Menu
What's new
By:
Filters Better Search

Phicomm K3C AC1900 MU-MIMO Gigabit Router Reviewed

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

Status
Not open for further replies.
There is also a matching toaster!
jigglywiggly said:
Anyone have the latest firmware for the k3c? The link on the website does not finish downloading for me and is very slow. SW_K3C_703004848_V33.1.33.197.bin is the file name if it is in your downloads folder

EDIT: It finally finished, if anyone else needs it I rehosted it

https://drive.google.com/open?id=1TQg-Q5oe2HpBWhMVSY7xqGDlRRZ8pxLQ
Click to expand...
They don't do firmware updates since March 2018. But, There is also a matching toaster! : https://gizmodo.com/the-toaster-that-longed-to-be-a-vcr-5139135
 
they still haven't updated firmware, so I wouldn't recommend buying it if you want to plug it into the internet, unless you want to download the custom firmware from the Chinese message board.
 
jdmc said:
Okay, but then why does this router still show up as the #3 Overall highest-rated router on SmallNetBuilder?! That makes no sense.
Click to expand...
The ratings are based on performance only. You also have to look at the date of review. We also have paused reviews since about a year ago.
Phicomm tested the U.S. market by introducing a few products. They decided they didn't want to stay in the market.

As others have noted in the thread, if you are ok with having no support other than what you can dig up, then it's your money.
 
Interesting... When I tried to use the k3c as an AP it would get screwed up, it was like it was still trying to assign dhcp up addresses. Did you see any problem like that or devise a fix?
 
Easy Rhino said:
Interesting... When I tried to use the k3c as an AP it would get screwed up, it was like it was still trying to assign dhcp up addresses. Did you see any problem like that or devise a fix?
Click to expand...
assign dhcp range to itself, like a guy above said. if you assigned it to 192.168.1.2, just assign range to 192.168.1.2 to 192.168.1.2 . or use static ip settings. more keypresses
 
huh, so it would try to grant a IP address to other devices, fail, and then my real dhcp server in my router would be able to respond with the real IP address?
 
thiggins said:
The ratings are based on performance only. You also have to look at the date of review. We also have paused reviews since about a year ago.
Phicomm tested the U.S. market by introducing a few products. They decided they didn't want to stay in the market.

As others have noted in the thread, if you are ok with having no support other than what you can dig up, then it's your money.
Click to expand...

May I suggest adding a small update note at the top of the review stating these caveats? I bought one of these on Amazon for $38.74 back in May of last year based on your review. It would've been nice to know that it hasn't received firmware updates in a while and that PHICOMM pretty much pulled out of the US market so you'll get no support.

Also if I may ask, why have router reviews paused?
 
thiggins said:
Ran a capture for about 3 hours while running normal traffic through the Phicomm. Capture was filtered in Wireshark for ether host 2c:b2:1a:e0:92:02, which is the Phicomm's WAN port.

The only unusual activity was regular pings to qq.com, Tencent's instant messaging service and occasional HTTP Gets to ip.cn and ip.taobao.com.

Both gets appear to be trying to do IP address lookups, but no IP address is submitted.

ip.cn responds with a Cloudflare block and ip.taobao.com responds with this JSON:
{"code":0,"data":{"ip":"","country":"","area":"","region":"","city":"","county":"","isp":"","country_id":"","area_id":"","region_id":"","city_id":"","county_id":"","isp_id":""}}

There is no reason for the router to be doing this. But it's not harmful.
Click to expand...
Tim,
can this be a 'mischief' point of entry/or collection at a future date? That is, can Phicomm at a later date change the properties and create a collection or capture of info you'd prefer them not to have?

( just thinking out loud)


thanks!
 
frankhere said:
Tim,
can this be a 'mischief' point of entry/or collection at a future date? That is, can Phicomm at a later date change the properties and create a collection or capture of info you'd prefer them not to have?
Click to expand...
Sure, it's possible.
 
jigglywiggly said:
Anyone have the latest firmware for the k3c? The link on the website does not finish downloading for me and is very slow. SW_K3C_703004848_V33.1.33.197.bin is the file name if it is in your downloads folder

EDIT: It finally finished, if anyone else needs it I rehosted it

https://drive.google.com/open?id=1TQg-Q5oe2HpBWhMVSY7xqGDlRRZ8pxLQ
Click to expand...

Hi, Do you still keep the firmware file?

The google drive link has been invalid.

I want to download the file but the website of phicomm has been unreachable.

Could you update the link?
MUCH MUCH THX!
 
Status
Not open for further replies.

Similar threads

alessio89g
WiFi 6 disabled?
Replies
5
Views
583
alessio89g
alessio89g
N
WiFi 5 to 7 Router Upgrade Questions
Replies
4
Views
398
bbunge
bbunge
C
GT-BE98 Pro: 40,000+ ms ping using Wi-Fi 7 despite 4 Gbps up & down
Replies
8
Views
1K
Ceejus
C
SubGothius
Wifi router specs affecting congestion
Replies
5
Views
922
coxhaus
C
X
Upgrade from AC66U to maximize NAS performance
Replies
3
Views
386
Tech9
Tech9

Latest threads

Support SNBForums w/ Amazon

If you'd like to support SNBForums, just use this link and buy anything on Amazon. Thanks!

Sign Up For SNBForums Daily Digest

Get an update of what's new every day delivered to your mailbox. Sign up here!

Members online

Total: 693 (members: 27, guests: 666)
Top