[Fork] Asuswrt-Merlin 374.43 LTS releases (Archive)

[Adamm]

Is this what you're looking for:

/tmp/home/root# nvram get buildno
374.43

/tmp/home/root# nvram get extendno
41E5j9527

?

Yes thanks.

 

[Adamm]

Great news for our scripters’ latest developments! @Adamm @Jack Yaz

Won’t know how it works until @john9527 posts an announcement or pushes his code to Github.

I've pushed Skynet WebUI support for Johns Fork (Versions 374.43_41+), let me know if everything works as expected.

 

[dev_null]

I've pushed Skynet WebUI support for Johns Fork (Versions 374.43_41+), let me know if everything works as expected.

Skynet still doesn't work on the MIPs builds of Johns' Fork tho, amirite?

 

[Adamm]

Skynet still doesn't work on the MIPs builds of Johns' Fork tho, amirite?

Correct, the kernel is too old unfortunately and doesn't support the required IPSet modules we use.

 

[dev_null]

Correct, the kernel is too old unfortunately and doesn't support the required IPSet modules we use.

Thanks @Adamm. I think I can make some of the legacy P2P scripts from https://github.com/RMerl/asuswrt-merlin/wiki/Legacy-Ipset-Scripts do something similar. I used "P2Partisan" on Tomato with success previously (but that also requires a higher IPSet (6 vs 4).

 

[illus4567]

Installed 374.43_41E5j9527 on my RT-N66U.
Seems to work fine, including OpenVPN.
Thx!

Do you know where I can find 374.43_41E5j9527? Is it in past pages?

 

[Gar]

dev stuff:

https://onedrive.live.com/?authkey=!AKXdaMzjqVKbGsc&id=9332FC159A7E129!1117&cid=09332FC159A7E129

 

[dony71]

Is RT-AC68U rev B2 supported by this firmware?

 

[Gar]

Is RT-AC68U rev B2 supported by this firmware?

see post #1. I realize it doesn't list your revision but I still think it works. Don't recall an exception with yours.

 

[downbeat]

I've been running firmware 374.43_39E3j9527 on a Asus RT-AC66U and have been experiencing issues with the wan simply dying anywhere from 5-21 days.

I ssh directly into the router and try running pings/traceroutes to outside address without success. All outside connections are unreachable. The logs show no issues and the internet status is showing connected within the main page of the network map. I have no issues on the lan side of things when the wan side dies. A reboot of the router solves all issues.

Any suggestions on how to troubleshoot this would be appreciated as I want to get this device stable.

 

[ColinTaylor]

Any suggestions on how to troubleshoot this would be appreciated as I want to get this device stable.

When this happens again try pinging the cable modem's admin interface IP address and the gateway address for the router's WAN interface. Try logging into the cable modem and looking for errors in its log file.

 

[downbeat]

When this happens again try pinging the cable modem's admin interface IP address and the gateway address for the router's WAN interface. Try logging into the cable modem and looking for errors in its log file.

I already have some monitoring scripts running for this. Modem admin page is reachable. Modem logs show no errors. Gateway is down as I can't reach outbound.

Thanks for the tips but this seems to be a specific problem in relation to firmware 374.43_39E3j9527. I may simply need to downgrade versions until I find one that is stable on my setup as I know previous revisions did not exhibit this behaviour.

 

[ColinTaylor]

Gateway is down as I can't reach outbound.

Don't rule out ISP issues. If your WAN interface is up and working (you can log into the modem) but the next hop (your ISP local gateway address) is unreachable that points to an ISP issue IMHO.

 

[ualdrivr]

I'm also running 39E3 and I don't see any other @john9527 updates. I was thinking to go to Merlin 384.14_2 for my 68U. Can I just flush it or a reset is in order? @RMerlin

 

[ColinTaylor]

I'm also running 39E3 and I don't see any other @john9527 updates. I was thinking to go to Merlin 384.14_2 for my 68U. Can I just flush it or a reset is in order? @RMerlin

You'll need to do a factory reset after installing the new firmware.

 

[ualdrivr]

You'll need to do a factory reset after installing the new firmware.

Thanks Colin, that's what I figured.

 

[joe a]

I'm also running 39E3 and I don't see any other @john9527 updates. I was thinking to go to Merlin 384.14_2 for my 68U. Can I just flush it or a reset is in order? @RMerlin

There are some here:
https://onedrive.live.com/?authkey=!AKXdaMzjqVKbGsc&id=9332FC159A7E129!1117&cid=09332FC159A7E129

 

[Swingtop]

I do not trust any non-official release that does not come from John. Until then, 39E3 it is for the time being.

 

[joe a]

I do not trust any non-official release that does not come from John. Until then, 39E3 it is for the time being.

This has been John's development repository, but to each his own.

 

[madfusker]

John last seen May 17th. hmm. Anyone heard from him? I assume if this was his dev repository, there a reason he didn't move a build to stable...