Menu
What's new
By:
Filters Better Search

RT-AC87U 2x CPU on 100%

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

D

Dombo

Occasional Visitor
Dear all.
Running a few years great. Latstes merlin on the router.

Only sinds a few eaks trouble and not good working internet.
I see 2x cpu running on 100%.
need a poweroff to get the cpu slowing down.
This works for a few days..

Any one that now how i can see what this problem should be?
ScreenShot035.png
 
I'm seeing near 100% pCPUs running 384.19 on an AC86U... posted about it in the main 384.19 thread. You would have to check the router logs... IDK what's causing it at this point. Hoping others report similar. Stay safe, stay alive. Peace.
 
Do you know the write speed of the USB you're using? Swapping my shirtty one for a better one stopped 100% CPU use for me.
 
... had something similar but on 1 cpu and after a health scan of USB, problem was gone ....
 
GSpock said:
... had something similar but on 1 cpu and after a health scan of USB, problem was gone ....
Click to expand...
ok, scanned drive, cant hurt.
also seeing the high cpu on my ac86u

i am not running any scripts i know of, just a basic setup for years and years... ( have ai protection on ) i have Enable JFFS turned off.
say, what level of my system logs should i have selected ?? default, and log only... just looking for help here with what levels work well.
 
Last edited:
Hi again...
Ni usb on a usb port.
No other settings
After 3 day cpu2 running or 100%
Perhaps you can see something?
ScreenShot171.png


ScreenShot169.png



ScreenShot170.png
 
Run "top" over SSH to see what is using the CPU.
 
sorry... dombo here:
Code: 
Mem: 209032K used, 46644K free, 10200K shrd, 796K buff, 21452K cached
CPU:  0.5% usr  1.1% sys  0.0% nic 48.5% idle 49.0% io  0.0% irq  0.6% sirq
Load average: 5.13 5.14 5.14 2/115 12794
  PID  PPID USER     STAT   VSZ %VSZ CPU %CPU COMMAND
  202     1 DeMeursj R     5140  2.0   1  0.6 nt_center
  179     1 DeMeursj S      652  0.2   0  0.3 tftpd
  295     1 DeMeursj S    11032  4.3   1  0.2 /usr/sbin/lighttpd-monitor
  259     1 DeMeursj S     5328  2.0   0  0.2 watchdog02
  297     1 DeMeursj S     5728  2.2   0  0.1 mastiff
  200   199 DeMeursj S     4980  1.9   0  0.1 nt_monitor
  189     1 DeMeursj S     2604  1.0   0  0.1 protect_srv
12767 12759 DeMeursj R     1428  0.5   1  0.1 top
   36     2 DeMeursj SW       0  0.0   1  0.1 [kworker/1:1]
  634     1 DeMeursj S    14120  5.5   1  0.0 /usr/sbin/lighttpd -f /tmp/lighttpd.conf -D
  254     1 DeMeursj S     6916  2.7   0  0.0 httpd -i br0
  277     1 DeMeursj D     6548  2.5   0  0.0 networkmap --bootwait
  253     1 DeMeursj S     6236  2.4   0  0.0 httpds -s -i br0 -p 8443
  394     1 DeMeursj S     6072  2.3   0  0.0 /usr/sbin/smbd -D -s /etc/smb.conf
  378     1 DeMeursj S     5904  2.3   0  0.0 nmbd -D -s /etc/smb.conf
  414   412 DeMeursj S     5728  2.2   1  0.0 mastiff
  412   297 DeMeursj S     5728  2.2   0  0.0 mastiff
  413   412 DeMeursj S     5728  2.2   0  0.0 mastiff
  379   378 DeMeursj S     5592  2.1   1  0.0 nmbd -D -s /etc/smb.conf
  258     1 DeMeursj S     5392  2.1   1  0.0 watchdog
  197   190 DeMeursj S     5348  2.0   1  0.0 /sbin/netool
  190     1 DeMeursj S     5348  2.0   0  0.0 /sbin/netool
  198   197 DeMeursj S     5348  2.0   0  0.0 /sbin/netool
    1     0 DeMeursj S     5340  2.0   1  0.0 /sbin/preinit
  163     1 DeMeursj S     5332  2.0   0  0.0 /sbin/wanduck
  719     1 DeMeursj S     5328  2.0   1  0.0 bwdpi_wred_alive
  358     1 DeMeursj S     5328  2.0   0  0.0 erp_monitor
  300     1 DeMeursj S     5328  2.0   0  0.0 pctime
  299     1 DeMeursj S     5328  2.0   1  0.0 hour_monitor
  541     1 DeMeursj S     5328  2.0   1  0.0 usbled
  627     1 DeMeursj S     5328  2.0   0  0.0 disk_monitor
  224     1 DeMeursj S     5328  2.0   0  0.0 wpsaide
  298     1 DeMeursj S     5328  2.0   0  0.0 bwdpi_check
   71     1 DeMeursj S     5324  2.0   1  0.0 console
  206   202 DeMeursj S     5140  2.0   0  0.0 nt_center
  207   206 DeMeursj S     5140  2.0   0  0.0 nt_center
  236   199 DeMeursj S     4980  1.9   1  0.0 nt_monitor
  188     1 DeMeursj S     4980  1.9   1  0.0 nt_monitor
  199   188 DeMeursj S     4980  1.9   1  0.0 nt_monitor
16521   299 DeMeursj D     4144  1.6   1  0.0 TrafficAnalyzer -e
  257     1 DeMeursj S     3644  1.4   0  0.0 sysstate
  263     1 DeMeursj S     3372  1.3   0  0.0 rstats
20783     1 nobody   S     3352  1.3   1  0.0 dnsmasq --log-async
  545   542 DeMeursj S     2980  1.1   0  0.0 u2ec
  542     1 DeMeursj S     2980  1.1   0  0.0 u2ec
  546   545 DeMeursj S     2980  1.1   1  0.0 u2ec
  691   690 DeMeursj S     2836  1.1   1  0.0 wred -B
  690   689 DeMeursj S     2836  1.1   0  0.0 wred -B
 
Dombo said:
sorry... dombo here:
Code: 
Mem: 209032K used, 46644K free, 10200K shrd, 796K buff, 21452K cached
CPU:  0.5% usr  1.1% sys  0.0% nic 48.5% idle 49.0% io  0.0% irq  0.6% sirq
Load average: 5.13 5.14 5.14 2/115 12794
  PID  PPID USER     STAT   VSZ %VSZ CPU %CPU COMMAND
  202     1 DeMeursj R     5140  2.0   1  0.6 nt_center
  179     1 DeMeursj S      652  0.2   0  0.3 tftpd
  295     1 DeMeursj S    11032  4.3   1  0.2 /usr/sbin/lighttpd-monitor
  259     1 DeMeursj S     5328  2.0   0  0.2 watchdog02
  297     1 DeMeursj S     5728  2.2   0  0.1 mastiff
  200   199 DeMeursj S     4980  1.9   0  0.1 nt_monitor
  189     1 DeMeursj S     2604  1.0   0  0.1 protect_srv
12767 12759 DeMeursj R     1428  0.5   1  0.1 top
   36     2 DeMeursj SW       0  0.0   1  0.1 [kworker/1:1]
  634     1 DeMeursj S    14120  5.5   1  0.0 /usr/sbin/lighttpd -f /tmp/lighttpd.conf -D
  254     1 DeMeursj S     6916  2.7   0  0.0 httpd -i br0
  277     1 DeMeursj D     6548  2.5   0  0.0 networkmap --bootwait
  253     1 DeMeursj S     6236  2.4   0  0.0 httpds -s -i br0 -p 8443
  394     1 DeMeursj S     6072  2.3   0  0.0 /usr/sbin/smbd -D -s /etc/smb.conf
  378     1 DeMeursj S     5904  2.3   0  0.0 nmbd -D -s /etc/smb.conf
  414   412 DeMeursj S     5728  2.2   1  0.0 mastiff
  412   297 DeMeursj S     5728  2.2   0  0.0 mastiff
  413   412 DeMeursj S     5728  2.2   0  0.0 mastiff
  379   378 DeMeursj S     5592  2.1   1  0.0 nmbd -D -s /etc/smb.conf
  258     1 DeMeursj S     5392  2.1   1  0.0 watchdog
  197   190 DeMeursj S     5348  2.0   1  0.0 /sbin/netool
  190     1 DeMeursj S     5348  2.0   0  0.0 /sbin/netool
  198   197 DeMeursj S     5348  2.0   0  0.0 /sbin/netool
    1     0 DeMeursj S     5340  2.0   1  0.0 /sbin/preinit
  163     1 DeMeursj S     5332  2.0   0  0.0 /sbin/wanduck
  719     1 DeMeursj S     5328  2.0   1  0.0 bwdpi_wred_alive
  358     1 DeMeursj S     5328  2.0   0  0.0 erp_monitor
  300     1 DeMeursj S     5328  2.0   0  0.0 pctime
  299     1 DeMeursj S     5328  2.0   1  0.0 hour_monitor
  541     1 DeMeursj S     5328  2.0   1  0.0 usbled
  627     1 DeMeursj S     5328  2.0   0  0.0 disk_monitor
  224     1 DeMeursj S     5328  2.0   0  0.0 wpsaide
  298     1 DeMeursj S     5328  2.0   0  0.0 bwdpi_check
   71     1 DeMeursj S     5324  2.0   1  0.0 console
  206   202 DeMeursj S     5140  2.0   0  0.0 nt_center
  207   206 DeMeursj S     5140  2.0   0  0.0 nt_center
  236   199 DeMeursj S     4980  1.9   1  0.0 nt_monitor
  188     1 DeMeursj S     4980  1.9   1  0.0 nt_monitor
  199   188 DeMeursj S     4980  1.9   1  0.0 nt_monitor
16521   299 DeMeursj D     4144  1.6   1  0.0 TrafficAnalyzer -e
  257     1 DeMeursj S     3644  1.4   0  0.0 sysstate
  263     1 DeMeursj S     3372  1.3   0  0.0 rstats
20783     1 nobody   S     3352  1.3   1  0.0 dnsmasq --log-async
  545   542 DeMeursj S     2980  1.1   0  0.0 u2ec
  542     1 DeMeursj S     2980  1.1   0  0.0 u2ec
  546   545 DeMeursj S     2980  1.1   1  0.0 u2ec
  691   690 DeMeursj S     2836  1.1   1  0.0 wred -B
  690   689 DeMeursj S     2836  1.1   0  0.0 wred -B
Click to expand...

That CPU is pegged doing IO. If you have a USB disk plugged in try unplugging.
 
there is no usb in to the router..
That was the last time a problem only now there is no other thing in to
 
Dombo said:
there is no usb in to the router..
That was the last time a problem only now there is no other thing in to
Click to expand...
What other devices do you have connected - what happens if you move them to different ports / change the cables?
 
no other things @ all..
I changed the lan cables i reboot i power off..
in 5 minute the first cpu is @ 100 %
 
In your screen prints above I can see devices on Lan 2 and Lan 4, are these now disconnected? Are you accessing the router via wifi? What happens if you disable 2.4 and connect on 5.0 (and vice versa)?

You could also try enabling dual wan, which will allow you to use a lan port for the wan connection and connect your modem to the secondary port.

Assuming none of the above work, and powering down and rebooting from cold does not work then the possible/ probable causes seem to be

Faulty power supply
hardware fault on the router
hardware fault on the modem.
 
What scripts do you have installed?
 
You must log in or register to reply here.

Similar threads

W
Wired AIMesh causing devices to lose connection, 100% cpu usage when PC disconnects in 388.7+
Replies
2
Views
545
whosucks
W
G
RT-AC87U wifi flaky connections and network problem on reboot.
Replies
3
Views
470
elbubi
E
W
388.8.4 release seem to have cause AIMESH stability issue
2
Replies
25
Views
1K
Tech9
Tech9
N
WiFi issues with latest version 388.8_2 on ASUS RT-AX88U
Replies
7
Views
591
arias
A
Sabelstrom2
Router RT-AX59U uses all my RAM
Replies
4
Views
234
Sabelstrom2
Sabelstrom2
Similar threads
Thread starter Title Forum Replies Date
G RT-AC87U wifi flaky connections and network problem on reboot. Asuswrt-Merlin 3
N nextdns on RT-AC87U Asuswrt-Merlin 2
R How to setup WAN VLAN for Nokia Optical modem on RT-AC87U? Asuswrt-Merlin 12
G Asus RT-AC87U VPN cipher AES-256-GCM Asuswrt-Merlin 10
aru AiMesh Node's CPU usage is relatively high? Asuswrt-Merlin 0
J ASUS GT-AXE16000 CPU usage with VPN on lan machine Asuswrt-Merlin 25
garycnew 100% CPU Utilization by Miniupnpd and Netstat Asuswrt-Merlin 25
W Wired AIMesh causing devices to lose connection, 100% cpu usage when PC disconnects in 388.7+ Asuswrt-Merlin 2
matthew_eli "sw_devled" and "amas_portstatus" processes CPU usage on GT-BE98 Asuswrt-Merlin 1
E Fail over Wan = high cpu use? Asuswrt-Merlin 5

Similar threads

Latest threads

Support SNBForums w/ Amazon

If you'd like to support SNBForums, just use this link and buy anything on Amazon. Thanks!

Sign Up For SNBForums Daily Digest

Get an update of what's new every day delivered to your mailbox. Sign up here!

Members online

Total: 722 (members: 11, guests: 711)
Top