Call of Duty Cold War not connect Multiplayer

[ronietl]

I currently have xbox one x connected to my Asus RT-AX88U router with cable, but I can't connect to Call of Duty - Cold War in multiplayer mode, I can only connect to when I disable the firewall and it only works from version 386.1 beta 3. Can anyone help me? I would like not to disable the firewall. This only happens in CoD - Cold War.

 

[L&LD]

As a temporary solution (until Beta 4 or later), can you put your Xbox in the DMZ and have it work? At least the rest of your network will still be firewalled.

 

[S.claus]

Ax88u beta 4b . No issues this side currently in a TDM match on the PS5

 

[Triton]

Cold War uses some servers that Alienvault doesn't like and Skynet blocks most of them.
I did whitelist those ranges to make it work.
Did you use port forwarding too?

 

[Prodeje79]

Change to full cone NAT and boom everything works. I didn't need to do port forwarding or anything else. Two pcs now play COD in open NAT at same time.

On a related note, I had to do an extra reset too. When in doubt, do extra resets, especially after each firmware.

L&LD linked me to these two:

L&LD

www.snbforums.com

Would appreciate Wireless Professional Setting recommendations of AIMesh with AX88U as the root router

Hi, I am a new user. Great community here, very useful, so much knowledge, at times overwhelming but all around a great place! I have been an ASUS router user for as long as I remember, but only recently I went down the Merlin route. My current set-up is as follows: Root/Main Router: A new...

www.snbforums.com

 

[ronietl]

As a temporary solution (until Beta 4 or later), can you put your Xbox in the DMZ and have it work? At least the rest of your network will still be firewalled.

I did that, but it doesn't work...

 

[ronietl]

Cold War uses some servers that Alienvault doesn't like and Skynet blocks most of them.
I did whitelist those ranges to make it work.
Did you use port forwarding too?

Do you have the list of servers? Yes, I released it

 

[ronietl]

Change to full cone NAT and boom everything works. I didn't need to do port forwarding or anything else. Two pcs now play COD in open NAT at same time.

On a related note, I had to do an extra reset too. When in doubt, do extra resets, especially after each firmware.

L&LD linked me to these two:

L&LD

www.snbforums.com

Would appreciate Wireless Professional Setting recommendations of AIMesh with AX88U as the root router

Hi, I am a new user. Great community here, very useful, so much knowledge, at times overwhelming but all around a great place! I have been an ASUS router user for as long as I remember, but only recently I went down the Merlin route. My current set-up is as follows: Root/Main Router: A new...

www.snbforums.com

I use nat fullcone! But doesn’t work

 

[Prodeje79]

I use nat fullcone! But doesn’t work

I had the wolkfpack error or whatever you get too in COD CW.

Had to restart from scratch, extra resets, waiting 10 mins between reboots etc etc....
I did and all started working perfectly.
Start from scratch following those guides/links from LD&D

Then my brand new 86u died, 3 months old. Today just got my replacement from ASUS, about to do this all again today!
Joy!

 

[Triton]

Do you have the list of servers? Yes, I released it

i would have, but deleted CW and the IPs some weeks ago

 

[ronietl]

i would have, but deleted CW and the IPs some weeks ago

Do you know how I can access and delete the servers? Do you have a way to do it?

 

[Prodeje79]

Mine works fine with Skynet, please do the nuke and M&M. This will fix your issues!

 

[Vexira]

I currently have xbox one x connected to my Asus RT-AX88U router with cable, but I can't connect to Call of Duty - Cold War in multiplayer mode, I can only connect to when I disable the firewall and it only works from version 386.1 beta 3. Can anyone help me? I would like not to disable the firewall. This only happens in CoD - Cold War.

did you enable full cone nat in wan it works for me im on xbox one x.
also in the network settings for the xbox hit clear alternative mac address, and try changing the default port number the xbox uses.

 

[creatine]

Maybe the thread I created here might help you. It details allowing upnp for specific devices (you console) for COD

UPNP for 2 devices only

I currently have 2 playstation consoles in my home network behind traditional NAT using Merlin FW. The issues arises with certain multiplayer games (Call of Duty) that require an "OPEN" nat type for proper matchmaking, lobby gameplay, etc. I would like to avoid placing both consoles in the DMZ...

www.snbforums.com

 

[ronietl]

did you enable full cone nat in wan it works for me im on xbox one x.
also in the network settings for the xbox hit clear alternative mac address, and try changing the default port number the xbox uses.

I try this, but don´t work

 

[ronietl]

Mine works fine with Skynet, please do the nuke and M&M. This will fix your issues!

I can try this, but in filter logs the ip address is not visible only ip nat...

 

[ronietl]

In the standard version it also works without disabling the firewall. Can help @RMerlin

 

[Triton]

i just looked at the system log entries for blocked IPs when connecting to the multiplayer and whitelisted them

 

[ubik]

If anyone also has this issue with Skynet whitelist these domains:
stun.us.demonware.net stun.eu.demonware.net

Warzone and Black Ops should then connect again normally.

 

[el pescador]

If anyone also has this issue with Skynet whitelist these domains:
stun.us.demonware.net stun.eu.demonware.net

Warzone and Black Ops should then connect again normally.

Will now re download warzone and try that.
For some reason I could never connect to the local servers. That may be the reason.