DNScrypt dnscrypt installer for asuswrt

[M@rco]

Too bad, hopefully @bigeyes0x0 can fix it soon. Was really hoping it was fixed now. I had to check whether you already updated the script, wasn't sure whether @Protik meant the curent release, or a next one. I can't verify it myself as I'm in UTC, so I don't have the issue you're unfortunately still having.

 

[skeal]

I think I screwed up its not 160 it is 123 America/Regina

 

[skeal]

Nope still no cigar..

 

[M@rco]

Nope still no cigar..

Most likely another redundant question, but did you reboot after the changes you've made?

 

[skeal]

Most likely another redundant question, but did you reboot after the changes you've made?

Yep sure did.

 

[DonnyJohnny]

Mine now become 16hr behind of my time. It is the UTC time equivalent to my GMT+8
I used 2 option in the timezone and both same result.
77 Asia/Singapore
101 Singapore

Feb  3 06:39:18 kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
Feb  2 22:39:19 dnscrypt-proxy[434]: Starting dnscrypt-proxy 2.0.0rc
Feb  2 22:39:19 dnscrypt-proxy[434]: Now listening to 127.0.0.1:65053 [UDP]
Feb  2 22:39:19 dnscrypt-proxy[434]: Now listening to 127.0.0.1:65053 [TCP]
Feb  3 06:39:19 WAN_Connection: WAN was restored.
Feb  3 06:39:20 nat: apply nat rules (/tmp/nat_rules_eth0_eth0)
Feb  3 06:39:21 nat: apply nat rules (/tmp/nat_rules_eth0_eth0)
Feb  2 22:39:22 dnscrypt-proxy[434]: System DNS configuration not usable yet, exceptionally resolving [dns.google.com] using fallback resolver [8.8.8.8:53]
Feb  2 22:39:22 dnscrypt-proxy[434]: [google] OK (DoH) - rtt: 5ms
Feb  2 22:39:22 dnscrypt-proxy[434]: Server with the lowest initial latency: google (rtt: 5ms)
Feb  2 22:39:22 dnscrypt-proxy[434]: dnscrypt-proxy is ready - live servers: 1
Feb  3 06:39:22 ntp: start NTP update

4hrs later, it back to normal, 8hour behind me... I am GMT+8

Feb  3 11:00:14 Skynet: [Complete] 227237 IPs / 6479 Ranges Banned. 0 New IPs / 0 New Ranges Banned. 195 Inbound / 60 Outbound Connections Blocked! [14s]
Feb  3 03:00:22 dnscrypt-proxy[434]: Server with the lowest initial latency: google (rtt: 5ms)

In my /etc, there is a file TZ. Inside is GMT-8. I wonder how is this generated. Could it have effect on all these?

 

[bigeyes0x0]

That TZ file is generated by the firmware not me, and the format to write GMT+8 is GMT-8, for actual -8, it would be GMT8.

I generate the /etc/localtime point to a binary file generate from https://data.iana.org/time-zones/tz-link.html .

For the actual problem you guys are having, I actually don't have it, so I'm looking into it but I can't promise anything .

 

[DonnyJohnny]

That TZ file is generated by the firmware not me, and the format to write GMT+8 is GMT-8, for actual -8, it would be GMT8.

I generate the /etc/localtime point to a binary file generate from https://data.iana.org/time-zones/tz-link.html .

For the actual problem you guys are having, I actually don't have it, so I'm looking into it but I can't promise anything .

Small issue, thx for looking into it. Later when I have ttime I will try select other gmt+8 country to see.

By the way, the log time changed from 16 hr different after boot up and become 8hr different after sometime. So I think the time zone don't seems to stick too.

 

[glehel]

if I start manually I set the time well.

 

[glehel]

Feb 3 07:06:53 dnscrypt-proxy[1113]: Stopped.
Feb 3 08:06:53 admin: Start dnscrypt-proxy
Feb 3 08:06:53 dnscrypt-proxy[16102]: Source [http://download.dnscrypt.info/resolvers-list/v2/public-resolvers.md] loaded
Feb 3 08:06:53 dnscrypt-proxy[16102]: Starting dnscrypt-proxy 2.0.0rc
Feb 3 08:06:53 dnscrypt-proxy[16102]: Now listening to 127.0.0.1:65053 [UDP]
Feb 3 08:06:53 dnscrypt-proxy[16102]: Now listening to 127.0.0.1:65053 [TCP]
Feb 3 08:06:53 dnscrypt-proxy[16102]: [securedns] OK (crypto v1) - rtt: 32ms
Feb 3 08:06:53 dnscrypt-proxy[16102]: [soltysiak] OK (crypto v1) - rtt: 38ms
Feb 3 08:06:54 dnscrypt-proxy[16102]: [google] OK (DoH) - rtt: 104ms
Feb 3 08:06:54 dnscrypt-proxy[16102]: Server with the lowest initial latency: securedns (rtt: 32ms)
Feb 3 08:06:54 dnscrypt-proxy[16102]: dnscrypt-proxy is ready - live servers: 3
Feb 3 08:13:06 dropbear[16658]: Password auth succeeded for 'admin' from 192.168.1.106:45419

 

[GoNz0]

I updated my router to 384.3_alpha3-g0462c71 & still no joy, I get the opendns landing page if I click through straight after reboot then it vanishes. Any ideas?

 

[M@rco]

I updated my router to 384.3_alpha3-g0462c71 & still no joy, I get the opendns landing page if I click through straight after reboot then it vanishes. Any ideas?

Not sure what's the issue? Are you having trouble with dnscrypt?

 

[GoNz0]

Not sure what's the issue? Are you having trouble with dnscrypt?

Yes it doesn't work basically. I was on the 382 branch but that was buggy so I left it until I updated to 384 alpha.
It installs fine, reboot and I get less than a minute being able to get https://welcome.opendns.com/ without the oops on the end.
nslookup -type=txt debug.opendns.com returns *** Router can't find debug.opendns.com: Non-existent domain

I do a standard setup, picking cisco server (9), divert all dns traffic through crypt and setup my opendns account user and pass.

Not sure if I am doing something wrong for it to pack up soon after boot?

*edit, this is the same on the original or the V2 of this script.

C:\Windows\system32>nslookup -type=txt debug.opendns.com
Server:  Router
Address:  192.168.1.1
Non-authoritative answer:
debug.opendns.com       text =
        "server m21.lon"
debug.opendns.com       text =
        "flags 20 0 8050 3950000000000000000"
debug.opendns.com       text =
        "originid 19592237"
debug.opendns.com       text =
        "actype 2"
debug.opendns.com       text =
        "bundle 5670731"
debug.opendns.com       text =
        "source 82.1.22.110:49597"
debug.opendns.com       text =
        "dnscrypt enabled (713156774457306E)"
(root)  ??? unknown type 41 ???
C:\Windows\system32>nslookup -type=txt debug.opendns.com
Server:  Router
Address:  192.168.1.1
*** Router can't find debug.opendns.com: Non-existent domain

 

[M@rco]

@GoNz0 Are you using the latest version of the installer script?

 

[GoNz0]

@GoNz0 Are you using the latest version of the installer script?

Yes from the 1st part in this thread, tried the old as well.

Sent from my SM-G920F using Tapatalk

 

[M@rco]

If you mean the first post, that is the old installer. The new installer script, which currently installs dnscrypt-proxy v2.0.0 rc, can be found in the post I linked in my previous message.

 

[GoNz0]

Yes I tried the beta script as well, same result.

With the beta I get this

Feb  4 15:18:02 dnscrypt-proxy[534]: Source [https://download.dnscrypt.info/resolvers-list/v2/public-resolvers.md] loaded
Feb  4 15:18:02 dnscrypt-proxy[534]: Starting dnscrypt-proxy 2.0.0rc3
Feb  4 15:18:02 dnscrypt-proxy[534]: Now listening to 127.0.0.1:65053 [UDP]
Feb  4 15:18:02 dnscrypt-proxy[534]: Now listening to 127.0.0.1:65053 [TCP]
Feb  4 15:18:03 dnscrypt-proxy[534]: [cisco] OK (crypto v1) - rtt: 26ms
Feb  4 15:18:03 dnscrypt-proxy[534]: Server with the lowest initial latency: cisco (rtt: 26ms)
Feb  4 15:18:03 dnscrypt-proxy[534]: dnscrypt-proxy is ready - live servers: 1

But as before within seconds it stops working.

I had reset the router and restored using the backup/restore script as well to make sure.

 

[M@rco]

I haven't read about anyone with the same issue so far. As this appears to be the latest rc, you might want to open an issue at the developers Github page.

 

[bigeyes0x0]

No not a problem with Frank more like @GoNz0's router environment.
What is your client DNS settings, router IP only? From DHCP?

 

[GoNz0]

No not a problem with Frank more like @GoNz0's router environment.
What is your client DNS settings, router IP only? From DHCP?

Router handles dns m8, all fields left blank. Happens to all devices i use such as PC, laptop and server. All set to dhcp but the router gives the same ip to them via dhcp tables.

Sent from my SM-G920F using Tapatalk