YazFi YazFi v4.x

[ZebMcKayhan]

Is it possible that YazFi can accept a ip6 address for the DNS fields? I’m using a smart dns service and they support multiple profiles but only the default profile is available by ip4 address.

For the time being I think you need to handle this manually.

some inspiration:

@SomeWhereOverTheRainBow just posted a way to replicate ipv4 DNS filter to ipv6 ip6tables:

uiDivStats - uiDivStats 3.x

I am running fully updated Merlin 386.4 on an AX86U with Diversion and UIStats. I have an issue in that Blocked Domains on the Diversion Tab (correct) does not match Domains currently on blocklist (it is doubled for some odd reason) on UIDivStats Tab. How can I fix this? Diversion must be...

www.snbforums.com

recently I tried to assign separate ipv6 subnets (and DNS) to YazFi clients but never managed to prevent clients from obtaining br0 ipv6 so I ended up moving the guest wifi's out of br0, this works ok for me, but there is probably other ways:

GitHub - ZebMcKayhan/WireguardManager: Manage/Install WireGuard on applicable ASUS routers

Manage/Install WireGuard on applicable ASUS routers - ZebMcKayhan/WireguardManager

github.com

 

[SomeWhereOverTheRainBow]

For the time being I think you need to handle this manually.

some inspiration:

@SomeWhereOverTheRainBow just posted a way to replicate ipv4 DNS filter to ipv6 ip6tables:

uiDivStats - uiDivStats 3.x

I am running fully updated Merlin 386.4 on an AX86U with Diversion and UIStats. I have an issue in that Blocked Domains on the Diversion Tab (correct) does not match Domains currently on blocklist (it is doubled for some odd reason) on UIDivStats Tab. How can I fix this? Diversion must be...

www.snbforums.com

recently I tried to assign separate ipv6 subnets (and DNS) to YazFi clients but never managed to prevent clients from obtaining br0 ipv6 so I ended up moving the guest wifi's out of br0, this works ok for me, but there is probably other ways:

GitHub - ZebMcKayhan/WireguardManager: Manage/Install WireGuard on applicable ASUS routers

Manage/Install WireGuard on applicable ASUS routers - ZebMcKayhan/WireguardManager

github.com

While we can talk about all day different methodology, and try things out, to be honest if there is ever going to be a true working method, it would probably be have to be baked into the setup.

 

[Jack Yaz]

v4.4.2 is now available
Changelog:

• FIXED: WebUI would fail to load last few settings - thanks @SomeWhereOverTheRainBow and @ugandy

 

[Waylo]

Can someone clarify the best way to update YazFi when installed? I'm getting what I think is a WebUI display error.

Using the WebUI, I checked for new version and it showed v4.4.2 was available. I hit update. It updated. However, the WebUI still shows the same version update is available.

When I putty in, YazFi tells me it is indeed updated to the latest.

Do I need a router reboot as well?

 

[Asusrouterlover]

I have Dns Leak After Update 4.4.2

i use surfshark for guest network

 

[Jack Yaz]

I have Dns Leak After Update 4.4.2

i use surfshark for guest network

Unlikely to be YazFi. The version changed nothing with the core code. Please provide details of how you are testing along with screenshot of your configuration

 

[Jack Yaz]

Can someone clarify the best way to update YazFi when installed? I'm getting what I think is a WebUI display error.

Using the WebUI, I checked for new version and it showed v4.4.2 was available. I hit update. It updated. However, the WebUI still shows the same version update is available.

When I putty in, YazFi tells me it is indeed updated to the latest.

Do I need a router reboot as well?

Not sure why this would happen. uf at CLI should resolve for now

 

[ZebMcKayhan]

Not sure why this would happen. uf at CLI should resolve for now

I only updated through cli (which was successful) and I got the same. Amtm and YazFi cli menu shows 4.4.2 while webpage shows 4.4.1.

Even tried using a browser which have never been logged in to router so its not browser cache...

I didn't reboot router after, maybee that will take care of it, but I cant right now.

uf at the CLI did the trick! Thanks!

//Zeb

 

[Asusrouterlover]

Unlikely to be YazFi. The version changed nothing with the core code. Please provide details of how you are testing along with screenshot of your configuration

restart the router every thing work fine
thanks alot bro

 

[Waylo]

Not sure why this would happen. uf at CLI should resolve for now

I rebooted and the webUI still showed the same update pending. Then I rechecked a day later and it's updated. Very odd.

However, now when I hit check update in the webUI, it shows the spinning circle endlessly. Anyone else?

 

[ZebMcKayhan]

I rebooted and the webUI still showed the same update pending. Then I rechecked a day later and it's updated. Very odd.

However, now when I hit check update in the webUI, it shows the spinning circle endlessly. Anyone else?

Did you try uf in YazFi menu (via putty)? That solved all these problems for me. Did not even have to reboot.

Just clicked check update in gui and it completes within acouple of seconds.

 

[Jack Yaz]

I rebooted and the webUI still showed the same update pending. Then I rechecked a day later and it's updated. Very odd.

However, now when I hit check update in the webUI, it shows the spinning circle endlessly. Anyone else?

you're on an old version of john's fork. update. https://www.snbforums.com/threads/fork-asuswrt-merlin-374-lts-release-52e7.76314/

 

[bennor]

However, now when I hit check update in the webUI, it shows the spinning circle endlessly. Anyone else?

Have you done a uf from the YazFi CLI? The YazFi GUI was showing 4.4.1 even though the CLI was showing 4.4.2. Doing a uf fixed the GUI for me. One may have to clear their browser's cache if it keeps bring back old pages.

 

[Waylo]

Thanks everyone for the suggestions. I'll try the uf command to see if this clears out everything.

(My sig was old, I'm on the latest on john's LTS throughout this Yazfi update attempt).

 

[Jack Yaz]

(My sig was old, I'm on the latest on john's LTS throughout this Yazfi update attempt).

oh, the fork i linked to should have solved the JS issues for stuff like updating my addons in WebUI. Maybe I need to revisit the fork code

 

[djethen]

Doesnt seem to be working if using with AIMesh node. is it just me or its work in progress?

 

[bennor]

Doesnt seem to be working if using with AIMesh node. is it just me or its work in progress?

See Jack's reply earlier in the thread: https://www.snbforums.com/threads/yazfi-v4-x.70308/post-709192

 

[fourty6and2]

Just implemented Yazfi and VPN for the guest network. Thank you very much for building this out - appreciate it!!

 

[Incubus32]

Hi guys, kinda new here. Planning to install this add on. But I have a few questions

Is it working now for AX86U? And also, can I use this guest network to connect my IoT smart devices?

And if so, do they have the option to communicate on my main local network? Thank you!

 

[bennor]

Is it working now for AX86U?

Where was it indicated YazFi wasn't working on the RT-AX86U? Generally YazFi works with most if not all Asus-Merlin supported routers. Per the YazFi GitHub page:

You must be running firmware no older than:

• Asuswrt-Merlin 384.5
• john9527 fork 374.43_32D6j9527

And also, can I use this guest network to connect my IoT smart devices?

Of course. Search through this thread and you see quite a few use YazFi for their IoT devices.

And if so, do they have the option to communicate on my main local network? Thank you!

See, if you haven't already, the YazFi GitHub page (https://github.com/jackyaz/YazFi) for the various options one can configure with YazFi. There are options to allow for one way or two way to Guest or to create a custom firewall rule.

If you want to have full communication between a WiFi Guest network client(s) and the main LAN/WiFi network, one may want to rethink their need to putting a WiFi client on the Guest WiFi or YazFi Guest WiFi network. One should review what YazFi feature expansion is designed/programmed to do, and it's options, and see if it fits one's needs or desires.