Voxel seek help R9000 VOXEL Install qbittorrent

[a07464831]

Qbittorrent cannot be successfully installed by r9000 voxel

You can see qbittorrent in the installed list, but it can't be started!



Configuring qbittorrent.
Collected errors:
* opkg_install_cmd: Cannot install package -.
* opkg_install_cmd: Cannot install package 4.3.1-1.

 

[a07464831]

root@R9000:~$ /opt/bin/opkg  install qbittorrent - 4.3.1-1
Installing qbittorrent (4.3.1-1) to root...
Downloading http://www.voxel-firmware.com/Downloads/Voxel/Entware/Entware-3x-Voxel/qbittorrent_4.3.1-1_cortex-a15-3x.ipk
Unknown package '-'.
Unknown package '4.3.1-1'.
Configuring qbittorrent.
Collected errors:
 * opkg_install_cmd: Cannot install package -.
 * opkg_install_cmd: Cannot install package 4.3.1-1.

 

[R. Gerrits]

the two opkg errors are because you should have used only this command:
/opt/bin/opkg install qbittorrent
(i.e. not the dash and the versionnumber)

but, if I try it on my R7800, then I see that also some additional packages are installed:

root@R7800:~$ /opt/bin/opkg install qbittorrent
Installing qbittorrent (4.3.1-1) to root...
Downloading http://www.voxel-firmware.com/Downloads/Voxel/Entware/Entware-3x-Voxel/qbittorrent_4.3.1-1_cortex-a15-3x.ipk
Installing qt5-core (5.14.2-3) to root...
Downloading http://www.voxel-firmware.com/Downloads/Voxel/Entware/Entware-3x-Voxel/qt5-core_5.14.2-3_cortex-a15-3x.ipk
Installing qt5-network (5.14.2-3) to root...
Downloading http://www.voxel-firmware.com/Downloads/Voxel/Entware/Entware-3x-Voxel/qt5-network_5.14.2-3_cortex-a15-3x.ipk
Installing qt5-xml (5.14.2-3) to root...
Downloading http://www.voxel-firmware.com/Downloads/Voxel/Entware/Entware-3x-Voxel/qt5-xml_5.14.2-3_cortex-a15-3x.ipk
Installing boost-system (1.75.0-2) to root...
Downloading http://www.voxel-firmware.com/Downloads/Voxel/Entware/Entware-3x-Voxel/boost-system_1.75.0-2_cortex-a15-3x.ipk
Installing libtorrent-rasterbar (2.0.1-1) to root...
Downloading http://www.voxel-firmware.com/Downloads/Voxel/Entware/Entware-3x-Voxel/libtorrent-rasterbar_2.0.1-1_cortex-a15-3x.ipk

not sure why yours doesn't show them.

Perhaps your entware was outdated? (try /opt/bin/opkg update && /opt/bin/opkg upgrade)

 

[a07464831]

1. Thank you very much. Your reply is very moving!



2. According to your instructions, I installed it successfully, but there was a problem. I couldn't start it automatically. I can run it manually. / qbittorrent! How can I solve it?

root@R9000:~$ cd ../opt/etc/init.d
root@R9000:/opt/etc/init.d$ ls
S89qbittorrent  rc.func         rc.unslung

2. There is another question. I can find (bin, usr, share, VaR, etc.) according to the document tutorial setup of entware "LS – L / opt / *", and it will automatically run entware from HDD when it starts. Can I detect whether I have successfully installed entware to HDD?

root@R9000:/tmp/mnt/sda2$ ls –l /opt/*
ls: –l: No such file or directory
/opt/dirlist   /opt/filelist  /opt/version

/opt/bin:
...
...
...

 

[R. Gerrits]

2.) what do you mean with run manually vs automatically?

if you run /opt/etc/init.d/S89qbittorrent start then it does start.
But if you reboot the router, it doesn't?

3.) strange that you get a warning about no such file or directory.
Did you perhaps copy / paste the command from somewhere? (i'm guessing the "minus" (or hyphen) in front of l in that document is not really a minus, but some fancy dash.)

I don't think you can easily verify that entware is installed correctly. (I mean, if the extraction failed half way, then you still might have all of the top-level folders, but could still be missing a few critical components.

But, you could check /mnt/optware/autorun/scripts/post-mount.sh, to see if it has the logic to mount /opt (or mount the entware folder into /opt) and whether it has the line /opt/etc/init.d/rc.unslung start

 

[a07464831]

Thank you for your reply. Yes, I restart the router. It won't start itself. Every time I restart it, I need to run it manually.