Wireguard support to Voxel FW?

[Voxel]

Voxel's implementation of Wireguard. And it exceeds all expectations.

Yes it is fast. Orbi too BTW.

Voxel.

 

[kamoj]

I just released first add-on beta with wireguard (Requires Voxel firmware):
https://www.snbforums.com/threads/kamoj-add-on-5-1-beta-testing-poll.62315/page-5#post-574407

 

[KW.]

I tried Kamojs addon and with Wireguard. It works very good I get very fast internet speed.

 

[jrbmw]

I tried Kamojs addon and with Wireguard. It works very good I get very fast internet speed.

Is that on the r900 or r7800
Ive installed wireguard tools to root on r7800.Also Theres no place to put user name or password in the gui.
I get this from log.
39.0.0.0/8 dev br0 scope link
2020-04-24 09:03:08 [OpenVPN] WireGuard Client 17468: 69553.27:Information: Stop: Check that wireguard is running
2020-04-24 09:03:08 [OpenVPN] WireGuard Client 17468: 69553.32:Warning: Stop: wireguard not running and wg0 not found. EXIT
WireGuard client is not enabled in nvram. Exit.
WireGuard client is not enabled in nvram. Exit.
How do I activate ?

 

[kamoj]

Wireguard doesn't use user name and password, so no place to fill in.
Instructions are in the readme file for the beta test version.

 

[Voxel]

WireGuard client is not enabled in nvram. Exit.

Check this post (very first):

https://www.snbforums.com/threads/custom-firmware-build-for-r9000-r8900-v-1-0-4-38hf.61402/

4. Enter by telnet to your router and set the nvram variable wg-client to 1

nvram set wg-client=1
nvram commit

Voxel.

 

[kamoj]

If you follow the add-on instruction it will work automatically.
If you install Wireguard manually after kamoj add-on, it will e.g. corrupt/overwrite the wg-client from the add-on, and the GUI etc will not work.
So please follow Voxel instruction without add-on, or Kamoj instruction with add-on.

In any case, it's good to read instructions and readme files.

 

[KW.]

Sorry for leaving out that information I am using R9000

Is that on the r900 or r7800
Ive installed wireguard tools to root on r7800.Also Theres no place to put user name or password in the gui.
I get this from log.
39.0.0.0/8 dev br0 scope link
2020-04-24 09:03:08 [OpenVPN] WireGuard Client 17468: 69553.27:Information: Stop: Check that wireguard is running
2020-04-24 09:03:08 [OpenVPN] WireGuard Client 17468: 69553.32:Warning: Stop: wireguard not running and wg0 not found. EXIT
WireGuard client is not enabled in nvram. Exit.
WireGuard client is not enabled in nvram. Exit.
How do I activate ?

 

[jrbmw]

Wireguard doesn't use user name and password, so no place to fill in.
Instructions are in the readme file for the beta test version.

Apologies Kamoj.... and that will teach me to read ALL the readme file.Had to uninstall and reinstall your addon... all loaded ok ,but it seems pia dont support wireguard on routers yet.

 

[kamoj]

Thank you for reporting back again!
Strange, but you should be able to use a generated config file for windows or android or Linux etc.
Just paste the contents into the add-on GUI filed in Create/Edit an WireGuard Client Configuration manually.
The wg-client extracts and converts the configurationso it suits Voxels wireguard-go !
So try to create a config for nonm-router and try again!!! - And report back!

Apologies Kamoj.... and that will teach me to read ALL the readme file.Had to uninstall and reinstall your addon... all loaded ok ,but it seems pia dont support wireguard on routers yet.

 

[jrbmw]

This is what I get but not connected to internet. Had to reboot

2020-04-24 22:24:11 [OpenVPN] WireGuard Client 5467: 17851.05:=============================================================
2020-04-24 22:24:11 [OpenVPN] WireGuard Client 5467: 17851.06:Information: Check that WireGuard Client is installed
2020-04-24 22:24:11 [OpenVPN] WireGuard Client 5467: 17851.08:Information: Check that WireGuard Client is enabled
2020-04-24 22:24:11 [OpenVPN] WireGuard Client 5467: 17851.09:Information: Check that a configuration file is given and exist
2020-04-24 22:24:11 [OpenVPN] WireGuard Client 5467: 17851.10:Information: Check if not router mode
2020-04-24 22:24:11 [OpenVPN] WireGuard Client 5467: 17851.11:Information: Check that the Netgear OpenVPN Client is not enabled
2020-04-24 22:24:11 [OpenVPN] WireGuard Client 5467: 17851.13:Information: Check that an OpenVPN Client is not running
2020-04-24 22:24:11 [OpenVPN] WireGuard Client 5467: 17851.16:Information: Save default route to restore in case of wg crashes
2020-04-24 22:24:11 [OpenVPN] WireGuard Client 5467: 17851.18:Information: ip route before starting wireguard
2020-04-24 22:24:11 [OpenVPN] WireGuard Client 5467: 17851.21:default via 172.16.10.217 dev ppp0
172.16.10.217 dev ppp0 proto kernel scope link src 195.213.35.78
192.168.1.0/24 dev br0 proto kernel scope link src 192.168.1.1
239.0.0.0/8 dev br0 scope link
2020-04-24 22:24:11 [OpenVPN] WireGuard Client 5467: 17851.22:Information: Check if wireguard is already running, and stop it if so
2020-04-24 22:24:11 [OpenVPN] WireGuard Client 5467: 17851.25:Information: Check if wg0 interface is already available, and stop it if so
2020-04-24 22:24:12 [OpenVPN] WireGuard Client 5467: 17852.41:Information: Check that all needed data exist in the configuration
2020-04-24 22:24:13 [OpenVPN] WireGuard Client 5467: 17852.76:Information: Check that DNS service is working
2020-04-24 22:24:13 [OpenVPN] WireGuard Client 5467: 17852.87:Information: DNS service is working
2020-04-24 22:24:13 [OpenVPN] WireGuard Client 5467: 17852.88:Information: Starting WireGuard client. Please wait.
2020-04-24 22:24:13 [OpenVPN] WireGuard Client 5467: 17852.89:Information: IP of EndPoint myserver.dyndns.org is 2.49.147.209.
2020-04-24 22:24:13 [OpenVPN] WireGuard Client 5467: 17852.90:Information: Start the program / Add a new interface
2020-04-24 22:24:13 [OpenVPN] WireGuard Client 5467: 17852.93:Information: Assign an IP address and peer
2020-04-24 22:24:13 [OpenVPN] WireGuard Client 5467: 17852.94:Information: Configure the interface
2020-04-24 22:24:13 [OpenVPN] WireGuard Client 5467: 17852.95:Information: Set config file for wg0 interface
2020-04-24 22:24:13 [OpenVPN] WireGuard Client 5467: 17852.99:Information: Activate the interface
2020-04-24 22:24:13 [OpenVPN] WireGuard Client 5467: 17853.00:Information: Check that the wg0 interface is available
2020-04-24 22:24:13 [OpenVPN] WireGuard Client 5467: 17853.01:Information: Overriding The Default Route
2020-04-24 22:24:13 [OpenVPN] WireGuard Client 5467: 17853.04:Information: Delete the default route
2020-04-24 22:24:13 [OpenVPN] WireGuard Client 5467: 17853.06:Information: Restart firewall to apply iptables rules for WireGuard client.
2020-04-24 22:24:13 [OpenVPN] WireGuard Client 5467: 17853.11:Generating Rules...
Done!
2020-04-24 22:24:15 [OpenVPN] WireGuard Client 5467: 17854.62:Starting Firewall...
Done!
2020-04-24 22:24:15 [OpenVPN] WireGuard Client 5467: 17854.63:Information: Optimize network settings
2020-04-24 22:24:15 [OpenVPN] WireGuard Client 5467: 17854.65:Information: Show processes
2020-04-24 22:24:15 [OpenVPN] WireGuard Client 5467: 17854.68: 5284 root 1064 S /bin/sh /www/cgi-bin/kamoj.sh addon_wg_client=kamoj&raw_reply=1&wg_server=client_1.conf&wg_start=1
5468 root 1036 S /bin/sh /www/cgi-bin/kamoj.sh addon_wg_client=kamoj&raw_reply=1&wg_server=client_1.conf&wg_start=1
6024 root 3288 S < wireguard-go wg0
2020-04-24 22:24:15 [OpenVPN] WireGuard Client 5467: 17854.69:Information: Show Wireguard status
2020-04-24 22:24:15 [OpenVPN] WireGuard Client 5467: 17854.71:interface: wg0
public key: ejlXLQQFcH1qU5lpNfJ0inwUpvT/BXxzhBloNLiyIRk=
private key: (hidden)
listening port: 45917
peer: hA8R55jbCj2EhbAAXEaRKFqsnjpixUwKauFUTBCBeC4=
endpoint: 2.49.147.209:51820
allowed ips: 0.0.0.0/0
transfer: 0 B received, 148 B sent
2020-04-24 22:24:15 [OpenVPN] WireGuard Client 5467: 17854.71:Information: ip route after starting wireguard
2020-04-24 22:24:15 [OpenVPN] WireGuard Client 5467: 17854.73:0.0.0.0/1 dev wg0 scope link
2.49.147.209 via 172.16.10.217 dev ppp0
10.0.0.0/24 dev wg0 proto kernel scope link src 10.0.0.2
128.0.0.0/1 dev wg0 scope link
172.16.10.217 dev ppp0 proto kernel scope link src 195.213.35.78
192.168.1.0/24 dev br0 proto kernel scope link src 192.168.1.1
239.0.0.0/8 dev br0 scope link
2020-04-24 22:24:15 [OpenVPN] WireGuard Client 5467: 17854.74:Information: Show ping time and to see if DNS is working
2020-04-24 22:24:45 [OpenVPN] WireGuard Client 5467: 17884.78:
2020-04-24 22:24:45 [OpenVPN] WireGuard Client 5467: 17884.79:Information: Wireguard Client completed start sequence
2020-04-24 22:24:45 [OpenVPN] WireGuard Client 5467: 17884.80:=============================================================

 

[kamoj]

@jrbmw
Try this:
Logon to the router and run from command line:

sed -i 's/IP\.\"/IP\.\" \&\& sleep 25/g' /etc/init.d/wg-client

Then reboot.
Any change?

 

[jrbmw]

@jrbmw
Try this:
Logon to the router and run from command line:

sed -i 's/IP\.\"/IP\.\" \&\& sleep 25/g' /etc/init.d/wg-client

Then reboot.
Any change?

No change,no internet but didnt have to reboot just turned wireguard off.
I put the config files on the usb , client 1, 2 and 3 and server cofig


2020-04-25 07:42:15 [OpenVPN] WireGuard Client 25624: 228.53:=============================================================
2020-04-25 07:42:15 [OpenVPN] WireGuard Client 25624: 228.54:Information: Check that WireGuard Client is installed
2020-04-25 07:42:15 [OpenVPN] WireGuard Client 25624: 228.56:Information: Check that WireGuard Client is enabled
2020-04-25 07:42:15 [OpenVPN] WireGuard Client 25624: 228.57:Information: Check that a configuration file is given and exist
2020-04-25 07:42:15 [OpenVPN] WireGuard Client 25624: 228.59:Information: Check if not router mode
2020-04-25 07:42:15 [OpenVPN] WireGuard Client 25624: 228.60:Information: Check that the Netgear OpenVPN Client is not enabled
2020-04-25 07:42:15 [OpenVPN] WireGuard Client 25624: 228.61:Information: Check that an OpenVPN Client is not running
2020-04-25 07:42:15 [OpenVPN] WireGuard Client 25624: 228.64:Information: Save default route to restore in case of wg crashes
2020-04-25 07:42:15 [OpenVPN] WireGuard Client 25624: 228.66:Information: ip route before starting wireguard
2020-04-25 07:42:15 [OpenVPN] WireGuard Client 25624: 228.67:default via 172.16.10.217 dev ppp0
172.16.10.217 dev ppp0 proto kernel scope link src 150.143.158.71
192.168.1.0/24 dev br0 proto kernel scope link src 192.168.1.1
239.0.0.0/8 dev br0 scope link
2020-04-25 07:42:15 [OpenVPN] WireGuard Client 25624: 228.68:Information: Check if wireguard is already running, and stop it if so
2020-04-25 07:42:15 [OpenVPN] WireGuard Client 25624: 228.71:Information: Check if wg0 interface is already available, and stop it if so
2020-04-25 07:42:16 [OpenVPN] WireGuard Client 25624: 229.97:Information: Check that all needed data exist in the configuration
2020-04-25 07:42:17 [OpenVPN] WireGuard Client 25624: 230.32:Information: Check that DNS service is working
2020-04-25 07:42:17 [OpenVPN] WireGuard Client 25624: 230.43:Information: DNS service is working
2020-04-25 07:42:17 [OpenVPN] WireGuard Client 25624: 230.44:Information: Starting WireGuard client. Please wait.
2020-04-25 07:42:17 [OpenVPN] WireGuard Client 25624: 230.45:Information: IP of EndPoint myserver.dyndns.org is 2.49.147.209.
2020-04-25 07:42:42 [OpenVPN] WireGuard Client 25624: 255.47:Information: Start the program / Add a new interface
2020-04-25 07:42:42 [OpenVPN] WireGuard Client 25624: 255.74:Information: Assign an IP address and peer
2020-04-25 07:42:42 [OpenVPN] WireGuard Client 25624: 255.76:Information: Configure the interface
2020-04-25 07:42:42 [OpenVPN] WireGuard Client 25624: 255.78:Information: Set config file for wg0 interface
2020-04-25 07:42:42 [OpenVPN] WireGuard Client 25624: 255.87:Information: Activate the interface
2020-04-25 07:42:42 [OpenVPN] WireGuard Client 25624: 255.88:Information: Check that the wg0 interface is available
2020-04-25 07:42:42 [OpenVPN] WireGuard Client 25624: 255.91:Information: Overriding The Default Route
2020-04-25 07:42:42 [OpenVPN] WireGuard Client 25624: 255.96:Information: Delete the default route
2020-04-25 07:42:42 [OpenVPN] WireGuard Client 25624: 255.98:Information: Restart firewall to apply iptables rules for WireGuard client.
2020-04-25 07:42:42 [OpenVPN] WireGuard Client 25624: 256.07:Generating Rules...
Done!
2020-04-25 07:42:44 [OpenVPN] WireGuard Client 25624: 257.60:Starting Firewall...
Done!
2020-04-25 07:42:44 [OpenVPN] WireGuard Client 25624: 257.61:Information: Optimize network settings
2020-04-25 07:42:44 [OpenVPN] WireGuard Client 25624: 257.63:Information: Show processes
2020-04-25 07:42:44 [OpenVPN] WireGuard Client 25624: 257.66:25442 root 1068 S /bin/sh /www/cgi-bin/kamoj.sh addon_wg_client=kamoj&raw_reply=1&wg_client_enable=1
25625 root 1036 S /bin/sh /www/cgi-bin/kamoj.sh addon_wg_client=kamoj&raw_reply=1&wg_client_enable=1
29166 root 3904 S < wireguard-go wg0
2020-04-25 07:42:44 [OpenVPN] WireGuard Client 25624: 257.67:Information: Show Wireguard status
2020-04-25 07:42:44 [OpenVPN] WireGuard Client 25624: 257.68:interface: wg0
public key: ejlXLQQFcH1qU5lpNfJ0inwUpvT/BXxzhBloNLiyIRk=
private key: (hidden)
listening port: 44770
peer: hA8R55jbCj2EhbAAXEaRKFqsnjpixUwKauFUTBCBeC4=
endpoint: 2.49.147.209:51820
allowed ips: 0.0.0.0/0
transfer: 0 B received, 148 B sent
2020-04-25 07:42:44 [OpenVPN] WireGuard Client 25624: 257.69:Information: ip route after starting wireguard
2020-04-25 07:42:44 [OpenVPN] WireGuard Client 25624: 257.71:0.0.0.0/1 dev wg0 scope link
2.49.147.209 via 172.16.10.217 dev ppp0
10.0.0.0/24 dev wg0 proto kernel scope link src 10.0.0.2
128.0.0.0/1 dev wg0 scope link
172.16.10.217 dev ppp0 proto kernel scope link src 150.143.158.71
192.168.1.0/24 dev br0 proto kernel scope link src 192.168.1.1
239.0.0.0/8 dev br0 scope link
2020-04-25 07:42:44 [OpenVPN] WireGuard Client 25624: 257.71:Information: Show ping time and to see if DNS is working
2020-04-25 07:43:14 [OpenVPN] WireGuard Client 25624: 287.76:
2020-04-25 07:43:14 [OpenVPN] WireGuard Client 25624: 287.77:Information: Wireguard Client completed start sequence
2020-04-25 07:43:14 [OpenVPN] WireGuard Client 25624: 287.78:=============================================================

 

[R. Gerrits]

I'm currently already using OpenVPN server on my R7800, to allow inbound VPN from my iPhone.
This always prevented my from also using the OpenVPN client for outbound VPN.

Would it now be possible to use WireGuard for outbound VPN, while still using OpenVPN for inbound VPN??

 

[jrbmw]

@kamoj
Applied 2 min delay for wireguard but still no internet.

2020-04-26 07:58:54 [OpenVPN] WireGuard Client 8681: 824.58:=============================================================
2020-04-26 07:58:54 [OpenVPN] WireGuard Client 8681: 824.59:Information: Check that WireGuard Client is installed
2020-04-26 07:58:54 [OpenVPN] WireGuard Client 8681: 824.61:Information: Check that WireGuard Client is enabled
2020-04-26 07:58:54 [OpenVPN] WireGuard Client 8681: 824.62:Information: Check that a configuration file is given and exist
2020-04-26 07:58:54 [OpenVPN] WireGuard Client 8681: 824.63:Information: Check if not router mode
2020-04-26 07:58:54 [OpenVPN] WireGuard Client 8681: 824.65:Information: Check that the Netgear OpenVPN Client is not enabled
2020-04-26 07:58:54 [OpenVPN] WireGuard Client 8681: 824.66:Information: Check that an OpenVPN Client is not running
2020-04-26 07:58:54 [OpenVPN] WireGuard Client 8681: 824.69:Information: Save default route to restore in case of wg crashes
2020-04-26 07:58:55 [OpenVPN] WireGuard Client 8681: 824.70:Information: ip route before starting wireguard
2020-04-26 07:58:55 [OpenVPN] WireGuard Client 8681: 824.72:default via 172.16.10.217 dev ppp0
172.16.10.217 dev ppp0 proto kernel scope link src 195.213.36.62
192.168.1.0/24 dev br0 proto kernel scope link src 192.168.1.1
239.0.0.0/8 dev br0 scope link
2020-04-26 07:58:55 [OpenVPN] WireGuard Client 8681: 824.73:Information: Check if wireguard is already running, and stop it if so
2020-04-26 07:58:55 [OpenVPN] WireGuard Client 8681: 824.75:Information: Check if wg0 interface is already available, and stop it if so
2020-04-26 07:58:56 [OpenVPN] WireGuard Client 8681: 825.96:Information: Check that all needed data exist in the configuration
2020-04-26 07:58:56 [OpenVPN] WireGuard Client 8681: 826.31:Information: Sleep 120 sec before starting, because wireguard_client_delay is set in NVRAM
2020-04-26 08:00:56 [OpenVPN] WireGuard Client 8681: 946.32:Information: Check that DNS service is working
2020-04-26 08:00:56 [OpenVPN] WireGuard Client 8681: 946.43:Information: DNS service is working
2020-04-26 08:00:56 [OpenVPN] WireGuard Client 8681: 946.44:Information: Check that time is synchronized
2020-04-26 08:00:56 [OpenVPN] WireGuard Client 8681: 946.45:Information: NTP time service is working.
2020-04-26 08:00:56 [OpenVPN] WireGuard Client 8681: 946.46:Information: Time is OK
2020-04-26 08:00:56 [OpenVPN] WireGuard Client 8681: 946.47:Information: Starting WireGuard client: /etc/wireguard/config/client/client_2.conf
2020-04-26 08:00:56 [OpenVPN] WireGuard Client 8681: 946.48:Information: IP of EndPoint myserver.dyndns.org is 2.49.147.209.
2020-04-26 08:00:56 [OpenVPN] WireGuard Client 8681: 946.50:Information: Start the program / Add a new interface
2020-04-26 08:00:57 [OpenVPN] WireGuard Client 8681: 946.75:Information: Assign an IP address and peer
2020-04-26 08:00:57 [OpenVPN] WireGuard Client 8681: 946.77:Information: Configure the interface
2020-04-26 08:00:57 [OpenVPN] WireGuard Client 8681: 946.78:Information: Set config file for wg0 interface
2020-04-26 08:00:57 [OpenVPN] WireGuard Client 8681: 946.84:Information: Activate the interface
2020-04-26 08:00:57 [OpenVPN] WireGuard Client 8681: 946.85:Information: Check that the wg0 interface is available
2020-04-26 08:00:57 [OpenVPN] WireGuard Client 8681: 946.87:Information: Overriding The Default Route
2020-04-26 08:00:57 [OpenVPN] WireGuard Client 8681: 946.89:Information: Delete the default route
2020-04-26 08:00:57 [OpenVPN] WireGuard Client 8681: 946.91:Information: Restart firewall to apply iptables rules for WireGuard client.
2020-04-26 08:00:57 [OpenVPN] WireGuard Client 8681: 946.95:Generating Rules...
Done!
2020-04-26 08:00:58 [OpenVPN] WireGuard Client 8681: 948.42:Starting Firewall...
Done!
2020-04-26 08:00:58 [OpenVPN] WireGuard Client 8681: 948.43:Information: Optimize network settings
2020-04-26 08:00:58 [OpenVPN] WireGuard Client 8681: 948.44:Information: Show processes
2020-04-26 08:00:58 [OpenVPN] WireGuard Client 8681: 948.47: 8454 root 1080 S /bin/sh /www/cgi-bin/kamoj.sh addon_wg_client=kamoj&raw_reply=1&wg_client_enable=1
8682 root 1048 S /bin/sh /www/cgi-bin/kamoj.sh addon_wg_client=kamoj&raw_reply=1&wg_client_enable=1
24816 root 3136 S < wireguard-go wg0
2020-04-26 08:00:58 [OpenVPN] WireGuard Client 8681: 948.48:Information: Show Wireguard status
2020-04-26 08:00:58 [OpenVPN] WireGuard Client 8681: 948.49:interface: wg0
public key: BlE79tZ6+KVJsxGKcojIm0vLDZm9XRPigb1lfSuCp0g=
private key: (hidden)
listening port: 57215
peer: hA8R55jbCj2EhbAAXEaRKFqsnjpixUwKauFUTBCBeC4=
endpoint: 2.49.147.209:51820
allowed ips: 0.0.0.0/0
transfer: 0 B received, 148 B sent
2020-04-26 08:00:58 [OpenVPN] WireGuard Client 8681: 948.50:Information: ip route after starting wireguard
2020-04-26 08:00:58 [OpenVPN] WireGuard Client 8681: 948.52:0.0.0.0/1 dev wg0 scope link
2.49.147.209 via 172.16.10.217 dev ppp0
10.0.0.0/24 dev wg0 proto kernel scope link src 10.0.0.3
128.0.0.0/1 dev wg0 scope link
172.16.10.217 dev ppp0 proto kernel scope link src 195.213.36.62
192.168.1.0/24 dev br0 proto kernel scope link src 192.168.1.1
239.0.0.0/8 dev br0 scope link
2020-04-26 08:00:58 [OpenVPN] WireGuard Client 8681: 948.53:Information: Show ping time and to see if DNS is working
2020-04-26 08:01:28 [OpenVPN] WireGuard Client 8681: 978.57:
2020-04-26 08:01:28 [OpenVPN] WireGuard Client 8681: 978.58:Information: Wireguard Client completed start sequence
2020-04-26 08:01:28 [OpenVPN] WireGuard Client 8681: 978.59:=============================================================

 

[kamoj]

Which provider do you have?
If it's your own server, please look into it, because in the client side all is fine.
Your server at "IP of EndPoint myserver.dyndns.org is 2.49.147.209" does not respond.
So your next step will be to contact your vpn provider (if any) to ask why.

but it seems pia dont support wireguard on routers yet.

 

[jrbmw]

Thought that might be a problem. I will look into it.
Im using pia for open vpn and using their dns servers.Would that cause any problem when I switch to wireguard ?

 

[kamoj]

No, I can't say it would be any problem. Not at all.
But I still don't understand what you are trying to do.

Thought that might be a problem. I will look into it.
Im using pia for open vpn and using their dns servers.Would that cause any problem when I switch to wireguard ?

 

[jrbmw]

No, I can't say it would be any problem. Not at all.
But I still don't understand what you are trying to do.

I used a wireguard config generator for the files but Im not subscribed to the dydns server in them so thats why wireguard didnt connect to the internet.
I wondered if using different provider dns servers would conflict as they do when I enable upnp.
The pia app on my laptop has the choice of ovpn or wireguard but as yet no wireguard config files available to download.
Ovpn works superbly and fast on the router The wireless internet on my laptop is actualy faster than my wired connected sat box...Big thanks to you and Voxel.
So my next mission is wireguard running

Regards

 

[jrbmw]

Got wireguard up and running now. Speed doesent seem as fast as opvn turbo .
When wireguard is enabled intenet works but the internet led on the router goes orange .
If I goto internet settings and apply them led goes white but I lose internet.
Log seems to indicate conflict with opvn.
After rebooting led white wireguard and internet on.