Menu
What's new
By:
Filters Better Search

AdGuardHome Asuswrt-Merlin-AdGuardHome-Installer (AMAGHI) cont.

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

Status
Not open for further replies.
Tech9 said:
I've changed the firmware version to check something, but you get the idea. Example with OpenDNS.

On the router (will be used by the router only):

View attachment 54608

View attachment 54609

View attachment 54610

On AdGuard Home (will be used by your clients):

View attachment 54611

View attachment 54612

I'm using 2x servers with parallel requests to speed up resolution, eventually. Experiment what works for you better.

Some details above depend on how you have installed AdGuard Home. The questions and the answers.
Click to expand...
Greatly appreciate you providing these detailed instructions and follow up validation.
 
I don't use AdGuard Home and just play with the available Asuswrt-Merlin supported router from time to time. When someone reports a bug I may try to replicate it and eventually find a workaround. The best source of AdGuard Home related information is @SomeWhereOverTheRainBow.
 
SomeWhereOverTheRainBow said:
I don't know if you intended to,

github.com

Unbound-Merlin-UI/unbound_service.sh at master · dave14305/Unbound-Merlin-UI

ASUSWRT-Merlin Unbound User Interface. Contribute to dave14305/Unbound-Merlin-UI development by creating an account on GitHub.
github.com github.com

but I notice the prefer-ip6: yes actually makes it try to avoid processing queries over ipv4. Not sure if this behavior is best when all instances of IPV6 are available. A simple " do-ip6: yes" would be most sufficient.
Click to expand...
If IPv6 is enabled, I want to prefer its use over IPv4. The preference only affects outbound queries from Unbound.
 
SomeWhereOverTheRainBow said:
View attachment 54598

@Tech9 mines been going for

View attachment 54594

No reboots so far.

View attachment 54595
View attachment 54596

I am even trying out the remote DoH, DoT, and DoQ services .;)


View attachment 54597

Filters and Regex I am using

Code: 
filters:
  - enabled: true
    url: https://adguardteam.github.io/HostlistsRegistry/assets/filter_1.txt
    name: AdGuard DNS filter
    id: 1701316907
  - enabled: true
    url: https://adguardteam.github.io/HostlistsRegistry/assets/filter_2.txt
    name: AdAway Default Blocklist
    id: 1701316908
  - enabled: true
    url: https://adguardteam.github.io/HostlistsRegistry/assets/filter_29.txt
    name: 'CHN: AdRules DNS List'
    id: 1701316909
  - enabled: true
    url: https://adguardteam.github.io/HostlistsRegistry/assets/filter_50.txt
    name: uBlock₀ filters – Badware risks
    id: 1701316910
  - enabled: true
    url: https://adguardteam.github.io/HostlistsRegistry/assets/filter_11.txt
    name: Malicious URL Blocklist (URLHaus)
    id: 1701316911
  - enabled: true
    url: https://adguardteam.github.io/HostlistsRegistry/assets/filter_9.txt
    name: The Big List of Hacked Malware Web Sites
    id: 1701316912
  - enabled: true
    url: https://adguardteam.github.io/HostlistsRegistry/assets/filter_42.txt
    name: ShadowWhisperer's Malware List
    id: 1701316913
  - enabled: true
    url: https://adguardteam.github.io/HostlistsRegistry/assets/filter_10.txt
    name: Scam Blocklist by DurableNapkin
    id: 1701316914
  - enabled: true
    url: https://adguardteam.github.io/HostlistsRegistry/assets/filter_18.txt
    name: Phishing Army
    id: 1701316915
  - enabled: true
    url: https://adguardteam.github.io/HostlistsRegistry/assets/filter_8.txt
    name: NoCoin Filter List
    id: 1701316916
  - enabled: true
    url: https://adguardteam.github.io/HostlistsRegistry/assets/filter_44.txt
    name: HaGeZi's Threat Intelligence Feeds
    id: 1701316917
  - enabled: true
    url: https://adguardteam.github.io/HostlistsRegistry/assets/filter_21.txt
    name: 'CHN: anti-AD'
    id: 1701316918
  - enabled: true
    url: https://adguardteam.github.io/HostlistsRegistry/assets/filter_12.txt
    name: Dandelion Sprout's Anti-Malware List
    id: 1701316919
  - enabled: true
    url: https://adguardteam.github.io/HostlistsRegistry/assets/filter_35.txt
    name: 'HUN: Hufilter'
    id: 1701316920
  - enabled: true
    url: https://adguardteam.github.io/HostlistsRegistry/assets/filter_30.txt
    name: Phishing URL Blocklist (PhishTank and OpenPhish)
    id: 1701316921
  - enabled: true
    url: https://adguardteam.github.io/HostlistsRegistry/assets/filter_22.txt
    name: 'IDN: ABPindo'
    id: 1701316922
  - enabled: true
    url: https://adguardteam.github.io/HostlistsRegistry/assets/filter_38.txt
    name: 1Hosts (mini)
    id: 1701316923
  - enabled: true
    url: https://adguardteam.github.io/HostlistsRegistry/assets/filter_19.txt
    name: 'IRN: PersianBlocker list'
    id: 1701316924
  - enabled: true
    url: https://adguardteam.github.io/HostlistsRegistry/assets/filter_4.txt
    name: Dan Pollock's List
    id: 1701316925
  - enabled: true
    url: https://adguardteam.github.io/HostlistsRegistry/assets/filter_43.txt
    name: 'ISR: EasyList Hebrew'
    id: 1701316926
  - enabled: true
    url: https://adguardteam.github.io/HostlistsRegistry/assets/filter_49.txt
    name: HaGeZi's Ultimate Blocklist
    id: 1701316927
  - enabled: true
    url: https://adguardteam.github.io/HostlistsRegistry/assets/filter_25.txt
    name: 'KOR: List-KR DNS'
    id: 1701316928
  - enabled: true
    url: https://adguardteam.github.io/HostlistsRegistry/assets/filter_27.txt
    name: OISD Blocklist Big
    id: 1701316929
  - enabled: true
    url: https://adguardteam.github.io/HostlistsRegistry/assets/filter_3.txt
    name: Peter Lowe's Blocklist
    id: 1701316930
  - enabled: true
    url: https://adguardteam.github.io/HostlistsRegistry/assets/filter_33.txt
    name: Steven Black's List
    id: 1701316931
  - enabled: true
    url: https://adguardteam.github.io/HostlistsRegistry/assets/filter_45.txt
    name: HaGeZi's Allowlist Referral
    id: 1701316932
  - enabled: true
    url: https://adguardteam.github.io/HostlistsRegistry/assets/filter_15.txt
    name: 'KOR: YousList'
    id: 1701316933
  - enabled: true
    url: https://adguardteam.github.io/HostlistsRegistry/assets/filter_36.txt
    name: 'LIT: EasyList Lithuania'
    id: 1701316934
  - enabled: true
    url: https://adguardteam.github.io/HostlistsRegistry/assets/filter_46.txt
    name: HaGeZi's Anti-Piracy Blocklist
    id: 1701316935
  - enabled: true
    url: https://adguardteam.github.io/HostlistsRegistry/assets/filter_20.txt
    name: 'MKD: Macedonian Pi-hole Blocklist'
    id: 1701316936
  - enabled: true
    url: https://adguardteam.github.io/HostlistsRegistry/assets/filter_47.txt
    name: HaGeZi's Gambling Blocklist
    id: 1701316937
  - enabled: true
    url: https://adguardteam.github.io/HostlistsRegistry/assets/filter_23.txt
    name: WindowsSpyBlocker - Hosts spy rules
    id: 1701316938
  - enabled: true
    url: https://adguardteam.github.io/HostlistsRegistry/assets/filter_13.txt
    name: 'NOR: Dandelion Sprouts nordiske filtre'
    id: 1701316939
  - enabled: true
    url: https://adguardteam.github.io/HostlistsRegistry/assets/filter_7.txt
    name: Perflyst and Dandelion Sprout's Smart-TV Blocklist
    id: 1701316940
  - enabled: true
    url: https://adguardteam.github.io/HostlistsRegistry/assets/filter_41.txt
    name: 'POL: CERT Polska List of malicious domains'
    id: 1701316941
  - enabled: true
    url: https://adguardteam.github.io/HostlistsRegistry/assets/filter_16.txt
    name: 'VNM: ABPVN List'
    id: 1701316942
  - enabled: true
    url: https://adguardteam.github.io/HostlistsRegistry/assets/filter_14.txt
    name: 'POL: Polish filters for Pi-hole'
    id: 1701316943
  - enabled: true
    url: https://adguardteam.github.io/HostlistsRegistry/assets/filter_40.txt
    name: 'TUR: Turkish Ad Hosts'
    id: 1701316944
  - enabled: true
    url: https://adguardteam.github.io/HostlistsRegistry/assets/filter_17.txt
    name: 'SWE: Frellwit''s Swedish Hosts File'
    id: 1701316945
  - enabled: true
    url: https://adguardteam.github.io/HostlistsRegistry/assets/filter_26.txt
    name: 'TUR: turk-adlist'
    id: 1701316946
whitelist_filters: []
user_rules:
  - /^(.+[_.-])?adse?rv(er?|ice)?s?[0-9]*[_.-]/
  - /^(.+[_.-])?telemetry[_.-]/
  - /^ad([sxv]?[0-9]*|system)[_.-]([^.[:space:]]+\.){1,}|[_.-]ad([sxv]?[0-9]*|system)[_.-]/
  - /^adim(age|g)s?[0-9]*[_.-]/
  - /^adtrack(er|ing)?[0-9]*[_.-]/
  - /^advert(s|is(ing|ements?))?[0-9]*[_.-]/
  - /^aff(iliat(es?|ion))?[_.-]/
  - /^analytics?[_.-]/
  - /^banners?[_.-]/
  - /^beacons?[0-9]*[_.-]/
  - /^count(ers?)?[0-9]*[_.-]/
  - /^mads\./
  - /^pixels?[-.]/
  - /^stat(s|istics)?[0-9]*[_.-]/
  - /(^|\.).+xxx$/
  - /(^|\.).+sexy$/
  - /(^|\.).+webcam$/
  - /(^|\.).+sex$/
  - /(^|\.).+porn$/
  - /(^|\.).+tube$/
  - /(^|\.).+cam$/
  - /(^|\.).+adult$/
  - /^(.+[_.-])?eulerian\.net$/
  - /^(.+[_.-])?dnsdelegation\.io$/
  - /^(.+[_.-])?amp(project)?\./
  - /^(www[0-9]*\.)?xn--/
Click to expand...
Was reviewing your Filters and Regex. There is allot of unique filters that probably don't apply to most people. Current using standard AdGuard filter. What would you suggest for most user?
 
routewhat said:

Known DNS Providers | AdGuard DNS Knowledge Base

Here we suggest a list of trusted DNS providers. To use them, first install AdGuard Ad Blocker or AdGuard VPN on your device. Then, on the same device, click the link to a provider in this article
adguard-dns.io adguard-dns.io

It doesn't work anymore cos when I click here, this is what I get.

adguard%3Aadd_dns_server?address=tls://dns.adguard-dns.com&name=AdGuard%20DNS

View attachment 54764
Click to expand...
You have to right click, and select copy link. otherwise it doesn't work.
 
Terrabytes said:
Was reviewing your Filters and Regex. There is allot of unique filters that probably don't apply to most people. Current using standard AdGuard filter. What would you suggest for most user?
Click to expand...
This is what I use in my AdGuardHome instance on the router:

Code: 
filters:
  - enabled: true
    url: https://adguardteam.github.io/HostlistsRegistry/assets/filter_1.txt
    name: AdGuard DNS filter
    id: 1701316907
  - enabled: true
    url: https://adguardteam.github.io/HostlistsRegistry/assets/filter_2.txt
    name: AdAway Default Blocklist
    id: 1701316908
  - enabled: true
    url: https://adguardteam.github.io/HostlistsRegistry/assets/filter_29.txt
    name: 'CHN: AdRules DNS List'
    id: 1701316909
  - enabled: true
    url: https://adguardteam.github.io/HostlistsRegistry/assets/filter_50.txt
    name: uBlock₀ filters – Badware risks
    id: 1701316910
  - enabled: true
    url: https://adguardteam.github.io/HostlistsRegistry/assets/filter_11.txt
    name: Malicious URL Blocklist (URLHaus)
    id: 1701316911
  - enabled: true
    url: https://adguardteam.github.io/HostlistsRegistry/assets/filter_9.txt
    name: The Big List of Hacked Malware Web Sites
    id: 1701316912
  - enabled: true
    url: https://adguardteam.github.io/HostlistsRegistry/assets/filter_42.txt
    name: ShadowWhisperer's Malware List
    id: 1701316913
  - enabled: true
    url: https://adguardteam.github.io/HostlistsRegistry/assets/filter_10.txt
    name: Scam Blocklist by DurableNapkin
    id: 1701316914
  - enabled: true
    url: https://adguardteam.github.io/HostlistsRegistry/assets/filter_18.txt
    name: Phishing Army
    id: 1701316915
  - enabled: true
    url: https://adguardteam.github.io/HostlistsRegistry/assets/filter_8.txt
    name: NoCoin Filter List
    id: 1701316916
  - enabled: true
    url: https://adguardteam.github.io/HostlistsRegistry/assets/filter_44.txt
    name: HaGeZi's Threat Intelligence Feeds
    id: 1701316917
  - enabled: true
    url: https://adguardteam.github.io/HostlistsRegistry/assets/filter_21.txt
    name: 'CHN: anti-AD'
    id: 1701316918
  - enabled: true
    url: https://adguardteam.github.io/HostlistsRegistry/assets/filter_12.txt
    name: Dandelion Sprout's Anti-Malware List
    id: 1701316919
  - enabled: true
    url: https://adguardteam.github.io/HostlistsRegistry/assets/filter_35.txt
    name: 'HUN: Hufilter'
    id: 1701316920
  - enabled: true
    url: https://adguardteam.github.io/HostlistsRegistry/assets/filter_30.txt
    name: Phishing URL Blocklist (PhishTank and OpenPhish)
    id: 1701316921
  - enabled: true
    url: https://adguardteam.github.io/HostlistsRegistry/assets/filter_22.txt
    name: 'IDN: ABPindo'
    id: 1701316922
  - enabled: true
    url: https://adguardteam.github.io/HostlistsRegistry/assets/filter_38.txt
    name: 1Hosts (mini)
    id: 1701316923
  - enabled: true
    url: https://adguardteam.github.io/HostlistsRegistry/assets/filter_19.txt
    name: 'IRN: PersianBlocker list'
    id: 1701316924
  - enabled: true
    url: https://adguardteam.github.io/HostlistsRegistry/assets/filter_4.txt
    name: Dan Pollock's List
    id: 1701316925
  - enabled: true
    url: https://adguardteam.github.io/HostlistsRegistry/assets/filter_43.txt
    name: 'ISR: EasyList Hebrew'
    id: 1701316926
  - enabled: true
    url: https://adguardteam.github.io/HostlistsRegistry/assets/filter_49.txt
    name: HaGeZi's Ultimate Blocklist
    id: 1701316927
  - enabled: true
    url: https://adguardteam.github.io/HostlistsRegistry/assets/filter_25.txt
    name: 'KOR: List-KR DNS'
    id: 1701316928
  - enabled: true
    url: https://adguardteam.github.io/HostlistsRegistry/assets/filter_27.txt
    name: OISD Blocklist Big
    id: 1701316929
  - enabled: true
    url: https://adguardteam.github.io/HostlistsRegistry/assets/filter_3.txt
    name: Peter Lowe's Blocklist
    id: 1701316930
  - enabled: true
    url: https://adguardteam.github.io/HostlistsRegistry/assets/filter_33.txt
    name: Steven Black's List
    id: 1701316931
  - enabled: true
    url: https://adguardteam.github.io/HostlistsRegistry/assets/filter_45.txt
    name: HaGeZi's Allowlist Referral
    id: 1701316932
  - enabled: true
    url: https://adguardteam.github.io/HostlistsRegistry/assets/filter_15.txt
    name: 'KOR: YousList'
    id: 1701316933
  - enabled: true
    url: https://adguardteam.github.io/HostlistsRegistry/assets/filter_36.txt
    name: 'LIT: EasyList Lithuania'
    id: 1701316934
  - enabled: true
    url: https://adguardteam.github.io/HostlistsRegistry/assets/filter_46.txt
    name: HaGeZi's Anti-Piracy Blocklist
    id: 1701316935
  - enabled: true
    url: https://adguardteam.github.io/HostlistsRegistry/assets/filter_20.txt
    name: 'MKD: Macedonian Pi-hole Blocklist'
    id: 1701316936
  - enabled: true
    url: https://adguardteam.github.io/HostlistsRegistry/assets/filter_47.txt
    name: HaGeZi's Gambling Blocklist
    id: 1701316937
  - enabled: true
    url: https://adguardteam.github.io/HostlistsRegistry/assets/filter_23.txt
    name: WindowsSpyBlocker - Hosts spy rules
    id: 1701316938
  - enabled: true
    url: https://adguardteam.github.io/HostlistsRegistry/assets/filter_13.txt
    name: 'NOR: Dandelion Sprouts nordiske filtre'
    id: 1701316939
  - enabled: true
    url: https://adguardteam.github.io/HostlistsRegistry/assets/filter_7.txt
    name: Perflyst and Dandelion Sprout's Smart-TV Blocklist
    id: 1701316940
  - enabled: true
    url: https://adguardteam.github.io/HostlistsRegistry/assets/filter_41.txt
    name: 'POL: CERT Polska List of malicious domains'
    id: 1701316941
  - enabled: true
    url: https://adguardteam.github.io/HostlistsRegistry/assets/filter_16.txt
    name: 'VNM: ABPVN List'
    id: 1701316942
  - enabled: true
    url: https://adguardteam.github.io/HostlistsRegistry/assets/filter_14.txt
    name: 'POL: Polish filters for Pi-hole'
    id: 1701316943
  - enabled: true
    url: https://adguardteam.github.io/HostlistsRegistry/assets/filter_40.txt
    name: 'TUR: Turkish Ad Hosts'
    id: 1701316944
  - enabled: true
    url: https://adguardteam.github.io/HostlistsRegistry/assets/filter_17.txt
    name: 'SWE: Frellwit''s Swedish Hosts File'
    id: 1701316945
  - enabled: true
    url: https://adguardteam.github.io/HostlistsRegistry/assets/filter_26.txt
    name: 'TUR: turk-adlist'
    id: 1701316946
whitelist_filters: []
user_rules:
  - /^(.+[_.-])?adse?rv(er?|ice)?s?[0-9]*[_.-]/
  - /^(.+[_.-])?telemetry[_.-]/
  - /^ad([sxv]?[0-9]*|system)[_.-]([^.[:space:]]+\.){1,}|[_.-]ad([sxv]?[0-9]*|system)[_.-]/
  - /^adim(age|g)s?[0-9]*[_.-]/
  - /^adtrack(er|ing)?[0-9]*[_.-]/
  - /^advert(s|is(ing|ements?))?[0-9]*[_.-]/
  - /^aff(iliat(es?|ion))?[_.-]/
  - /^analytics?[_.-]/
  - /^banners?[_.-]/
  - /^beacons?[0-9]*[_.-]/
  - /^count(ers?)?[0-9]*[_.-]/
  - /^mads\./
  - /^pixels?[-.]/
  - /^stat(s|istics)?[0-9]*[_.-]/
  - /(^|\.).+xxx$/
  - /(^|\.).+sexy$/
  - /(^|\.).+webcam$/
  - /(^|\.).+sex$/
  - /(^|\.).+porn$/
  - /(^|\.).+tube$/
  - /(^|\.).+cam$/
  - /(^|\.).+adult$/
  - /^(.+[_.-])?eulerian\.net$/
  - /^(.+[_.-])?dnsdelegation\.io$/
  - /^(.+[_.-])?amp(project)?\./
  - /^(www[0-9]*\.)?xn--/
 
dave14305 said:
If IPv6 is enabled, I want to prefer its use over IPv4. The preference only affects outbound queries from Unbound.
Click to expand...
On some "edge" cases, this might not be a preferred behavior when it comes to returning stable "ipv4" name space resolution. I have seen some instances where the preference to IPV6 over IPV4 has caused issues with queries properly resolving, but it is very "edge" case one-off instances.
 
SomeWhereOverTheRainBow said:
You have to right click, and select copy link. otherwise it doesn't work.
Click to expand...

Known DNS Providers | AdGuard DNS Knowledge Base

Here we suggest a list of trusted DNS providers. To use them, first install AdGuard Ad Blocker or AdGuard VPN on your device. Then, on the same device, click the link to a provider in this article
adguard-dns.io adguard-dns.io

I did that that's what I got after right click and the same result with inspect adguard:add_dns_server?address=https://family.adguard-dns.com/dns-query&name=AdGuard DNS

Any suggestions on my other questions?
 
routewhat said:

Known DNS Providers | AdGuard DNS Knowledge Base

Here we suggest a list of trusted DNS providers. To use them, first install AdGuard Ad Blocker or AdGuard VPN on your device. Then, on the same device, click the link to a provider in this article
adguard-dns.io adguard-dns.io

I did that that's what I got after right click and the same result with inspect adguard:add_dns_server?address=https://family.adguard-dns.com/dns-query&name=AdGuard DNS

Any suggestions on my other questions?
Click to expand...
copy the address directly.

e.g.
1702250968808.png
 
SOLVED.
Good morning, i wanted to ask if there is a manual procedure to install the version previous to the current AdGuard Home v0.107.42 ( normal release), with this i am detecting cache times ranging from the usual 0.20ms to values over 90ms having an average on the total dins about 35-40ms. In the AdGuard Home v0.107.41 version with the same settings the average resolution time was around 5-8ms. The settings are the same, 2 TLS DNS servers (Google and Cloudflare) in parallel mode, increased the cache size parameters based on the advice i found here on the forum and activated Oisid Big List and the 2 Adguard. Has anyone else encountered this problem?

Update: In general settings i had the "parental control web service" active, i'm sure i didn't have it before, now i've deactivated it, it could be that it increased the general delay on DNS resolution, let's see if this is the problem.

Update2: it was the "parental control", whit it disabled the Average processing time back to 3-6 ms, probably the Ac86u is too old to process this option without introducing a huge delay.
 
Last edited:
After all that's been said and done I had to sadly call it quits running AGH off Merlin... https://www.snbforums.com/threads/adguard-home-uses-97-of-ram.82212/post-839645 <- my own optimization tips on keeping it running stable.

Since then my AXE11000 had mostly been fine until lately when I updated to 388.5 alpha build. Lockups / DNS resolution errors began to resurface and Skynet also began acting up. Compounded by issues with my AXE11000 actively "refusing" certain 6Ghz clients, I decided to nuke my setup and move to OPNSense + AGH on a VM. Alas, I thought it would work out fine...When it works it really works great.
 
Try the final release version.
 
bloomwow said:
After all that's been said and done I had to sadly call it quits running AGH off Merlin... https://www.snbforums.com/threads/adguard-home-uses-97-of-ram.82212/post-839645 <- my own optimization tips on keeping it running stable.

Since then my AXE11000 had mostly been fine until lately when I updated to 388.5 alpha build. Lockups / DNS resolution errors began to resurface and Skynet also began acting up. Compounded by issues with my AXE11000 actively "refusing" certain 6Ghz clients, I decided to nuke my setup and move to OPNSense + AGH on a VM. Alas, I thought it would work out fine...When it works it really works great.
Click to expand...
I don't know if you have updated your auxillary files or tried the latest version since you've made that post, https://www.snbforums.com/threads/adguard-home-uses-97-of-ram.82212/post-839645 , but there have been numerous memory optimizations done under the hood to make AGH run more stable, and run better since you have made that post. Alas, it could simply be the Wifi stability of that particular model Router requires more juice than AGH will allow the router to have. I am not sure if you have tested the latest updates, but it is worth a shot if you haven't.
 
Have to deal with this every update now, resets my whole config file.

Info: Checking AdGuardHome configuration...
2023/12/13 17:19:35 [error] Couldn't get logging settings from the configuration: yaml: line 5: mapping values are not allowe
ed in this context
Info: Moving invalid configuration file to /opt/etc/AdGuardHome/AdGuardHome.yaml.err.
=> Do you want to redirect all DNS resolutions on your network through to AdGuardHome? [y/n]:
Click to expand...

I don't use any special settings or AG build.
 
privacyguy123 said:
Have to deal with this every update now, resets my whole config file.



I don't use any special settings or AG build.
Click to expand...
Something in your .yaml does not agree with AGH's .yaml checker. Maybe you have a deprecated setting inside your saved .yaml file, or something in your .yaml file is improperly formatted. AGH is very sensitive to the .yaml formatting.

Maybe this link below will help you identify improper formatting in your .yaml config:

stackoverflow.com

How to fix "mapping values are not allowed in this context " error in yaml file?

I've browsed similar questions and believe i've applied all that i've been able to glean from answers. I have a .yml file where as far as I can tell each element is formatted identically. And yet
stackoverflow.com stackoverflow.com

I suggest you read your config file line by line to ensure it is properly .yaml formatted. Otherwise this issues is likely not going away.

A shot in the dark guess is that your issue is present at the bottom of your .yaml file.

Heres what mine looks like:
Code: 
log:
  file: ""
  max_backups: 0
  max_size: 100
  max_age: 3
  compress: false
  local_time: false
  verbose: false
os:
  group: ""
  user: ""
  rlimit_nofile: 0
schema_version: 27

2023/12/13 17:19:35 [error] Couldn't get logging settings from the configuration: yaml: line 5: mapping values are not allowe
ed in this context
Info: Moving invalid configuration file to /opt/etc/AdGuardHome/AdGuardHome.yaml.err.
Click to expand...
 
Last edited:
privacyguy123 said:
There is nothing wrong on line 5, that is not helping in understanding the problem.
Click to expand...
Read my edit to the previous post. My guess is your error is some where inside the last sections.

Code: 
log:
  file: ""
  max_backups: 0
  max_size: 100
  max_age: 3
  compress: false
  local_time: false
  verbose: false
os:
  group: ""
  user: ""
  rlimit_nofile: 0
schema_version: 27
 
The end of my file looks like this - it's running just fine on the router right now. If the file was "wrong" it wouldn't run at all I would have thought ... The error exists in the updating process somewhere.

log:
file: ""
max_backups: 0
max_size: 100
max_age: 3
compress: false
local_time: false
verbose: false
os:
group: ""
user: ""
rlimit_nofile: 0
schema_version: 27
Click to expand...
 
privacyguy123 said:
The end of my file looks like this - it's running just fine on the router right now. If the file was "wrong" it wouldn't run at all I would have thought ... The error exists in the updating process somewhere.
Click to expand...
You have to have the indent's. Otherwise the .yaml file might improperly formatted in places.

This is a yaml format checker.

YAMLlint - The YAML Validator

Validate, Verify and Reformat your YAML documents, optimized for Ruby on Rails
www.yamllint.com

Run the content of your .yaml file through this.

If everything is good inside your .yaml file you will get this:

1702498587183.png


After you press GO.
 
Last edited:
privacyguy123 said:
The end of my file looks like this - it's running just fine on the router right now. If the file was "wrong" it wouldn't run at all I would have thought ... The error exists in the updating process somewhere.
Click to expand...

This part of the update process exists to tell you if there is bad formatting in your .config file. There is no telling if the bad formatting will "break" AGH from starting. Maybe your AGH starts, but with errors.
 
Status
Not open for further replies.

Similar threads

J
AdGuardHome AdGuardHome stops working after every router reboot - have to un-/reinstall it every time
Replies
0
Views
125
jtbx
J
C
Ad guard fails with mobile devices once Encryption is enabled.
Replies
3
Views
340
Gary_Dexter
Gary_Dexter
G
AdGuardHome AdguardHome install issue
2
Replies
26
Views
1K
thelonelycoder
thelonelycoder
Viktor Jaep
TAILMON TAILMON v1.0.20 -July 27, 2024- WireGuard-based Tailscale Installer, Configurator and Monitor (Now available in AMTM!)
Replies
2
Views
289
Viktor Jaep
Viktor Jaep
SomeWhereOverTheRainBow
  • Locked
AdGuardHome AdGuardHome New Release's 2023
13 14 15
Replies
288
Views
31K
visortgw
visortgw
Similar threads
Thread starter Title Forum Replies Date
thelonelycoder amtm amtm 5.0 - the Asuswrt-Merlin Terminal Menu, November 17, 2024 Asuswrt-Merlin AddOns 61
J Entware Possible to install jdownloader on asuswrt-merlin router with entware?? Asuswrt-Merlin AddOns 9
W Skynet SOLVED: Scrollbar Disappears on Skynet Tab on Asuswrt-Merlin 386.14 Asuswrt-Merlin AddOns 10
thelonelycoder scMerlin scMerlin 2.5.8 - Service and script control menu for Asuswrt-Merlin, October 20, 2024 Asuswrt-Merlin AddOns 85
JGrana uKasa uKasa - A utility script that manages Kasa smart outlets and switches with Asuswrt-Merlin routers Asuswrt-Merlin AddOns 29
JGrana Updated Hue Utility - huetil Control and manage your Hue system from Asuswrt-Merlin or Raspbian Asuswrt-Merlin AddOns 1
8 ASUS RT-AX58U (F/W Ver.:V3.0.0.4.384.8601) with Asuswrt-Merlin 3004.388.5 - Transmission: "Could not connect to the server. You may need to reload" Asuswrt-Merlin AddOns 2
C Entware Channel change with Entware on Merlin Asuswrt-Merlin AddOns 0
R Entware Asus-Merlin 388.8 GT-AX11000 Entware v2RayA package error Asuswrt-Merlin AddOns 2
Tarek Yag vnStat vnStat on Merlin 386.14 missing scrollbar bug Asuswrt-Merlin AddOns 13

Similar threads

Latest threads

Support SNBForums w/ Amazon

If you'd like to support SNBForums, just use this link and buy anything on Amazon. Thanks!

Sign Up For SNBForums Daily Digest

Get an update of what's new every day delivered to your mailbox. Sign up here!

Members online

Total: 891 (members: 41, guests: 850)
Top