have enough bandwidth on the download). also you might get same results even if you bump the DL up to 240... did you also experiment with 0/0?
BTW cake is meant to help with latency, but also with fairness when you have all your router's clients uploading/downloading/streaming/etc simultaneously

heysoundude · Jul 6, 2020

XIII said:
So CakeQOS does seem to improve my latency after all!

Now I need to figure out whether it's worth giving up bandwidth for better latency...

It’s like driving on the 401- right lane cruising at the speed limit often gets you sailing past the people stopped in the left “fast” lane. You don’t need speed as much as you think you do.
Better ping/less latency makes for a smoother ride; less stop/go gets you there in less time.

Sent from my iPhone using Tapatalk

dave14305 · Jul 6, 2020

heysoundude said:
It’s like driving on the 401- right lane cruising at the speed limit often gets you sailing past the people stopped in the left “fast” lane. You don’t need speed as much as you think you do.
Better ping/less latency makes for a smoother ride; less stop/go gets you there in less time.

Reminds me of this website: http://trafficwaves.org/

raion969 · Jul 6, 2020

where do i get this nice ping and latency stats ?

ugandy · Jul 6, 2020

raion969 said:
where do i get this nice ping and latency stats ?

Code:

 mkdir -p /jffs/addons/util
 /usr/sbin/curl -s "https://raw.githubusercontent.com/richb-hanover/OpenWrtScripts/master/betterspeedtest.sh" -o "/jffs/addons/util/betterspeedtest.sh"
 chmod +x /jffs/addons/util/betterspeedtest.sh
 opkg install coreutils-mktemp
 opkg install coreutils-seq
 opkg install netperf
 opkg install procps-ng-pgrep
 /jffs/addons/util/betterspeedtest.sh -t 60 -H netperf-west.bufferbloat.net -p 8.8.8.8

raion969 · Jul 6, 2020

does it cost router performance ?

It didnt installed, or how can i open it ?

Is there any way how to show which scripts are installed ?

My router is an Asus RT-AC5300

Jack Yaz · Jul 6, 2020

ugandy said:

Code:

 mkdir -p /jffs/addons/util
 /usr/sbin/curl -s "https://raw.githubusercontent.com/richb-hanover/OpenWrtScripts/master/betterspeedtest.sh" -o "/jffs/addons/util/betterspeedtest.sh"
 chmod +x /jffs/addons/util/betterspeedtest.sh
 opkg install coreutils-mktemp
 opkg install coreutils-seq
 opkg install netperf
 opkg install procps-ng-pgrep
 /jffs/addons/util/betterspeedtest.sh -t 60 -H netperf-west.bufferbloat.net -p 8.8.8.8

its a shame netperf has such limited locations for public test servers which will probaby affect non-US results =[

ugandy · Jul 6, 2020

raion969 said:
does it cost router performance ?

It didnt installed, or how can i open it ?

Is there any way how to show which scripts are installed ?

My router is an Asus RT-AC5300

instructions here:
https://www.snbforums.com/threads/release-cakeqos-merlin.64800/

visortgw · Jul 6, 2020

Jack Yaz said:
its a shame netperf has such limited locations for public test servers which will probaby affect non-US results =[

Try netperf-eu.bufferbloat.net.

Jack Yaz · Jul 6, 2020

visortgw said:
Try netperf-eu.bufferbloat.net.

denmark still isn't particularly close to cambridge. while distance isn't a massive factor, testing closer servers usually produces better results

JonEngland · Jul 6, 2020

Jack Yaz said:
denmark still isn't particularly close to cambridge. while distance isn't a massive factor, testing closer servers usually produces better results

I'm in UK, and have been getting fairly consistent results using netperf-eu.bufferbloat.net

without CakeQOS

Code:

2020-07-06 20:59:07 Testing against netperf-eu.bufferbloat.net (ipv4) with 5 simultaneous sessions while pinging gstatic.com (60 seconds in each direction)
.................................................................
 Download: 117.76 Mbps
  Latency: (in msec, 65 pings, 0.00% packet loss)
      Min: 21.224
    10pct: 96.982
   Median: 401.530
      Avg: 365.693
    90pct: 492.280
      Max: 515.735
.................................................................
   Upload: 10.58 Mbps
  Latency: (in msec, 65 pings, 0.00% packet loss)
      Min: 15.426
    10pct: 43.055
   Median: 56.706
      Avg: 54.064
    90pct: 62.067
      Max: 68.906

with CakeQOS

Code:

2020-07-06 21:04:07 Testing against netperf-eu.bufferbloat.net (ipv4) with 5 simultaneous sessions while pinging gstatic.com (60 seconds in each direction)
................................................................
 Download: 97.82 Mbps
  Latency: (in msec, 65 pings, 0.00% packet loss)
      Min: 14.775
    10pct: 15.279
   Median: 18.378
      Avg: 19.176
    90pct: 22.242
      Max: 36.572
.................................................................
   Upload: 9.11 Mbps
  Latency: (in msec, 65 pings, 0.00% packet loss)
      Min: 13.231
    10pct: 14.165
   Median: 18.261
      Avg: 19.120
    90pct: 24.134
      Max: 33.956

Wade Coxon · Jul 6, 2020

raion969 said:
does it cost router performance ?

It didnt installed, or how can i open it ?

Is there any way how to show which scripts are installed ?

My router is an Asus RT-AC5300

Everything you need to know is linked in the first post of this thread.

More importantly though, the ac5300 isn't a supported router.

raion969 · Jul 7, 2020

so i also cannot install this script to test the latency ? is there any other scripts that test the same?

Wade Coxon · Jul 7, 2020

raion969 said:
so i also cannot install this script to test the latency ? is there any other scripts that test the same?

You can install the ping and latency test tool using the instructions in @ugandy 's post here:
https://www.snbforums.com/threads/release-cakeqos-merlin.64800/page-46#post-600639

I was talking about cake being incompatible with your router model.
I didn't realise you were asking about the ping test script costing router performance. In answer to that, no, it just lets you run a short test.

raion969 · Jul 7, 2020

i did try to install that script but it says not found on each installation code, does this code also support the asus rtac5300

Wade Coxon · Jul 7, 2020

raion969 said:
i did try to install that script but it says not found on each installation code, does this code also support the asus rtac5300

You need to have USB storage configured on the router, and have installed entware in order to install addon packages.

raion969 · Jul 7, 2020

Is this the best way to test internet latency/jitter ping all that matter also for online gaming?

Or is connmon and spd Merlin better?

ttgapers · Jul 7, 2020

raion969 said:
Is this the best way to test internet latency/jitter ping all that matter also for online gaming?

Or is connmon and spd Merlin better?

They are complementary....have a look at tests here, but none of the above tools you noted tests bufferbloat. From Post 1 in this thread.

https://www.bufferbloat.net/projects/bloat/wiki/Tests_for_Bufferbloat/

Thread starter	Title	Forum	Replies	Date
M	CAKEQOS/FLEXQOS Advise/Guidance/Best Practice	Asuswrt-Merlin AddOns	34	Aug 11, 2024
S	CakeQOS CakeQOS for Gaming?	Asuswrt-Merlin AddOns	41	Mar 23, 2024
R	Asus ASUS RT-AX88U PRO AX6000, Merlin, Tailscale	Asuswrt-Merlin AddOns	0	Dec 8, 2024
C	Entware Channel change with Entware on Merlin	Asuswrt-Merlin AddOns	0	Nov 5, 2024
R	Entware Asus-Merlin 388.8 GT-AX11000 Entware v2RayA package error	Asuswrt-Merlin AddOns	2	Sep 27, 2024
	vnStat vnStat on Merlin 386.14 missing scrollbar bug	Asuswrt-Merlin AddOns	13	Sep 21, 2024
L	AX88U Pro with Merlin + AdGuard + Tailscale	Asuswrt-Merlin AddOns	1	Aug 21, 2024
	amtm amtm 5.1 - the Asuswrt-Merlin Terminal Menu, December 09, 2024	Asuswrt-Merlin AddOns	69	Aug 17, 2024
J	Entware Possible to install jdownloader on asuswrt-merlin router with entware??	Asuswrt-Merlin AddOns	9	Aug 7, 2024
S	FTDI Serial Port Settings Using Virtual Here Server on Asus Merlin	Asuswrt-Merlin AddOns	0	Jul 31, 2024

CakeQOS CakeQOS-Merlin

Regular Contributor

Very Senior Member

Very Senior Member

Part of the Furniture

Part of the Furniture

Senior Member

Very Senior Member

Senior Member

Part of the Furniture

Very Senior Member

Very Senior Member

Part of the Furniture

Regular Contributor

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Similar threads

Similar threads

Support SNBForums w/ Amazon

Sign Up For SNBForums Daily Digest