Entaware error after update

[StefanoN]

Hello
After the update of Entaware do yesterday from amtm, when I check if some update exist, during the Entaware check I see this error:
! Entware: bin.entware.net unreachable
Third party script update(s) available! Use
the scripts own update function to update.

How can I resolve the problem ?

Sorry... router rt-ac86u with last alfa 384.18

Thanks
Stefano

 

[dave14305]

Entware server is down, as reported in Diversion thread (see original issue on Github)

https://github.com/Entware/Entware/issues/486

 

[StefanoN]

Entware server is down, as reported in Diversion thread (see original issue on Github)

https://github.com/Entware/Entware/issues/486

Thanks
I did not know

 

[AntonK]

Entware server is down, as reported in Diversion thread (see original issue on Github)

https://github.com/Entware/Entware/issues/486

Do you think this is the link we should monitor for mention of a recovery?

Thanks,
Anton

 

[icehacker]

any eta when it would be up

 

[L&LD]

Hardware failure. It will take a while.

 

[RMerlin]

Hardware failure. It will take a while.

VPS FTW.

 

[cxadslfkj9w]

bin.entware.com appears to be back up.

ETA: Well, almost back up...

I now get a 404 error trying to fetch http://bin.entware.net/armv7sf-k2.6/armv7sf-k2.6/pixelserv-tls_2.3.1-1_armv7-2.6.ipk

Looks like a my config is off, there's an issue in my pixelserv install, or indeed a whole https://bin.entware.net/armv7sf-k2.6/armv7sf-k2.6/ directory is missing.

 

[Jeffrey Young]

Concur, wget reports error 8. My guess is that they are still working on restoration. We just need to be patient.

Edit: Sorry, the wget error is coming up when a opkg upgrade is run.

 

[Jack Yaz]

http://bin.entware.net/armv7sf-k2.6/armv7sf-k2.6/pixelserv-tls_2.3.1-1_armv7-2.6.ipk should be http://bin.entware.net/armv7sf-k2.6/pixelserv-tls_2.3.1-1_armv7-2.6.ipk

 

[cxadslfkj9w]

http://bin.entware.net/armv7sf-k2.6/armv7sf-k2.6/pixelserv-tls_2.3.1-1_armv7-2.6.ipk should be http://bin.entware.net/armv7sf-k2.6/pixelserv-tls_2.3.1-1_armv7-2.6.ipk

Thanks @Jack Yaz ! I agree, but don't see where that's set.

For context, I was in the middle of an update when entware.net went down yesterday. I uninstalled Diversion, but the Entware install wasn't properly/cleanly removed. When I try to reinstall Diversion today, the pixelserv install fails because of the error above. Any thoughts on where the duplicate portion of the path is coming from or how to clean up?

 

[Jack Yaz]

Not sure, try checking what you have set in /opt/etc/opkg.conf

 

[muffintastic]

Still down. can't install p7zip i get this error;

admin@RTAC68U:/tmp/home/root# opkg install p7zip
Installing p7zip (16.02-3) to root...
Downloading http://bin.entware.net/armv7sf-k2.6/armv7sf-k2.6/p7zip_16.02-3_armv7-2.6.ipk
Collected errors:
 * opkg_download: Failed to download http://bin.entware.net/armv7sf-k2.6/armv7sf-k2.6/p7zip_16.02-3_armv7-2.6.ipk, wget returned 8.
 * opkg_install_pkg: Failed to download p7zip. Perhaps you need to run 'opkg update'?
 * opkg_install_cmd: Cannot install package p7zip.
admin@RTAC68U:/tmp/home/root#

Output of opkg update:

admin@RTAC68U:/tmp/home/root# opkg update
Downloading http://bin.entware.net/armv7sf-k2.6/Packages.gz
Updated list of available packages in /opt/var/opkg-lists/entware
admin@RTAC68U:/tmp/home/root#

Opkg.conf

src/gz entware http://bin.entware.net/armv7sf-k2.6
dest root /
dest ram /opt/tmp
lists_dir ext /opt/var/opkg-lists
option tmp_dir /opt/tmp
arch all 100
arch armv7-2.6 160

 

[Jeffrey Young]

The source directory in opkg.conf looks ok to me.

Trying to upgrade entware via amtm or by shell (opkg update, opkg upgrade) both fail (wget returns 8)

I was able to upgrade by running

wget -qO - http://pkg.entware.net/binaries/mipsel/installer/upgrade.sh | sh

 

[thelonelycoder]

http://bin.entware.net/armv7sf-k2.6/armv7sf-k2.6/pixelserv-tls_2.3.1-1_armv7-2.6.ipk should be http://bin.entware.net/armv7sf-k2.6/pixelserv-tls_2.3.1-1_armv7-2.6.ipk

It's not recommended, but if one fixes this at the wrong place, the manual update runs just fine.
As I said elsewhere, wait until the Repo is fully restored before attempting to update, manually or not.

 

[muffintastic]

wget -qO - http://pkg.entware.net/binaries/armv7/installer/entware.armv7-upgrade.sh | sh

Mine is an arm based router, 68U, ran the command, updates, but can't run opkg install p7zip etc i get error 8 wget.

 

[Jack Yaz]

It's not recommended, but if one fixes this at the wrong place, the manual update runs just fine.
As I said elsewhere, wait until the Repo is fully restored before attempting to update, manually or not.

what i'm unsure about is why it seems to be duplicating the architecture/kernel!

 

[cxadslfkj9w]

It's not recommended, but if one fixes this at the wrong place, the manual update runs just fine.
As I said elsewhere, wait until the Repo is fully restored before attempting to update, manually or not.

This seems like the best path forward to me as well.

Looks like repo updates are underway as of about 15 mins ago my time:

Index of /armv7sf-k2.6/installer/
../
alternative.sh 20-Jun-2020 08:55 2765
generic.sh 20-Jun-2020 08:55 2765
ld-2.23.so 12-Jun-2020 20:24 142760
libc-2.23.so 12-Jun-2020 20:24 1219224
libgcc_s.so.1 12-Jun-2020 20:24 44456
libpthread-2.23.so 12-Jun-2020 20:24 92648
opkg 12-Jun-2020 20:24 764988
opkg.conf 20-Jun-2020 08:47 171​

 

[randomName]

Does Entware have it's own thread and guide on how to use it?

Thanks

 

[thelonelycoder]

Does Entware have it's own thread and guide on how to use it?

Thanks

No, but entering this into the terminal is all you need:

opkg --help