Menu
What's new
By:
Filters Better Search

Wireguard Standalone wg-quick alternative (no Entware/USB Drive required)

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

What do get for output when you run the firewall script and nat-start script directly?

Also, you need to enable scripts on the admin page of the GUI.
 
Jeffrey Young said:
What do get for output when you run the firewall script and nat-start script directly?

Also, you need to enable scripts on the admin page of the GUI
Click to expand...

Scripts are allowed through admin page.

Code: 
Nickolau@RT-AC86U-7210:/jffs/scripts# nano firewall-start
Nickolau@RT-AC86U-7210:/jffs/scripts# ./firewall-start
Script called to add firewall rules for all wireguard instances
Deleting firewall rules
Adding firewall rules
Nickolau@RT-AC86U-7210:/jffs/scripts# nano nat-start
Nickolau@RT-AC86U-7210:/jffs/scripts# ./nat-start
Script called to add NAT iptables rules for all wireguard interfaces
Deleting NAT Rules
Adding NAT Rules
Nickolau@RT-AC86U-7210:/jffs/scripts# ./nat-start show
Script called to add NAT iptables rules for all wireguard interfaces
Deleting NAT Rules
Adding NAT Rules
Nickolau@RT-AC86U-7210:/jffs/scripts# ./firewall-start show
Script called to add firewall rules for all wireguard instances
Deleting firewall rules
Adding firewall rules
Nickolau@RT-AC86U-7210:/jffs/scripts#
 
can you post the output of wg show interfaces
 
Can you rename your config file so that the - is not there and try again. I am thinking the parser is getting messed up with the hyphen for the firewall and nat restart.
 
did it.

not working.

Output:

Code: 
Nickolau@RT-AC86U-7210:/tmp/home/root# /jffs/addons/wireguard/wg-tool.sh restart brsao show
[#] ip -4 rule delete table 51820
[#] ip rule delete table main suppress_prefixlength 0
[#] ip link del dev brsao
Wireguard interface brsao successfully deleted
Deleting firewall rules
Deleting NAT Rules
[#] ip link add dev brsao type wireguard
[#] ip -4 address add dev brsao  10.14.0.2/16
[#] ip link set up dev brsao
[#] ip link set mtu 1420 up dev brsao
[#] ip -4 route add 0.0.0.0/0 dev brsao table 51820
[#] ip -4 rule add not fwmark 51820 table 51820
[#] ip -4 rule add table main suppress_prefixlength 0
Wireguard interface brsao successfully added
Adding firewall rules
[#] iptables -I INPUT -i brsao -j ACCEPT
[#] iptables -I FORWARD -i brsao -j ACCEPT
[#] iptables -I FORWARD -o brsao -j ACCEPT
[#] iptables -I OUTPUT -o brsao -j ACCEPT
Adding NAT Rules
[#] iptables -t mangle -I FORWARD -o brsao -p tcp -m tcp --tcp-flags SYN,RST SYN -j TCPMSS --clamp-mss-to-pmtu
[#] iptables -t mangle -I FORWARD -i brsao -p tcp -m tcp --tcp-flags SYN,RST SYN -j TCPMSS --clamp-mss-to-pmtu
[#] iptables -t mangle -I FORWARD -o brsao -j MARK --set-xmark 0x01/0x7
[#] iptables -t mangle -I PREROUTING -i brsao -j MARK --set-xmark 0x01/0x7
[#] iptables -t nat -I POSTROUTING -s 10.0.0.0/24 -o brsao -j MASQUERADE
[#] iptables -t nat -N DNSbrsao
[#] iptables -t nat -I PREROUTING -p tcp -m tcp --dport 53 -j DNSbrsao
[#] iptables -t nat -I PREROUTING -p udp -m udp --dport 53 -j DNSbrsao
[#] iptables -t nat -I OUTPUT -o brsao -p tcp -m tcp --dport 53 -j DNSbrsao
[#] iptables -t nat -I OUTPUT -o brsao -p udp -m udp --dport 53 -j DNSbrsao
[#] iptables -t nat -I DNSbrsao -p tcp -s 10.0.0.0/24 -j DNAT --to-destination 162.252.172.57:53
[#] iptables -t nat -I DNSbrsao -p udp -s 10.0.0.0/24 -j DNAT --to-destination 162.252.172.57:53
[#] iptables -t nat -I DNSbrsao -p tcp -s 10.0.0.0/24 -j DNAT --to-destination 149.154.159.92:53
[#] iptables -t nat -I DNSbrsao -p udp -s 10.0.0.0/24 -j DNAT --to-destination 149.154.159.92:53
[#] iptables -t mangle -A PREROUTING -p udp -j CONNMARK --restore-mark --nfmask 0xffffffff --ctmask 0xffffffff
[#] iptables -t mangle -A POSTROUTING -p udp -m mark --mark 0xca6c -j CONNMARK --save-mark --nfmask 0xffffffff --ctmask 0xffffffff
[#] iptables -t raw -A PREROUTING -d 10.14.0.2/16 ! -i brsao -m addrtype ! --src-type LOCAL -j DROP
Nickolau@RT-AC86U-7210:/tmp/home/root#

when i comment the services-start line that calls the script and manually call it, it works fine:
Code: 
Connection to 10.0.0.1 closed.
nickolaubr@MacBook-Air ~ % ssh Nickolau@10.0.0.1
Nickolau@10.0.0.1's password:


ASUSWRT-Merlin RT-AC86U 386.11_0 Sun May 14 16:48:03 UTC 2023
Nickolau@RT-AC86U-7210:/tmp/home/root# cd /jffs/addons/wireguard/
Nickolau@RT-AC86U-7210:/jffs/addons/wireguard#
Nickolau@RT-AC86U-7210:/jffs/addons/wireguard# ./wg-tool.sh restart brsao show
[#] ip -4 rule delete table 51820
[#] ip rule delete table main suppress_prefixlength 0
[#] ip link del dev brsao
Wireguard interface brsao successfully deleted
Deleting firewall rules
Deleting NAT Rules
[#] ip link add dev brsao type wireguard
[#] ip -4 address add dev brsao  10.14.0.2/16
[#] ip link set up dev brsao
[#] ip link set mtu 1420 up dev brsao
[#] ip -4 route add 0.0.0.0/0 dev brsao table 51820
[#] ip -4 rule add not fwmark 51820 table 51820
[#] ip -4 rule add table main suppress_prefixlength 0
Wireguard interface brsao successfully added
Adding firewall rules
[#] iptables -I INPUT -i brsao -j ACCEPT
[#] iptables -I FORWARD -i brsao -j ACCEPT
[#] iptables -I FORWARD -o brsao -j ACCEPT
[#] iptables -I OUTPUT -o brsao -j ACCEPT
Adding NAT Rules
[#] iptables -t mangle -I FORWARD -o brsao -p tcp -m tcp --tcp-flags SYN,RST SYN -j TCPMSS --clamp-mss-to-pmtu
[#] iptables -t mangle -I FORWARD -i brsao -p tcp -m tcp --tcp-flags SYN,RST SYN -j TCPMSS --clamp-mss-to-pmtu
[#] iptables -t mangle -I FORWARD -o brsao -j MARK --set-xmark 0x01/0x7
[#] iptables -t mangle -I PREROUTING -i brsao -j MARK --set-xmark 0x01/0x7
[#] iptables -t nat -I POSTROUTING -s 10.0.0.0/24 -o brsao -j MASQUERADE
[#] iptables -t nat -N DNSbrsao
[#] iptables -t nat -I PREROUTING -p tcp -m tcp --dport 53 -j DNSbrsao
[#] iptables -t nat -I PREROUTING -p udp -m udp --dport 53 -j DNSbrsao
[#] iptables -t nat -I OUTPUT -o brsao -p tcp -m tcp --dport 53 -j DNSbrsao
[#] iptables -t nat -I OUTPUT -o brsao -p udp -m udp --dport 53 -j DNSbrsao
[#] iptables -t nat -I DNSbrsao -p tcp -s 10.0.0.0/24 -j DNAT --to-destination 162.252.172.57:53
[#] iptables -t nat -I DNSbrsao -p udp -s 10.0.0.0/24 -j DNAT --to-destination 162.252.172.57:53
[#] iptables -t nat -I DNSbrsao -p tcp -s 10.0.0.0/24 -j DNAT --to-destination 149.154.159.92:53
[#] iptables -t nat -I DNSbrsao -p udp -s 10.0.0.0/24 -j DNAT --to-destination 149.154.159.92:53
[#] iptables -t mangle -A PREROUTING -p udp -j CONNMARK --restore-mark --nfmask 0xffffffff --ctmask 0xffffffff
[#] iptables -t mangle -A POSTROUTING -p udp -m mark --mark 0xca6c -j CONNMARK --save-mark --nfmask 0xffffffff --ctmask 0xffffffff
[#] iptables -t raw -A PREROUTING -d 10.14.0.2/16 ! -i brsao -m addrtype ! --src-type LOCAL -j DROP
Nickolau@RT-AC86U-7210:/jffs/addons/wireguard#
 
Last edited:
Ok. I am turning in for the night, but this is a client right? If so, it dawned on me that I helped another person with the same issue and the fix was to call the tool from the wan-event script with a delay.

Remove the call to the tool in the services-start script, and create a wan-event script and put in;

Code: 
#!/bin/sh

if [ "$2" = "connected" ]; then
    sleep 10
    /path/to/wg-tool.sh start brsao
fi

Don't forget to make the fix executable.
 
Jeffrey Young said:
Ok. I am turning in for the night, but this is a client right? If so, it dawned on me that I helped another person with the same issue and the fix was to call the tool from the wan-event script with a delay.

Remove the call to the tool in the services-start script, and create a wan-event script and put in;

Code: 
#!/bin/sh

if [ "$2" = "connected" ]; then
    sleep 10
    /path/to/wg-tool.sh start brsao
fi

Don't forget to make the fix executable.
Click to expand...
Hmm I remember reading it somewhere... Will give a try.
Thanks and have a good one!


Edit:

It worked fine!
👏 👏 👏 👏 👏 👏 👏
Thank you!
 
Last edited:
NickolauBr said:
Hmm I remember reading it somewhere... Will give a try.
Thanks and have a good one!


Edit:

It worked fine!
👏 👏 👏 👏 👏 👏 👏
Thank you!
Click to expand...
Perfect. You should probably change start to restart so that the interface gets restarted if the WAN goes down for any reason.
 
You must log in or register to reply here.

Similar threads

J
YazFi Can't make Yazfi working with Wireguard
Replies
13
Views
477
Jacky0611
J
unclebuk
Wireguard VPN Director for VPN - WireGuard® Manager© v1.04 by Martineau
Replies
3
Views
388
unclebuk
unclebuk
S
Wireguard Wireguard Client Help
4 5 6
Replies
119
Views
4K
sammyano
S
S
Wireguard VPN change routes ip
Replies
0
Views
706
S75
S
vlord
gnMerlin - Guest Network Isolation
Replies
4
Views
1K
tnkrer
T

Latest threads

Support SNBForums w/ Amazon

If you'd like to support SNBForums, just use this link and buy anything on Amazon. Thanks!

Sign Up For SNBForums Daily Digest

Get an update of what's new every day delivered to your mailbox. Sign up here!

Members online

Total: 742 (members: 29, guests: 713)
Top