[Fork] Asuswrt-Merlin 374.43 LTS releases (Archive)

underdose · Jan 28, 2020

sto said:
DoT is DNS over TLS, which works on my N66U with John's 39E3 firmware. I'm curious whether it works on the as yet unreleased 41E6 firmware on his development drive. The question was meant for Builder71, but thanks for your reply.

It works with 41E6.

amdpowered · Jan 28, 2020

Updated my AC68U to 41E6. Confirmed webUI is broken. Not sure how to fix...

jrmwvu04 · Jan 28, 2020

amdpowered said:
Updated my AC68U to 41E6. Confirmed webUI is broken. Not sure how to fix...

Broken in what way

Gar · Jan 28, 2020

All working here on 56u.

amdpowered · Jan 28, 2020

jrmwvu04 said:
Broken in what way

The WebUI is unreachable. I'll experiment with flashing back to an older version via CLI later. Otherwise wireless / wired function seems to be unaffected.

Gar · Jan 28, 2020

Tried different browsers and/or clearing cache?

amdpowered · Jan 28, 2020

Gar said:
Tried different browsers and/or clearing cache?

Yep, tried firefox, edge, in normal and private mode. No response from the UI address/port.

a5m · Jan 29, 2020

amdpowered said:
Yep, tried firefox, edge, in normal and private mode. No response from the UI address/port.

Do you have SSH enabled? If so login and issue the following command to restart the WebGUI:

Code:

service restart_httpd

amdpowered · Jan 29, 2020

a5m said:
Do you have SSH enabled? If so login and issue the following command to restart the WebGUI:

Code:

service restart_httpd

Yep, already tried that based on a few pages ago. I don't get the output of something trying to generate keys or loading them. It just says "Done."

dave14305 · Jan 29, 2020

amdpowered said:
Yep, already tried that based on a few pages ago. I don't get the output of something trying to generate keys or loading them. It just says "Done."

What’s in the syslog?

Code:

service restart_httpd
tail -50 /tmp/syslog.log

alfie · Jan 29, 2020

amdpowered said:
Yep, already tried that based on a few pages ago. I don't get the output of something trying to generate keys or loading them. It just says "Done."

Did you change settings for HTTP port?
On my AC66u enabling just https port broke th UI because SSL certificates are not generated.
It is possible to revert settings through SSH and just use HTTP port

Code:

nvram set http_enable=1
nvram commit
service restart_httpd

amdpowered · Jan 29, 2020

alfie said:
Did you change settings for HTTP port?
On my AC66u enabling just https port broke th UI because SSL certificates are not generated.
It is possible to revert settings through SSH and just use HTTP port

Code:

nvram set http_enable=1 nvram commit service restart_httpd

Tried that. Unfortunately I had port 8443 set as the https port. Here is the output of the log.

Code:

Jan 29 19:00:20 watchdog: restart httpd, process not found
Jan 29 19:00:20 rc_service: watchdog 588:notify_rc start_httpd
Jan 29 19:00:20 httpd: start httpd - SSL
Jan 29 19:00:20 syslog: Generating SSL certificate...
Jan 29 19:00:21 httpd: Failed to initialize SSL, generating new key/cert.
Jan 29 19:00:21 syslog: Generating SSL certificate...
Jan 29 19:00:21 httpd: Failed to initialize SSL, generating new key/cert.
Jan 29 19:00:21 httpd: Unable to start in SSL mode, exiting!
Jan 29 19:00:27 rc_service: service 17740:notify_rc restart_httpd
Jan 29 19:00:27 httpd: start httpd - SSL
Jan 29 19:00:27 syslog: Generating SSL certificate...
Jan 29 19:00:27 httpd: Failed to initialize SSL, generating new key/cert.
Jan 29 19:00:27 syslog: Generating SSL certificate...
Jan 29 19:00:28 httpd: Failed to initialize SSL, generating new key/cert.
Jan 29 19:00:28 httpd: Unable to start in SSL mode, exiting!
Jan 29 19:00:50 watchdog: restart httpd, process not found
Jan 29 19:00:50 rc_service: watchdog 588:notify_rc start_httpd
Jan 29 19:00:50 httpd: start httpd - SSL
Jan 29 19:00:50 syslog: Generating SSL certificate...
Jan 29 19:00:51 httpd: Failed to initialize SSL, generating new key/cert.
Jan 29 19:00:51 syslog: Generating SSL certificate...
Jan 29 19:00:51 httpd: Failed to initialize SSL, generating new key/cert.
Jan 29 19:00:51 httpd: Unable to start in SSL mode, exiting!
Jan 29 19:01:20 watchdog: restart httpd, process not found
Jan 29 19:01:20 rc_service: watchdog 588:notify_rc start_httpd
Jan 29 19:01:20 httpd: start httpd - SSL
Jan 29 19:01:21 syslog: Generating SSL certificate...
Jan 29 19:01:21 httpd: Failed to initialize SSL, generating new key/cert.
Jan 29 19:01:21 syslog: Generating SSL certificate...
Jan 29 19:01:21 httpd: Failed to initialize SSL, generating new key/cert.
Jan 29 19:01:21 httpd: Unable to start in SSL mode, exiting!
Jan 29 19:01:21 rc_service: service 18162:notify_rc restart_httpd
Jan 29 19:01:21 httpd: start httpd - SSL
Jan 29 19:01:21 syslog: Generating SSL certificate...
Jan 29 19:01:22 httpd: Failed to initialize SSL, generating new key/cert.
Jan 29 19:01:22 syslog: Generating SSL certificate...
Jan 29 19:01:22 httpd: Failed to initialize SSL, generating new key/cert.
Jan 29 19:01:22 httpd: Unable to start in SSL mode, exiting!

dave14305 · Jan 29, 2020

amdpowered said:

Tried that. Unfortunately I had port 8443 set as the https port. Here is the output of the log.

Code:

Jan 29 19:00:20 watchdog: restart httpd, process not found
Jan 29 19:00:20 rc_service: watchdog 588:notify_rc start_httpd
Jan 29 19:00:20 httpd: start httpd - SSL
Jan 29 19:00:20 syslog: Generating SSL certificate...
Jan 29 19:00:21 httpd: Failed to initialize SSL, generating new key/cert.
Jan 29 19:00:21 syslog: Generating SSL certificate...
Jan 29 19:00:21 httpd: Failed to initialize SSL, generating new key/cert.
Jan 29 19:00:21 httpd: Unable to start in SSL mode, exiting!
Jan 29 19:00:27 rc_service: service 17740:notify_rc restart_httpd
Jan 29 19:00:27 httpd: start httpd - SSL
Jan 29 19:00:27 syslog: Generating SSL certificate...
Jan 29 19:00:27 httpd: Failed to initialize SSL, generating new key/cert.
Jan 29 19:00:27 syslog: Generating SSL certificate...
Jan 29 19:00:28 httpd: Failed to initialize SSL, generating new key/cert.
Jan 29 19:00:28 httpd: Unable to start in SSL mode, exiting!
Jan 29 19:00:50 watchdog: restart httpd, process not found
Jan 29 19:00:50 rc_service: watchdog 588:notify_rc start_httpd
Jan 29 19:00:50 httpd: start httpd - SSL
Jan 29 19:00:50 syslog: Generating SSL certificate...
Jan 29 19:00:51 httpd: Failed to initialize SSL, generating new key/cert.
Jan 29 19:00:51 syslog: Generating SSL certificate...
Jan 29 19:00:51 httpd: Failed to initialize SSL, generating new key/cert.
Jan 29 19:00:51 httpd: Unable to start in SSL mode, exiting!
Jan 29 19:01:20 watchdog: restart httpd, process not found
Jan 29 19:01:20 rc_service: watchdog 588:notify_rc start_httpd
Jan 29 19:01:20 httpd: start httpd - SSL
Jan 29 19:01:21 syslog: Generating SSL certificate...
Jan 29 19:01:21 httpd: Failed to initialize SSL, generating new key/cert.
Jan 29 19:01:21 syslog: Generating SSL certificate...
Jan 29 19:01:21 httpd: Failed to initialize SSL, generating new key/cert.
Jan 29 19:01:21 httpd: Unable to start in SSL mode, exiting!
Jan 29 19:01:21 rc_service: service 18162:notify_rc restart_httpd
Jan 29 19:01:21 httpd: start httpd - SSL
Jan 29 19:01:21 syslog: Generating SSL certificate...
Jan 29 19:01:22 httpd: Failed to initialize SSL, generating new key/cert.
Jan 29 19:01:22 syslog: Generating SSL certificate...
Jan 29 19:01:22 httpd: Failed to initialize SSL, generating new key/cert.
Jan 29 19:01:22 httpd: Unable to start in SSL mode, exiting!

It’s definitely not running since watchdog is trying to restart it. Enable http access only and see what happens at http://192.168.1.1/

Code:

nvram set http_enable=0
nvram commit
service restart_httpd

Also would be telling to run this script and see what errors it might give. It was updated recently so no idea if it still works.

Code:

/usr/sbin/gencert.sh

amdpowered · Jan 29, 2020

dave14305 said:
It’s definitely not running since watchdog is trying to restart it. Enable http access only and see what happens at http://192.168.1.1/

Code:

nvram set http_enable=0 nvram commit service restart_httpd

Also would be telling to run this script and see what errors it might give. It was updated recently so no idea if it still works.

Code:

/usr/sbin/gencert.sh

Hey, that worked! I had tried http_enable=1 before. I would have thought 1 is true. But I guess not?

As for the script, it runs. Don't know if ti actually successfully generated the cert...

Code:

admin@RT-AC68U-D130:/tmp/home/root# /usr/sbin/gencert.sh
.......+++++
.............+++++
Can't load /root/.rnd into RNG
1024:error:2406F079:lib(36):func(111):reason(121):NA:0:Filename=/root/.rnd
You are about to be asked to enter information that will be incorporated
into your certificate request.
What you are about to enter is what is called a Distinguished Name or a DN.
There are quite a few fields but you can leave some blank
For some fields there will be a default value,
If you enter '.', the field will be left blank.
-----
. []:US
. []:.
. []:.
. []:.
. []:.
O []:ASUSWRT-Merlin-LTS
CN []:192.168.1.1
E []:root@localhost

jrmwvu04 · Jan 29, 2020

Edit: obviously running it in a read only location doesn’t work. However, same results as @amdpowered

Code:

admin@RT-AC1900P:/jffs# gencert.sh
..........................+++++
.....................................................................................................+++++
Can't load /root/.rnd into RNG
1024:error:2406F079:lib(36):func(111):reason(121):NA:0:Filename=/root/.rnd
You are about to be asked to enter information that will be incorporated
into your certificate request.
What you are about to enter is what is called a Distinguished Name or a DN.
There are quite a few fields but you can leave some blank
For some fields there will be a default value,
If you enter '.', the field will be left blank.
-----
. []:US
. []:.
. []:.
. []:.
. []:.
O []:ASUSWRT-Merlin-LTS
CN []:10.19.1.1
E []:root@localhost

dave14305 · Jan 29, 2020

amdpowered said:
Hey, that worked! I had tried http_enable=1 before. I would have thought 1 is true. But I guess not?

0=http
1=https
2=both

Andi P · Jan 30, 2020

Builder71 said:
And installed 41E6 on my RT-N66U without problems. Thx John.
https://onedrive.live.com/?authkey=!AKXdaMzjqVKbGsc&id=9332FC159A7E129!1117&cid=09332FC159A7E129

Sorry guys, to "warm this up" again... but is there now a common consensus, this development area on onedrive really belongs to John? And we can highly assume, everything posted there is coming from John?

I am tempted to install latest posted version, but some other voice tells me I should refrain unless I know more...

Thanks
Andi

AndreiV · Jan 30, 2020

I see nothing saying who owns that page , assumptions are never a safe bet.

It is definitely not John's original One Drive page , the link for that is in the first post of this thread.

Andi P · Jan 30, 2020

Well, meanwhile I found in post 9285, John personally published this link long ago.

https://www.snbforums.com/threads/f...lts-releases-v39e3.18914/page-465#post-482576

So I would be inclined to rather trust it after seeing that (unless his account got highjacked).

Andi

AndreiV · Jan 30, 2020

Andi P said:
Well, meanwhile I found in post 9285, John personally published this link long ago.

https://www.snbforums.com/threads/f...lts-releases-v39e3.18914/page-465#post-482576

So I would be inclined to rather trust it after seeing that (unless his account got highjacked).

Andi

Well , that looks legitimate , only one way to find out if it is safe , you would be beta testing anyway

Thread starter	Title	Forum	Replies	Date
D	Release GNUton [Official Fork] 388.8_2 Release	Asuswrt-Merlin	35	Aug 11, 2024
D	Release GNUTON- 388.7_1 release [Official FORK]	Asuswrt-Merlin	4	Jun 10, 2024
J	How do I use GNUton's fork for my DSL-AX82U please.	Asuswrt-Merlin	6	Feb 15, 2024
M	Asuswrt-Merlin with Nextcloud's share folder functionality	Asuswrt-Merlin	1	Dec 16, 2024
	Asuswrt Merlin 3006.102.3 Alpha1 for GT-BE98 Pro	Asuswrt-Merlin	38	Dec 14, 2024
A	ASUSwrt-Merlin connection to modem as Access Point and/or Bridge	Asuswrt-Merlin	6	Dec 10, 2024
	Please add Asuswrt-merlin to GT-BE98 (Non-pro) version	Asuswrt-Merlin	22	Nov 23, 2024
	Release Asuswrt-Merlin 3004.388.8_4 is now available	Asuswrt-Merlin	160	Nov 17, 2024
	Release Asuswrt-Merlin 3006.102.2 is now available for Wifi 7 devices	Asuswrt-Merlin	100	Nov 3, 2024
B	Unable to establish VPN connection to my PiVPN (ovpn) from my Asus RT-AC86U running Asuswrt-Merlin 386.14	Asuswrt-Merlin	1	Oct 27, 2024

[Fork] Asuswrt-Merlin 374.43 LTS releases (Archive)

Regular Contributor

New Around Here

Very Senior Member

Very Senior Member

New Around Here

Very Senior Member

New Around Here

Regular Contributor

New Around Here

Part of the Furniture

Occasional Visitor

New Around Here

Part of the Furniture

New Around Here

Very Senior Member

Part of the Furniture

Occasional Visitor

Very Senior Member

Occasional Visitor

Very Senior Member

Similar threads

Similar threads

Support SNBForums w/ Amazon

Sign Up For SNBForums Daily Digest