FlexQoS FlexQoS 1.4.4 - Flexible QoS Enhancement Script for Adaptive QoS

[BoostOver]

Can you specify what's broken in the 3006 firmware (Adaptive QoS)? I read this awhile ago but it didn't go into any specific detail. Any info is greatly appreciated!

I m not a coder:
https://www.snbforums.com/threads/gt-be98-fw-3-0-0-6-102_34372-adaptive-qos-broken.90873/post-916885

 

[zli]

Hello everyone, I have successfully installed FlexQoS on Tuf Ax5400. I don't know if anyone has noticed, but on Adaptive Qos I never get an A+ on the Bufferbloat test. Speed Test also has bad parameters. Latency is always high. My speeds from ISP are 400Down and 400Up. I set it manually on Adaptive to 100 and 100. The measurement always shows a bad download somewhere around 50mbps, while the upload is a little more accurate. Another problem I have is that in 40% of cases, FlexQos does not recognize the Gaming Application. It does not register Gaming at all and loads the General parameters (whatever that means), but Gaming is active. The game is online all the time and then the next game is recognized by Gaming and shows good . Is there a possibility to make Adaptive Qos a little more stable like Traditional and Cake Qos when the same speeds are set?

 

[dave14305]

I have successfully installed FlexQoS on Tuf Ax5400

There could be problems unique to Gnuton firmware.

on Adaptive Qos I never get an A+ on the Bufferbloat test

If it makes you feel better, I never do either, unless I’m using an OpenWrt or OPNsense router for QoS.

My speeds from ISP are 400Down and 400Up. I set it manually on Adaptive to 100 and 100. The measurement always shows a bad download somewhere around 50mbps,

You mean you only get half the throughput (50 Mbps) when you set it for 100 Mbps? Or do you mean you see 50ms latency?

FlexQos does not recognize the Gaming Application

Unless you created a specific iptables rule for Gaming, all the recognition is done by Adaptive QoS.

 

[zli]

Thanks for the reply. The problem is only with Adaptive Qos. It is always unstable. I have no problems with Traditional and Cake Qos. Buffer is ok. Latency is acceptable. I just don't understand why Adeptiv Qos is always so unstable. Again, that function is supposedly for Gaming and should be the most stable. What I want to say is that : Manual internet speed adjustment does not work at all on Adaptive Qos. I did everything as explained here: https://github.com/dave14305/FlexQoS/blob/master/README.md
That's right - when I set 100Mbps, it shows 50Mbps on the Laptop, phone, etc. and on Play Station 5 it shows 160Mbps and I set the limit to 100Mbps on the router. Hahahah Adaptive Qos is totally broken. Traditional and Cake, when I set the speed limit to 100Mbps, it never exceeds more than that. why is it like that with Adaptive Qos why is it so broken!? Thanks for every reply