RT-AC86U and traffic analyzer

[tigreseis]

I’m at a loss. I have searched about as much as I can. I am running the latest stock firmware. I toggled “traffic analyzer” on, but it does nothing. Traffic Monitor works fine.

I searched and found that “NAT Accleration/HW Acceleration” was the problem, but I found neither of those in the stock firmware.

I do have the trend micro stuff enabled.

 

[vanic]

Check your ntp sync ans system time is ready or not.

 

[Latzz]

I’m at a loss. I have searched about as much as I can. I am running the latest stock firmware. I toggled “traffic analyzer” on, but it does nothing. Traffic Monitor works fine.

I searched and found that “NAT Accleration/HW Acceleration” was the problem, but I found neither of those in the stock firmware.

I do have the trend micro stuff enabled.

Traffic analyzer was properly fixed in 384_20648. Works as it is supposed to be. Its only the web history that stops recording after a couple of days and guessing this will get fixed in the next release.

 

[tigreseis]

The 20648 update did the trick. I had 20647.

 

[arthurlien]

The 20648 update did the trick. I had 20647.

Manual Upgrade :
https://www.asus.com/us/Networking/RT-AC86U/HelpDesk_Download/

Please select the OS type to "Others"

or

Live Upgrade by WebUI.

 

[Annihilator]

Firmware RT-AC86U_384.8_2, after rebooting the router, the traffic analyzer stopped counting traffic. Turning off and turning on the traffic analyzer does not help. What's the problem? Statistics for the days before the reboot is preserved. Further emptiness. Traffic monitor considers the amount of traffic normal.

 

[OzarkEdge]

Firmware RT-AC86U_384.8_2, after rebooting the router, the traffic analyzer stopped counting traffic. Turning off and turning on the traffic analyzer does not help. What's the problem? Statistics for the days before the reboot is preserved. Further emptiness. Traffic monitor considers the amount of traffic normal.

The Trend Micro engine in the stock f/w 3.0.0.4.384_45149 is defective. This may be the issue there. Administration\Privacy\Withdraw will disable all Trend Micro features until a fix is released.

OE