AB-Solution - The Ad Blocking Solution

[Bamsefar]

Hmmm.... I am on 3.9, and I can not access the menu:

admin@RT-AC88U:/tmp/home/root# ./ab-solution.sh
_ ___ ___ _ _ _
/_\ | _ )___/ __| ___| |_ _| |_(_)___ _ _
/ _ \| _ \___\__ \/ _ \ | || | _| / _ \ ' \
/_/ \_\___/ |___/\___/_|\_,_|\__|_\___/_||_|

Welcome
This is AB-Solution 3.9 [3.9.0]

looking for an installation
found AB-Solution on /tmp/mnt/sda1
checking installation state

It just hangs after "checking installation state" - nothing...

 

[Protik]

Hmmm.... I am on 3.9, and I can not access the menu:



It just hangs after "checking installation state" - nothing...

Do you have pixelserv running? I have found that in rare cases pixelserv hangs and prevents Ab-Solution from loading.

If you have pixelserv running, you can restart the service to see if that solves the issue. You can do that by issuing the following command in your router:

/opt/etc/init.d/S80pixelserv-tls restart

Please let us know if this resolved the issue.

Sent from my SGH-M919 using Tapatalk

 

[thelonelycoder]

Hmmm.... I am on 3.9, and I can not access the menu:



It just hangs after "checking installation state" - nothing...

Hmm, just wait, maybe you have some file corruption or <shrug>...

 

[Bamsefar]

Do you have pixelserv running? I have found that in rare cases pixelserv hangs and prevents Ab-Solution from loading.

If you have pixelserv running, you can restart the service to see if that solves the issue. You can do that by issuing the following command in your router:

/opt/etc/init.d/S80pixelserv-tls restart

Please let us know if this resolved the issue.

Sent from my SGH-M919 using Tapatalk

admin@RT-AC88U:/tmp/home/root# /opt/etc/init.d/S80pixelserv-tls check
Checking pixelserv-tls (AB-Solution)... alive.

Yes it's running
Restart makes no difference.

 

[Protik]

Yes it's running

This means the service is running. But there is a chance it is not running properly. Restarting the service might help.

Sent from my SGH-M919 using Tapatalk

 

[thelonelycoder]

Yes it's running
Restart makes no difference.

Can you open the pixelserv stats page?
<pixelserv-tls IP>/stats

 

[Bamsefar]

No I can not - it is blank.

 

[Bamsefar]

No I can not - it is blank.

Or I should say, I can open it - however it is 100% blank.

 

[thelonelycoder]

No I can not - it is blank.

What version of pixelserv are you running? The Kl-test or the last stable release from Entware Kk?
You can restart pixelserv with:

/opt/etc/init.d/S80pixelserv-tls restart

 

[Bamsefar]

This means the service is running. But there is a chance it is not running properly. Restarting the service might help.

Sent from my SGH-M919 using Tapatalk

Sorry I edited my post above - restart changes nothing.

 

[Bamsefar]

What version of pixelserv are you running? The Kl-test or the last stable release from Entware Kk?
You can restart pixelserv with:

/opt/etc/init.d/S80pixelserv-tls restart

I have restarted, multiple times, changes nothing.

I can not say which version, since it is the one that comes with AB-Solution. I have not upgrade "on ages":


# script name and version numbers
app_info(){
appName=AB-Solution
appVersion=3.9
devVersion=0
appScript=ab-solution.sh
releaseDate=20170722
}

 

[thelonelycoder]

Sorry I edited my post above - restart changes nothing.

Any errors in the syslog?
If pixelserv restarts it will tell so and post the ports it is running on.

 

[Bamsefar]

SystemLog:

Nov 24 19:21:01 pixelserv[2536]: pixelserv-tls version: v35.HZ12.Ki compiled: Oct 31 2016 11:29:48 options: 10.168.1.15
Nov 24 19:21:01 pixelserv[2536]: Listening on :10.168.1.15:80
Nov 24 19:21:01 pixelserv[2536]: Listening on :10.168.1.15:443

 

[thelonelycoder]

I have restarted, multiple times, changes nothing.

I can not say which version, since it is the one that comes with AB-Solution. I have not upgrade "on ages":


# script name and version numbers
app_info(){
appName=AB-Solution
appVersion=3.9
devVersion=0
appScript=ab-solution.sh
releaseDate=20170722
}

The pixelserv version, not AB, since you clearly run on 3.9.
The version should show with this by entering the whole line into the terminal:

wget -qO - http://doubleclick.com/servstats.txt | grep -o ' v[0-9a-zA-Z\.\-]*' | sed 's/^ //; s/version//'

 

[thelonelycoder]

SystemLog:

I think it's time to reboot the router and then see again.
If everything is working the, update AB and then enter ps and select Entware management. Run update and upgrade all packages.

 

[Bamsefar]

The pixelserv version, not AB, since you clearly run on 3.9.
The version should show with this by entering the whole line into the terminal:

wget -qO - http://doubleclick.com/servstats.txt | grep -o ' v[0-9a-zA-Z\.\-]*' | sed 's/^ //; s/version//'

That command hangs.

 

[Bamsefar]

I think it's time to reboot the router and then see again.
If everything is working the, update AB and then enter ps and select Entware management. Run update and upgrade all packages.

It's been up 11 hours...

 

[Bamsefar]

That command hangs.

This was funny:

admin@RT-AC88U:/tmp/mnt/sda1/adblocking# wget http://doubleclick.com/servstats.txt
--2017-11-24 19:38:01-- http://doubleclick.com/servstats.txt
Resolving doubleclick.com... 2a00:1450:400f:804::200e, 10.168.1.15
Connecting to doubleclick.com|2a00:1450:400f:804::200e|:80... failed: Network is unreachable.
Connecting to doubleclick.com|10.168.1.15|:80... ^C

 

[Bamsefar]

However if I enter that in a web browser:

pixelserv-tls version: v35.HZ12.Ki compiled: Oct 31 2016 11:29:48 options: 10.168.1.15
944 uts, 0 log, 37 req, 317 avg, 347 rmx, 56 tav, 234 tmx, 32 slh, 0 slm, 0 sle, 0 slu, 2 nfe, 0 gif, 1 ico, 0 txt, 0 jpg, 0 png, 0 swf, 0 sta, 1 stt, 0 ufe, 0 rdr, 0 nou, 0 pth, 0 204, 0 pst, 0 hed, 0 bad, 0 err, 0 tmo, 33 cls

 

[Bamsefar]

Reboot made no difference.