drinkingbird
Part of the Furniture
Thanks a lot for all your support. I have only 50mbit isp Connection, but the wifi and lan transfer seem to be limited with my setup.
I turned off jumbo frames and spanning tree protocoll (because I have a simple lan with only one switch) and switched to adaptive qos . Now both settings are enabled automatically . I will test, if there is an effect on the lan speed.
During my work with the settings I ve tried to enable the Parental Controls - Web & Apps Filters. The button does not have an effect. It is turned to on but no changes on the Interface occurred (even no popup applying settings). If you reload the page it is off again. Reboot doesn't help. Anything that I forgot or could that be a bug in the current 386.9 er firmware?
Thanks a lot for your support. I really appreciate it.
Shouldn't impact wired LAN to LAN transfers either way (wireless to wired maybe, but even then that should be mostly processed in hardware without hardware acceleration enabled). STP is good to leave enabled just in case something gets plugged in wrong, and should not impact your performance. Jumbo frames can actually help throughput if your devices support it, but usually not a big difference.
386.9 most people report requires a full factory reset and manual reconfigure. You may be out of NVRAM so those settings can't save.
If you are not able to get full throughput between two wired LAN devices you need to check your cabling or the drivers on the devices themselves. Could just be a NIC card that isn't capable of doing a full gig, or a hard drive that can't read/write that fast.