Release Asuswrt-Merlin 386.11 is now available for AC models

ColinTaylor · May 28, 2023

GunnarH said:
Lost connectivity to the router (rt-86U) shortly after a scheduled reboot which was performed at 06:00.

May 26 06:29:40 networkmap: Error locking /var/lock//usr/networkmap/nmp_conv_type.js.lock: 2 No such file or directory
May 26 06:29:40 networkmap: Error unlocking -1: 9 Bad file descriptor
May 26 06:29:40 networkmap: Error locking /var/lock//usr/networkmap/nmp_vendor_type.js.lock: 2 No such file or directory
May 26 06:29:40 networkmap: Error unlocking -1: 9 Bad file descriptor
May 26 06:29:40 networkmap: Error locking /var/lock//usr/networkmap/nmp_bwdpi_type.js.lock: 2 No such file or directory
May 26 06:29:40 networkmap: Error unlocking -1: 9 Bad file descriptor

Logging in showed that /usr/networkmap/nmp_bwdpi_type.js.lock did exist.
Where did the prefix /var/lock/ come from ?

It's a known bug in networkmap. Only Asus can fix it.

There's a workaround of sorts here:

Out of Memory Errors 388.1 / No space left on device [SOLUTIONS]

Just updating again to track the memory use. networkmap seems to be slowly creeping up and sysstate is level at around 8mb. From what I have read networkmap was changed to closed source at some point and RMerlin is not so much interested in fixing bugs for Asus for free anymore (don't blame...

www.snbforums.com

DTM · May 31, 2023

RMerlin said:
Reserved post.

Tried to update my AC88U from 386.10 to 386.11. Never came out of "Please Wait" mode. I finally manually rebooted it and thankfully it did come back up but still showed 386.10. So I tried to update two of my AC68P mesh nodes to 386.11. Same thing, both never came out of Please wait screen. They did finally reboot without power cycling but still show 386.10 firmware. For some reason they are not accepting the 386.11 firmware. I have never run into this before.

DTM · May 31, 2023

Don Draper said:
I just tried to update my RT-AC68U to the most recent version RT-AC68U_386.11_0. It tells me to please wait until it restarts and is still Current Version : 386.10. I have tried from a couple different browsers without luck. Any thoughts?

Same problem on both my AC68P nodes and AC88U main router. Won't accept 386.11 apparently.

drinkingbird · Jun 1, 2023

DTM said:
Same problem on both my AC68P nodes and AC88U main router. Won't accept 386.11 apparently.

Unplug all USB and factory reset with WPS button both before and after upgrading. Worked fine on my 1900/68U.

DTM · Jun 1, 2023

Thanks, but I think I will run 386.10 for a while longer. Something isn't right with this upgrade if it takes a ground zero reset just to get it to take it. IMO

drinkingbird · Jun 2, 2023

DTM said:
Thanks, but I think I will run 386.10 for a while longer. Something isn't right with this upgrade if it takes a ground zero reset just to get it to take it. IMO

Honestly I'm surprised you were able to get 386.10 on the AC68 without a reset. Are you having NVRAM issues?

Several versions have required factory reset, and it is a good idea from time to time anyway. 386.11 made some major changes to the AC68 (possibly the 88 too, don't recall) removing some VPN client options to free up NVRAM. So something you have set or left over may be interfering.

I did a factory reset before and after 386.11 on my AC1900 (AC68U) over the weekend, install went find and it has been very stable.

DTM · Jun 2, 2023

drinkingbird said:
Honestly I'm surprised you were able to get 386.10 on the AC68 without a reset. Are you having NVRAM issues?

Several versions have required factory reset, and it is a good idea from time to time anyway. 386.11 made some major changes to the AC68 (possibly the 88 too, don't recall) removing some VPN client options to free up NVRAM. So something you have set or left over may be interfering.

I did a factory reset before and after 386.11 on my AC1900 (AC68U) over the weekend, install went find and it has been very stable.

I am not having any issues. The three AC68Ps are mesh nodes and the AC88U is the main router. If I decide to upgrade for some reason I will do the reset but it is not necessary at this point.

bennor · Jun 2, 2023

DTM said:
Something isn't right with this upgrade if it takes a ground zero reset just to get it to take it. IMO

It's not that something isn't right with the firmware update, it's later versions of the RT-AC68U Asus-Merlin firmware are running into issues with the limited NVRAM on the RT-AC68U models. Weird things start happening on the RT-AC68U when the NVRAM gets full or close to full. First step, if one is having issues with being unable to install the latest Asus-Merlin 386.11 firmware on a RT-AC68U, is to check the NVRAM usage to see if it's full or close to full. If it is then try running the various script/code methods detailed in the various other discussions on Low NVRAM on the RT-AC68U to lower the NVRAM usage. That might free up the router to install the 386.11 on the RT-AC68U models. One example method (note - does not survive reboot) of potentially clearing some NVRAM space on a RT-AC68U running Asus-Merlin firmware:

for line in `nvram show | grep ^[^=]*=$ `; do var=${line%*=}; nvram unset $var; done; nvram commit

After installing the 386.11 firmware on a RT-AC68U and DSL-AC68U, make sure to follow the Change-Log directions of running the file clear_vpnclients.sh after firmware update.

DTM · Jun 2, 2023

bennor said:
It's not that something isn't right with the firmware update, it's later versions of the RT-AC68U Asus-Merlin firmware are running into issues with the limited NVRAM on the RT-AC68U models. Weird things start happening on the RT-AC68U when the NVRAM gets full or close to full. First step, if one is having issues with being unable to install the latest Asus-Merlin 386.11 firmware on a RT-AC68U, is to check the NVRAM usage to see if it's full or close to full. If it is then try running the various script/code methods detailed in the various other discussions on Low NVRAM on the RT-AC68U to lower the NVRAM usage. That might free up the router to install the 386.11 on the RT-AC68U models. One example method (note - does not survive reboot) of potentially clearing some NVRAM space on a RT-AC68U running Asus-Merlin firmware:

After installing the 386.11 firmware on a RT-AC68U and DSL-AC68U, make sure to follow the Change-Log directions of running the file clear_vpnclients.sh after firmware update.

Thanks. I am running my 3 AC68P routers as AI-Mesh nodes. NVRAM is not an issue there. The AC88U has plenty of available NVRAM. Like I said, I'll just run 386.10 for a while longer. No problems with it and no big need to update. If need be, I'll wipe all 4 and do the updates in the future.

Rhialto · Jun 3, 2023

I recently updated my RT-AC1900P from 386.7_2 to 386.11 and it's been 2 days in a row I'm still up past midnight and at midnight past 3 minutes I don't know what the router do but I get disconnected (I'm wired). It takes like 2 minutes to be back online. Not fun when playing in a ranked match! I could not even tell my teamates in Discord what was going on. There is only Diversion and uiDivStats installed and they are not set to compile stats or whetever at that hour. Is this happening to anyone else? I took a look in all menus if there was a router reboot option we could program but didn't see that.

The system log just show this:

Code:

May  5 01:05:20 wsdd2[413]: terminating.
Jun  3 00:04:38 roamast: ROAMING Start...

Which is strange because yesterday when it happened I didn't know what was going on and I switched the router off to restart it. Tonight I've let it go so there should be more lines between May 5 and June 3rd. I'm lost.

drinkingbird · Jun 3, 2023

Rhialto said:
I recently updated my RT-AC1900P from 386.7_2 to 386.11 and it's been 2 days in a row I'm still up past midnight and at midnight past 3 minutes I don't know what the router do but I get disconnected (I'm wired). It takes like 2 minutes to be back online. Not fun when playing in a ranked match! I could not even tell my teamates in Doscord what was going on. There is only Diversion and uiDivStats installed and they are not set to compile stats or whetever at that hour. Is this happening to anyone else? I took a look in all menus if there was a router reboot option we could program but didn't see that.

The system log just show this:

Code:

May 5 01:05:20 wsdd2[413]: terminating. Jun 3 00:04:38 roamast: ROAMING Start...

Which is strange because yesterday when it happened I didn't know what was going on and I switched the router off to restart it. Tonight I've let it go so there should be more lines between May 5 and June 3rd. I'm lost.

Did you factory reset or at least run the script to remove the extra VPN connections and fix the NVRAM issues?

bennor · Jun 3, 2023

Rhialto said:
I recently updated my RT-AC1900P from 386.7_2 to 386.11 and it's been 2 days in a row I'm still up past midnight and at midnight past 3 minutes I don't know what the router do but I get disconnected (I'm wired).

When you updated from 386.7_2 to 386.11 did you do a hard factory reset after updating to 386.11 and manually reconfigure (no import of saved router CFG file)?

What is the NVRAM usage (see Tools page in the GUI).

If you have the low NVRAM issue that plagues certain Asus routers (RT-AC68U and it's cousins) one may want to see the many other discussions on Low NVRAM to see how others are dealing with it. One may need to do a hard factory reset, manually reconfigure (no router CFG import), and follow the 386.11 Change_Log directions for running the clear_vpnclients.sh file.

Rhialto · Jun 3, 2023

drinkingbird said:
Did you factory reset or at least run the script to remove the extra VPN connections and fix the NVRAM issues?

Had no VPN but still ran the script after the update mostly because I was curious.

Rhialto · Jun 3, 2023

bennor said:
When you updated from 386.7_2 to 386.11 did you do a hard factory reset after updating to 386.11 and manually reconfigure (no import of saved router CFG file)?

What is the NVRAM usage (see Tools page in the GUI).

60841 / 65536 bytes which is normal for my model and I haven't updated to the problematic previous version but I still ran the script to clear what could be there just in case. No factory reset, I know it may help in some situations but not sure about what's happening, like I said exactly 3 minutes after midnight it's like the router restart. If it does it always at the same time, there must be something that trigger it.

What I may do tonight is remove Diversion and uiDivStats and the attached USB key and see if the same will happen.

dave14305 · Jun 3, 2023

Rhialto said:
like I said exactly 3 minutes after midnight it's like the router restart. If it does it always at the same time, there must be something that trigger it.

Login via ssh and look at cron jobs:

Code:

cru l

Rhialto said:
What I may do tonight is remove Diversion and uiDivStats and the attached USB key and see if the same will happen.

You should be able to happily run Diversion with the Standard list. If you’re using a larger list, try going back to standard. Consider removing only uiDivStats — it’s a heavy-duty Addon that can overwhelm a router at times.

Check your syslog levels on the syslog page. Have you ever changed them? How are they set now?

Rhialto · Jun 3, 2023

dave14305 said:
Login via ssh and look at cron jobs:
cru l

0 1-23 * * * /jffs/scripts/uiDivStats generate #uiDivStats_generate#
1 0 * * * /jffs/scripts/uiDivStats trimdb #uiDivStats_trim#
* * * * * /jffs/scripts/uiDivStats querylog #uiDivStats_querylog#
4-59/5 * * * * /jffs/scripts/uiDivStats flushtodb #uiDivStats_flushtodb#
00 4 * * Sun /bin/sh /opt/share/diversion/file/update-bl.div reset #Diversion_UpdateBL#
20 5 * * * /bin/sh /opt/share/diversion/file/rotate-logs.div #Diversion_RotateLogs#
20 17 * * * diversion count_ads count #Diversion_CountAds#
30 3 * * Sun /bin/sh /opt/share/diversion/file/stats.div #Diversion_WeeklyStats#

dave14305 said:
Consider removing only uiDivStats — it’s a heavy-duty Addon that can overwhelm a router at times.

I'll do that, I rarely look at stats anyway.

Rhialto · Jun 4, 2023

Nothing happened this time so maybe it was uiDivStats. Thanks all.

atkinsom · Jun 5, 2023

I'll be moving to a more up to date router over the next couple of months but want to squeeze a bit more life out of the AC68U. I'm currently on John's last beta firmware (53D7) on my AC68U. I'd like to give this firmware a go since it has more up to date security patches, OpenVPN etc.

Does this firmware have a DDNS entry for namecheap? if not is there a way to add that to the drop-down list? Thanks very much for any assistance.

Jeffrey Young · Jun 5, 2023

atkinsom said:
Does this firmware have a DDNS entry for namecheap? if not is there a way to add that to the drop-down list? Thanks very much for any assistance.

I don't know if namecheap is supported, but if not, you can use the custom ddns features and ddns-start custom scripts to update your ddns.

DDNS services

Third party firmware for Asus routers (newer codebase) - RMerl/asuswrt-merlin.ng

github.com

Wallace_n_Gromit · Jun 5, 2023

atkinsom said:
I'll be moving to a more up to date router over the next couple of months but want to squeeze a bit more life out of the AC68U. I'm currently on John's last beta firmware (53D7) on my AC68U. I'd like to give this firmware a go since it has more up to date security patches, OpenVPN etc.

Does this firmware have a DDNS entry for namecheap? if not is there a way to add that to the drop-down list? Thanks very much for any assistance.

There might be better/more secure/up to date alternatives since that particular project may be abandoned.

EDIT: I misunderstood what you were saying. You are thinking of moving TO Merlin 386.xx. I should remind myself of the context of this particular thread. Nevermind, that's a good choice.

[Fork] Asuswrt-Merlin 374 LTS Overview

ASUSWRT-MERLIN 374 LTS This is an LTS (Long Term Service) fork of Asuswrt-Merlin based on 374.43_2. This older code base has a history of being very stable, and some of the older code components may perform better in some environments. It may be a good choice for those who desire a 'set it and...

www.snbforums.com

Thread starter	Title	Forum	Replies	Date
B	Unable to establish VPN connection to my PiVPN (ovpn) from my Asus RT-AC86U running Asuswrt-Merlin 386.14	Asuswrt-Merlin	1	Oct 27, 2024
	Release Asuswrt-Merlin 386.14 is now available for AC models	Asuswrt-Merlin	201	Jul 20, 2024
	Beta Asuswrt-Merlin 386.14 beta is now available	Asuswrt-Merlin	35	Jul 1, 2024
	Release Asuswrt-Merlin 386.13 / 386.13_2 is now available for AC models	Asuswrt-Merlin	79	Apr 7, 2024
	Beta Asuswrt-Merlin 386.13 beta is now available for AC models	Asuswrt-Merlin	32	Mar 28, 2024
	Release Asuswrt-Merlin 386.12_6 is now available for AC models	Asuswrt-Merlin	168	Feb 26, 2024
	Release Asuswrt-Merlin 3004.388.8_4 is now available	Asuswrt-Merlin	26	Yesterday at 3:41 PM
	Release Asuswrt-Merlin 3006.102.2 is now available for Wifi 7 devices	Asuswrt-Merlin	62	Nov 3, 2024
F	Several Questions Re:Asuswrt-Merlin Feature Implementation	Asuswrt-Merlin	2	Oct 16, 2024
	How to enable port randomization in Asuswrt-Merlin?	Asuswrt-Merlin	4	Oct 12, 2024

Release Asuswrt-Merlin 386.11 is now available for AC models

Part of the Furniture

Occasional Visitor

Occasional Visitor

Part of the Furniture

Occasional Visitor

Part of the Furniture

Occasional Visitor

Part of the Furniture

Occasional Visitor

Senior Member

Part of the Furniture

Part of the Furniture

Senior Member

Senior Member

Part of the Furniture

Senior Member

Senior Member

Senior Member

Very Senior Member

Senior Member

Similar threads

Similar threads

Support SNBForums w/ Amazon

Sign Up For SNBForums Daily Digest