Menu
What's new
By:
Filters Better Search

SSH command to find the number of streams on 2.4GHz on AiMesh Nodes?

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

L

LimJK

Very Senior Member
Hi,
Is there some SSH command to find the number of streams on my RT-AC86U AiMesh Nodes 2.4GHz Band? Thank you.

Reason: Over the last few months I discovered that the 2.4GHz band on both RT-AC86U AiMesh Nodes takes turn to degrades from the usual 3 streams to 1 stream. I usually use WiFi Explorer (on Mac) to discover the degradation and do my usual work around by physical reboot of the offending AiMesh Node, or Remove and Re-Add AiMesh node from AiMesh GUI. However, if I am not at home I would like to find out if the degradation has happened. This happened in the last few releases of the 386 Firmwares on both Stock and Merlin.

Edit: https://www.snbforums.com/threads/asuswrt-merlin-386-2-beta-is-now-available.71038/post-677846
 
on my RT-AX88U with lyra node with fw 9.0.0.4.386_41615-g7c2264e i can login to the node and type

2.4
Code: 
wlanconfig ath0 list sta

5ghz
Code: 
wlanconfig ath1 list sta

1618125158177.png


more commands:

get interfaces
Code: 
nvram get wl_ifnames


wifi network summary:
Code: 
iwconfig ath0

iwconfig ath1

on the RT-AX88U i have the "wl" command, which is sadly not present on the lyra nodes.
There you can grep all infos about a connected wifi client

like this
Code: 
 wl -i eth6 sta_info DC:A6:32:A7:42:30


1618125829377.png


you can sneak into my old code if you need some kind of script
 
The commands are platform-specific. Something that works for Lyra's QCA will not work for Broadcom-based routers.
 
corgan2224 said:
on my RT-AX88U with lyra node with fw 9.0.0.4.386_41615-g7c2264e i can login to the node and type

2.4
Code: 
wlanconfig ath0 list sta

5ghz
Code: 
wlanconfig ath1 list sta

View attachment 33045

more commands:

get interfaces
Code: 
nvram get wl_ifnames


wifi network summary:
Code: 
iwconfig ath0

iwconfig ath1

on the RT-AX88U i have the "wl" command, which is sadly not present on the lyra nodes.
There you can grep all infos about a connected wifi client

like this
Code: 
 wl -i eth6 sta_info DC:A6:32:A7:42:30


View attachment 33046

you can sneak into my old code if you need some kind of script
Click to expand...
corgan2224,

Thanks for the details, unfortunately the commands does not seem work for my macOS environment:

For AiMesh Router RT-AX88U where 2.4GHz interface is eth6
Code: 
wl -i eth6 sta_info <MAC Addr for 2.4GHz Interface>
or
wl sta_info <MAC Addr for 2.4GHz Interface>
For AiMesh Nodes RT-AX86U where 2.4GHz interface is eth5
Code: 
wl -i eth5 sta_info <MAC Addr for 2.4GHz Interface>
or
wl sta_info <MAC Addr for 2.4GHz Interface>
All returned -> wl: Bad Address
I confirmed that my respective <MAC Addr for 2.4GHz Interfaces> are correct; I even tried both lower and upper cases.

Can someone else on macOS environment, please help validate / confirm it is a macOS feature / issue, or I have missed something, Any suggestions of possible workarounds would be appreciated. Thanks!

EDIT: PS: I just like to add that "wl -i eth6 phy_tempsense" and "wl -i eth5 phy_tempsense" actually work on my AiMesh Router RT-AX88U and AiMesh Node RT-AC86U respectively.
 
Last edited:
The host environment doesn't matter, because you have to ssh login to your device and type the commands on your device.

On the router you can type
Code: 
nvram get wl_ifnames
to get the wifi interfaces of your device

on the lyra you can type
Code: 
iwconfig

There you can see your wifi interface names.

But as @RMerlin mentioned, the commands you can use depands on the router/node model. I can only tell you about my RT-AX88u and a lyra node.
 
LimJK said:
All returned -> wl: Bad Address
Click to expand...
That's because you're trying to use the MAC address of the AP when you should be using the MAC address of one on the clients (STA). Although I don't think any of these commands show the number of streams.
Code: 
# wl -i eth2 assoclist
assoclist EC:1F:72:F8:4A:21
assoclist DC:53:60:84:45:6D
assoclist D4:38:9C:BA:DC:30
assoclist D4:11:A3:C3:05:25
assoclist 64:6E:69:2B:C8:0D

# wl -i eth2 sta_info EC:1F:72:F8:4A:21
STA EC:1F:72:F8:4A:21:
         aid:5
         rateset [ 6 9 12 18 24 36 48 54 ]
         idle 1 seconds
         in network 1102 seconds
         state: AUTHENTICATED ASSOCIATED AUTHORIZED
         flags 0x11e13b: BRCM WME PS N_CAP VHT_CAP AMPDU AMSDU
         HT caps 0x6f: LDPC 40MHz SGI20 SGI40
         VHT caps 0x63: LDPC SGI80 SU-BFR SU-BFE
         tx data pkts: 425469
         tx data bytes: 98052954
         tx ucast pkts: 2505
         tx ucast bytes: 1662972
         tx mcast/bcast pkts: 422964
         tx mcast/bcast bytes: 96389982
         tx failures: 0
         rx data pkts: 2570
         rx data bytes: 543583
         rx ucast pkts: 2497
         rx ucast bytes: 535604
         rx mcast/bcast pkts: 73
         rx mcast/bcast bytes: 7979
         rate of last tx pkt: 6000 kbps
         rate of last rx pkt: 24000 kbps
         rx decrypt succeeds: 2127
         rx decrypt failures: 0
         tx data pkts retried: 30
         tx data pkts retry exhausted: 0
         per antenna rssi of last rx data frame: -43 -41 -45 0
         per antenna average rssi of rx data frames: -43 -42 -44 0
         per antenna noise floor: -96 -100 -97 0
 
Last edited:
ColinTaylor said:
That's because you're trying to use the MAC address of the AP when you should be using the MAC address of one on the clients (STA). Although I don't think any of these commands show the number of streams.
Code: 
# wl -i eth2 assoclist
assoclist EC:1F:72:F8:4A:21
assoclist DC:53:60:84:45:6D
assoclist D4:38:9C:BA:DC:30
assoclist D4:11:A3:C3:05:25
assoclist 64:6E:69:2B:C8:0D

# wl -i eth2 sta_info EC:1F:72:F8:4A:21
STA EC:1F:72:F8:4A:21:
         aid:5
         rateset [ 6 9 12 18 24 36 48 54 ]
         idle 1 seconds
         in network 1102 seconds
         state: AUTHENTICATED ASSOCIATED AUTHORIZED
         flags 0x11e13b: BRCM WME PS N_CAP VHT_CAP AMPDU AMSDU
         HT caps 0x6f: LDPC 40MHz SGI20 SGI40
         VHT caps 0x63: LDPC SGI80 SU-BFR SU-BFE
         tx data pkts: 425469
         tx data bytes: 98052954
         tx ucast pkts: 2505
         tx ucast bytes: 1662972
         tx mcast/bcast pkts: 422964
         tx mcast/bcast bytes: 96389982
         tx failures: 0
         rx data pkts: 2570
         rx data bytes: 543583
         rx ucast pkts: 2497
         rx ucast bytes: 535604
         rx mcast/bcast pkts: 73
         rx mcast/bcast bytes: 7979
         rate of last tx pkt: 6000 kbps
         rate of last rx pkt: 24000 kbps
         rx decrypt succeeds: 2127
         rx decrypt failures: 0
         tx data pkts retried: 30
         tx data pkts retry exhausted: 0
         per antenna rssi of last rx data frame: -43 -41 -45 0
         per antenna average rssi of rx data frames: -43 -42 -44 0
         per antenna noise floor: -96 -100 -97 0
Click to expand...
ColinTaylor,
Yes, I am looking for the number of streams for my 2.4GHz interface of my RT-AC86U AiMesh Node, is there some other ways to find out over SSH Command. Currently I am using WiFi Explorer App on my MacBookPro that shows me the number of streams from ALL AiMesh Router / Nodes of both 2.4GHz and 5GHz Interfaces, it works only when I am in my HomeNetwork.
Thank you so much for educating and pointing me to the "assoclist" that shows me the STA that is associated to the interface eth5 (2.4GHz) & eth6 (5GHz) for the command to work.

corgan2224,
Thanks for pointing me to this SSH wl Command, EDIT: by the way it works on RT-AC86u just like on RT-AX88u (HND models)
 
Last edited:
I would like to use the home assisstant Command_line_ sensor to notify me when there's an update available for my RT-AC2900. I've SSH already enabled for some other purposeswith HASS.
But annyone anny idea how to find this "new update" flag in the router?
 
Rockel83 said:
I would like to use the home assisstant Command_line_ sensor to notify me when there's an update available for my RT-AC2900. I've SSH already enabled for some other purposeswith HASS.
But annyone anny idea how to find this "new update" flag in the router?
Click to expand...
I don't see how your question is related to the subject of this thread (detecting the number of WiFi streams of an AiMesh node). Probably best to start a new thread for your particular question.
 
@LimJK , was the command now working? Did you see the streams when you do an ssh to the node?

I also have ac86 u as nodes, and speed Aldo drops after days/weeks ... I want to identify this somehow
 
Pergola Fabio said:
@LimJK , was the command now working? Did you see the streams when you do an ssh to the node?

I also have ac86 u as nodes, and speed Aldo drops after days/weeks ... I want to identify this somehow
Click to expand...
Pergola,
This is a 10 month old thread, Sorry, I have not figured a way to do it via SSH for Stream information 2.4GHz and 5GHz band for my AiMesh Router and Nodes. I am happy using WiFi Explorer on my MacBookPro as per my first post. Sorry.
 
Pergola Fabio said:
Ok, np

Do you know by any chance a windows app that can display streams?
Click to expand...
I have not use Windows for ages, not sure inSSIDer provides streams information.

Edit: Fingers of retiree a bit slow on keyboard, see Colin Taylor's post above:)
 
Last edited:
You must log in or register to reply here.

Similar threads

F
VLANs on AIMesh nodes, is this feasible today?
Replies
4
Views
890
fulvion75
F
A
Found a way to make AImesh nodes to have different channels!
2
Replies
31
Views
4K
Tech9
Tech9
Smokindog
Might be ready to give AiMesh another look
Replies
8
Views
978
Tech9
Tech9
T
AiMesh Nodes take SSID of 5G-1 but channel of 5G-2 (1x AXE-16000/5x AX-3000's)
Replies
8
Views
1K
thewifiatemyhomework
T
C
Ability to view negotiated NIC speeds on LAN ports of AIMesh Nodes?
Replies
3
Views
531
OzarkEdge
OzarkEdge
Similar threads
Thread starter Title Forum Replies Date
M AC86U - SSH Disabled few seconds after boot - 386.14. Asuswrt-Merlin 0
A RT-AX88U - 3004.388.8_2 - SSH connection closed after few minutes from reboot Asuswrt-Merlin 10
CntrlAltDel Switch WAN type from SSH Asuswrt-Merlin 3
W Question: About AX4200 regarding SSH support and Entware Asuswrt-Merlin 23
S restart web server from SSH Asuswrt-Merlin 13
K Toggle VPN Director rules for WireGuard via SSH Asuswrt-Merlin 2
M ssh access with DNS name takes a long time where it did not used to Asuswrt-Merlin 0
William Higgs Ssh to router logging in as wrong user? Asuswrt-Merlin 3
S Route add via SSH - persistent-how? Asuswrt-Merlin 4
G RESOLVED: Lost access to WebUI from LAN, SSH is working Asuswrt-Merlin 1

Similar threads

Latest threads

Support SNBForums w/ Amazon

If you'd like to support SNBForums, just use this link and buy anything on Amazon. Thanks!

Sign Up For SNBForums Daily Digest

Get an update of what's new every day delivered to your mailbox. Sign up here!

Members online

Total: 753 (members: 10, guests: 743)
Top