[Solved] RT-AC68U: 384.10_2 very slow speeds

[Shira]

There is something wrong with the latest fw, my speeds are very slow since the update. Out of 600/600 Mbit fiber I'm getting around 180-200. I tried to reinstall the previous and latest fws back and forth a few times to make sure, with the previous version my speed is fine around 500-600.

 

[L&LD]

There is something wrong with the latest fw, my speeds are very slow since the update. Out of 600/600 Mbit fiber I'm getting around 180-200. I tried to reinstall the previous and latest fws back and forth a few times to make sure, with the previous version my speed is fine around 500-600.

No, nothing wrong. The forums would be alight by the chaos that would have caused.

I would recommend flashing the firmware you want (recommend 384.10_2) and then doing a full reset to factory defaults and follow that by a minimal and manual configuration of the router to secure it and connect to your ISP.

Please see my signature below for the links and further details on how to get your router to a good/known state.

 

[GuruGuy]

There is something wrong with the latest fw, my speeds are very slow since the update. Out of 600/600 Mbit fiber I'm getting around 180-200. I tried to reinstall the previous and latest fws back and forth a few times to make sure, with the previous version my speed is fine around 500-600.

Same thread here: https://www.snbforums.com/threads/s...ware-update-384-10_2.55982/page-2#post-480509

 

[Shira]

You are right, after a factory reset it works fine again. Turns out Hardware Acceleration was not working with the update and my "old" settings. Thanks.