Entware-arm - synced with Entware (mips) 2015.09

TeHashX · Feb 12, 2015

Rankdropper84 said:
All the packages I install are being downloaded to my SD card correct?

Yes, in entware.arm directory

cosmoxl · Feb 12, 2015

zyxmon said:
cosmoxl Entware cannot coexist with Optware.

OK, thanks!

Rankdropper84 · Feb 14, 2015

Has anyone had any success install lighttpd?

zyxmon · Feb 14, 2015

Rankdropper84 said:
Has anyone had any success install lighttpd?

I have just tested it. It works. You need to edit lighttpd.conf file and specify server.port and create index.html at server.document-root.

Rankdropper84 · Feb 14, 2015

zyxmon said:
I have just tested it. It works. You need to edit lighttpd.conf file and specify server.port and create index.html at server.document-root.

I appreciate the response. If possible could you walk me through this a little more? More specifically how I create the document. I appreciate you taking the time to help me!

Rankdropper84 · Feb 14, 2015

If you could give me the syntaxs that would be most appreciated. I am fairly new to all this but am trying to learn.

zyxmon · Feb 14, 2015

1. lighttpd.conf file is located in the folder /opt/etc/lighttpd
Use you favorite text editor - nano, joe, vim to edit it.
2. There are a lot of html examples in the internet.
You can use the following index.html to check:

Code:

<html>
<head>
<title>Welcome to nginx!</title>
</head>
<body bgcolor="white" text="black">
<center><h1>Welcome to nginx!</h1></center>
</body>
</html>

Rankdropper84 · Feb 14, 2015

zyxmon said:
1. lighttpd.conf file is located in the folder /opt/etc/lighttpd
Use you favorite text editor - nano, joe, vim to edit it.
2. There are a lot of html examples in the internet.
You can use the following index.html to check:

Code:

<html> <head> <title>Welcome to nginx!</title> </head> <body bgcolor="white" text="black"> <center><h1>Welcome to nginx!</h1></center> </body> </html>

I feel really stupid trying to get this going. Which conf file should i edit? I added #server.port=81 to the lighttpd.conf-opkg config file. Where would I add the html code to? Would i navigate to the /opt/share directory then nano into the "www" directory and input my code there?

I think my main problem is setting a default document.

TeHashX · Feb 14, 2015

This guide should work fine https://www.asuswrt.eu/lighttpd-web-server-with-php-support-through-entware/

Rankdropper84 · Feb 14, 2015

TeHashX said:
This guide should work fine https://www.asuswrt.eu/lighttpd-web-server-with-php-support-through-entware/

I have literally followed that guide a couple times now. I wonder if I just need to reinstall everything and start fresh?

When entering the command lighttpd -f /opt/etc/lighttpd/lighttpd.conf I get these two entries in return.

(configfile.c.1272) a default document-root has to be set

(server.c.649) setting default values failed

zyxmon · Feb 14, 2015

TeHashX said:
This guide should work fine https://www.asuswrt.eu/lighttpd-web-server-with-php-support-through-entware/

This guide needs some editing. Now lighttpd modules are added automatically to lighttpd.conf
lighttpd will complain that

Code:

2015-02-14 08:28:53: (plugin.c.131) Cannot load plugin mod_scgi more than once, please fix your config (we may not accept such configs in future releases
2015-02-14 08:28:53: (plugin.c.131) Cannot load plugin mod_fastcgi more than once, please fix your config (we may not accept such configs in future releases

TeHashX · Feb 14, 2015

Rankdropper84 said:
I have literally followed that guide a couple times now. I wonder if I just need to reinstall everything and start fresh?

When entering the command lighttpd -f /opt/etc/lighttpd/lighttpd.conf I get these two entries in return.

(configfile.c.1272) a default document-root has to be set

(server.c.649) setting default values failed

Don't have to reinstall

Code:

/opt/etc/init.d/S80lighttpd stop
rm /opt/etc/lighttpd/conf.d/*
wget -c -O /opt/etc/lighttpd/conf.d/99-rtorrent-fastcgi-scgi-auth.conf http://goo.gl/YK8xPQ
wget -c -O /opt/share/www/index.html http://goo.gl/ZPEv73
/opt/etc/init.d/S80lighttpd start

zyxmon said:
This guide needs some editing. Now lighttpd modules are added automatically to lighttpd.conf
lighttpd will complain that

Code:

2015-02-14 08:28:53: (plugin.c.131) Cannot load plugin mod_scgi more than once, please fix your config (we may not accept such configs in future releases 2015-02-14 08:28:53: (plugin.c.131) Cannot load plugin mod_fastcgi more than once, please fix your config (we may not accept such configs in future releases

Same on mipsel version but it works

zyxmon · Feb 14, 2015

TeHashX said:
Same on mipsel version but it works

Easy to fix by removing appropriate conf files in conf dir. After the 99-rtorrent-fastcgi-scgi-auth.conf is added, mod_scgi and mod_fastcgi confs should be deleted.

TeHashX · Feb 14, 2015

zyxmon said:
Easy to fix by removing appropriate conf files in conf dir. After the 99-rtorrent-fastcgi-scgi-auth.conf is added, mod_scgi and mod_fastcgi confs should be deleted.

Guide updated https://www.asuswrt.eu/lighttpd-web-server-with-php-support-through-entware/

Rankdropper84 · Feb 14, 2015

TeHashX said:
Guide updated https://www.asuswrt.eu/lighttpd-web-server-with-php-support-through-entware/

I got it working with the link you posted. Thanks a ton!. One last question though, where is the html index that I need to edit which will change the look of 192.168.1.1:81?

TeHashX · Feb 14, 2015

Rankdropper84 said:
I got it working with the link you posted. Thanks a ton!. One last question though, where is the html index that I need to edit which will change the look of 192.168.1.1:81?

If you look just a little bit, you will see where the index.html is

Code:

wget -c -O [B]/opt/share/www/index.html[/B] http://goo.gl/ZPEv73

Rankdropper84 · Feb 14, 2015

TeHashX said:
If you look just a little bit, you will see where the index.html is

Code:

wget -c -O [B]/opt/share/www/index.html[/B] http://goo.gl/ZPEv73

I found it but everytime I modify the index.html I either get a broken webpage or it just doesn't seem to work since the default "congratulations" webpage will still pop up. It works fine when I modify the index.html in ubuntu but I cannot figure out how to get my own html code to stick. I appreciate you bearing with me. I would "thank" you again on here but it says I need to spread thanks around first haha

TeHashX · Feb 14, 2015

Rankdropper84 said:
I found it but everytime I modify the index.html I either get a broken webpage or it just doesn't seem to work since the default "congratulations" webpage will still pop up. It works fine when I modify the index.html in ubuntu but I cannot figure out how to get my own html code to stick. I appreciate you bearing with me. I would "thank" you again on here but it says I need to spread thanks around first haha

You don't have to ask in this thread, here is for entware installation only.
Use comments on site.
Also search on internet how to create a webpage...

Rankdropper84 · Feb 14, 2015

TeHashX said:
You don't have to ask in this thread, here is for entware installation only.
Use comments on site.
Also search on internet how to create a webpage...

Your not understanding me. I know how to create a simple webpage. I just cannot get my HTML code to actually work. You would think I didn't even paste my HTML code into it. I have no problem having lighttpd work using ubuntu. I think maybe I am editing the wrong index.HTML or something.

Either way I guess I'll just make a thread about it or something.

ekrboi · Feb 14, 2015

Wow!, I know I'm a little late but this is awesome news. I miss entware from my ac66! Optware just pales in comparison of what is available. I've had to compile some stuff for arm I used from entware in the past.

I'm not going to go through the hassle of changing over to entware just yet but I will bite the bullet and redo everything on the next FW update if everything for entware looks good.

I'm a little confused after reading through the pages.. are people having issues or not? Most who have mentioned issues also mention a swap partition and I'm not running a swap since it has never seemed necessary with the "minor" router hacking I've done. I forward most things other than DNScrypt and knockd over to my home server to handle.

Thread starter	Title	Forum	Replies	Date
A	Malfunctioning AX86U Pro? WiFi Radio Fail, Trouble Ejecting/Mounting Entware USB	Asuswrt-Merlin	2	Yesterday at 6:07 PM
M	AC68U - RTL2832U and Entware	Asuswrt-Merlin	5	Aug 31, 2024
W	Question: About AX4200 regarding SSH support and Entware	Asuswrt-Merlin	23	Jul 8, 2024
D	How would you go about syncing/symlinking root home folder to entware drive during system operation?	Asuswrt-Merlin	12	Apr 5, 2024
J	Low-Power SSD for amtm, Diversion, Entware and Tailscale on the USB 2.0 Port (USB 3.0 configured as USB 2.0)	Asuswrt-Merlin	130	Jan 29, 2024
J	Format required for external drive with scripts + entware?	Asuswrt-Merlin	7	Jan 10, 2024
C	Entware doesn't get mounted after reboot on DSL-AC68U	Asuswrt-Merlin	0	Jan 10, 2024

Entware-arm - synced with Entware (mips) 2015.09

Very Senior Member

Senior Member

Regular Contributor

Regular Contributor

Regular Contributor

Regular Contributor

Regular Contributor

Regular Contributor

Very Senior Member

Regular Contributor

Regular Contributor

Very Senior Member

Regular Contributor

Very Senior Member

Regular Contributor

Very Senior Member

Regular Contributor

Very Senior Member

Regular Contributor

New Around Here

Similar threads

Similar threads

Support SNBForums w/ Amazon

Sign Up For SNBForums Daily Digest