Fork 380.57 HGG-FINAL
- Thread starter muzykcb
- Start date
- Status
L&LD
Part of the Furniture
Yes, that is the latest and works well. No need to wait for the .4 build, except if you need to do a minimal and manual configuration after resetting to factory defaults (depending on the firmware version you're coming from).
L&LD
Part of the Furniture
rickysuper
Occasional Visitor
would reset to default if using telnet or ssh command. new firmware needs JFFS script
https://github.com/kvic-z/goodies-asuswrt/wiki/Overclock-Asuswrt-Merlin-on-v378.56-and-beyond
HallStevenson
Regular Contributor
I'm running merlin's current build, 380.57. Is a full reset necessary?
Also, why does the other poster need to PM hggomes for a link? Is that to get the latest?
Sent from my HTC One M9 using Tapatalk
Also, why does the other poster need to PM hggomes for a link? Is that to get the latest?
Sent from my HTC One M9 using Tapatalk
joegreat
Very Senior Member
Yes, it is!
Read the thread from beginning and you will understand! And: Read this thread - especially the FIRST posting for the link.
HallStevenson
Regular Contributor
I've read most, if not all, of this thread. I know it's, uhhh, "controversial" and no doubt related to that.... 
Oh, I didn't know that. Well, if I OC my N66U someday, I modify CFE and problem solved, permanent OC
L&LD
Part of the Furniture
Latest build 380.57.4 is available for most models.
Upgraded an RT-N66U and an RT-AC66U to 380.57.4 and over OpenVPN the connection is easily twice as responsive. That is with the 'N66U being a client and the 'AC66U being a server with the 'AC66U having an ISP level of service of just 2.5(Down)/0.75(Up) Mbps.
Don't know what hggomes did there, but wow. Very impressed.
Upgraded an RT-N66U and an RT-AC66U to 380.57.4 and over OpenVPN the connection is easily twice as responsive. That is with the 'N66U being a client and the 'AC66U being a server with the 'AC66U having an ISP level of service of just 2.5(Down)/0.75(Up) Mbps.
Don't know what hggomes did there, but wow. Very impressed.
Amazing FW as always.
2.5(Down)/0.75(Up) Mbps... this is the internet speed that you have? On which country?
L&LD
Part of the Furniture
And how much it cost per month?That is the ISP speeds my customer has, in Canada.
With these speeds the client should get money from the ISP...
PhilosopherSe7en
Occasional Visitor
Hi.
This is my first time using any other firmware than the one Asus provide. Is there anything I should do before writing this firmware, or is it just to download and write it?
Is RT-AC66U_380.57.4_HGG-FINAL the one I should use?
This is my first time using any other firmware than the one Asus provide. Is there anything I should do before writing this firmware, or is it just to download and write it?
Is RT-AC66U_380.57.4_HGG-FINAL the one I should use?
L&LD
Part of the Furniture
Around $85, if I remember correctly (that was at least a year ago). This is a 'business' line.
L&LD
Part of the Furniture
Depends on if you have an RT-AC66U.
http://www.snbforums.com/threads/no...l-and-manual-configuration.27115/#post-205573
The above should be done to ensure you have a stable base setup after each firmware update.
Beforehand, remove any USB devices (if any) and reboot the router (always) as noted in the link above.
Business line is different because is guaranteed and that is more expensive.Around $85, if I remember correctly (that was at least a year ago). This is a 'business' line.
I'm lucky in Romania with the internet, we are in top 5 on internet speed. The infrastructure is quite new.
For 6.5 Eur/month I have 300/100. For 10 Eur I can have 1000/200 but is too much for the devices that I have.
2Mbps I had on 1997 at my first job
Coming back to the firmware, so "a lot of internet" that I couldn't use it well before the discovery of HGG FW
Last edited:
IAAI
Very Senior Member
Business line is different because is guaranteed and that is more expensive.
I'm lucky in Romania with the internet, we are in top 5 on internet speed. The infrastructure is quite new.
For 6.5 Eur/month I have 300/100. For 10 Eur I can have 1000/200 but is too much for the devices that I have.
2Mbps I had on 1997 at my first job
Coming back to the firmware, so "a lot of internet" that I couldn't use it well before the discovery of HGG FW
Please don't mention these prices again , we have feelings lol
10 Eur for 1000/200 [emoji23]
Sent from my iPhone using Tapatalk
L&LD
Part of the Furniture
Business line is different because is guaranteed and that is more expensive.
I'm lucky in Romania with the internet, we are in top 5 on internet speed. The infrastructure is quite new.
For 6.5 Eur/month I have 300/100. For 10 Eur I can have 1000/200 but is too much for the devices that I have.
2Mbps I had on 1997 at my first job
Coming back to the firmware, so "a lot of internet" that I couldn't use it well before the discovery of HGG FW
No, business line is not guaranteed. They just know they can stick it to you, that's all.
Yeah, I pay 19,90e/month for 8/1 in Finland.
- Status
Similar threads
Similar threads
| Thread starter | Title | Forum | Replies | Date |
|---|---|---|---|---|
| D | Release GNUton [Official Fork] 388.8_2 Release | Asuswrt-Merlin | 35 | |
| D | Release GNUTON- 388.7_1 release [Official FORK] | Asuswrt-Merlin | 4 | |
| J | How do I use GNUton's fork for my DSL-AX82U please. | Asuswrt-Merlin | 6 |
Similar threads
Latest threads
-
-
-
-
-
ROG Rapture GT-BE19000 - General Questions regarding Game network, and how to optimize
- Started by LowLatency
- Replies: 0
Support SNBForums w/ Amazon
If you'd like to support SNBForums, just use this link and buy anything on Amazon. Thanks!
Sign Up For SNBForums Daily Digest
Get an update of what's new every day delivered to your mailbox. Sign up here!