RT-AX57 WIFI goes off

[tiomiguel]

I have RT-AX57 in AP mode. with LED,s off

It is the SECOND time it happens: Monday at 15:30 GMT WIFI goes off and WIFI LED,s turn on. I put image. In settings WIFI is on but wireless log is like this:

Rebooting solves it

¿What issue is this??????
---------------------------------------------------------------------------------------------------------------------------------------------------------------------
Not associated. Last associated with SSID: ""
Mode : AP Only

Stations List
----------------------------------------
idx MAC Associated Authorized RSSI PHY PSM SGI STBC MUBF NSS BW Tx rate Rx rate Connect Time

Not associated. Last associated with SSID: ""
Mode : AP Only

DFS status: state IDLE time elapsed 0ms radar channel cleared by DFS none

Channel Information
----------------------------------------
Channel 36 A Band
Channel 40 A Band
Channel 44 A Band
Channel 48 A Band
Channel 52 A Band, RADAR Sensitive, Passive
Channel 56 A Band, RADAR Sensitive, Passive
Channel 60 A Band, RADAR Sensitive, Passive
Channel 64 A Band, RADAR Sensitive, Passive
Channel 100 A Band, RADAR Sensitive, Passive
Channel 104 A Band, RADAR Sensitive, Passive
Channel 108 A Band, RADAR Sensitive, Passive
Channel 112 A Band, RADAR Sensitive, Passive
Channel 116 A Band, RADAR Sensitive, Passive
Channel 120 A Band, RADAR Sensitive, Passive
Channel 124 A Band, RADAR Sensitive, Passive
Channel 128 A Band, RADAR Sensitive, Passive
Channel 132 A Band, RADAR Sensitive, Passive
Channel 136 A Band, RADAR Sensitive, Passive
Channel 140 A Band, RADAR Sensitive, Passive

Stations List
----------------------------------------
idx MAC Associated Authorized RSSI PHY PSM SGI STBC MUBF NSS BW Tx rate Rx rate Connect Time

---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

I do not know whan can be this

 

[Tech9]

Use non-DFS channels only for this AP and try again. Channels 36-48.

 

[tiomiguel]

I did not use them

 

[tiomiguel]

It is like wifi freezes

 

[Tech9]

Reset it to factory defaults, set it up again, test. If the same thing starts happening again - perhaps hardware issue.

 

[tiomiguel]

Perhaps the two ON LED,s (2,4 Ghz and 5 Ghz) is a error code but what?