Nope, it's in /tmp/syslog.log so its in the RAM portion.
E:Option ==> 8
Peers (Auto start: Auto=P - Policy, Auto=S - Site-to-Site)
Server Auto Subnet Port Annotate
wg21 Y 10.50.1.1/24 51820 # RT-AX68U Server #1
wg22 S 10.9.8.1/32 61820 # - 192.168.50.0/24
Peers (Auto=X - External i.e. Cell/Mobile/Site)
Device Auto IP DNS Allowed IPs Annotate
Cabin X 10.9.8.2/32 10.9.8.1/32, 192.168.50.0/24 # Site-to-Site LAN 19E:Option ==> 8 Cabin auto=S
***ERROR 'device' Peer 'Cabin' does not support 'auto=S'
Only
wg_manager 'server' Peers can have auto=s (means always listen for unsolicited inbound site-connection requests @ BOOT etc.)auto=s to always listen @ BOOT for site-connection requests from the Home site.
Many thanks for the following WebUI bug report.
e = Exit Script [?]
E:Option ==> uf devls -l /jffs/addons/wireguard/admin@asusAX68U:/tmp/home/root# ls -l /jffs/addons/wireguard/
-rw-rw-rw- 1 admin root 11638 Aug 1 10:53 Help.md
-rw-rw-rw- 1 admin root 72 Aug 1 10:53 UDP_Updater.md5
-rwxrwxrwx 1 admin root 4219 Aug 1 10:52 UDP_Updater.sh
-rw-rw-rw- 1 admin root 3861 Jul 30 20:47 WireguardVPN.conf
-rw-rw-rw- 1 admin root 42 Aug 1 10:53 config.htm
-rw-rw-rw- 1 admin root 79 Aug 1 10:53 wg_ChkEndpointDDNS.md5
-rwxrwxrwx 1 admin root 8456 Aug 1 10:52 wg_ChkEndpointDDNS.sh
-rwxrwxrwx 1 admin root 71042 Aug 1 10:52 wg_client
-rw-rw-rw- 1 admin root 67 Aug 1 10:53 wg_client.md5
-rw-rw-rw- 1 admin root 62444 Aug 1 10:53 wg_manager.asp
-rw-rw-rw- 1 admin root 71 Aug 1 10:53 wg_manager.md5
-rwxrwxrwx 1 admin root 445089 Aug 1 10:52 wg_manager.sh
-rwxrwxrwx 1 admin root 33883 Aug 1 10:52 wg_server
-rw-rw-rw- 1 admin root 67 Aug 1 10:53 wg_server.md5
-rw-rw-rw- 1 admin root 68 Aug 1 10:53 wgmExpo.md5
-rwxrwxrwx 1 admin root 3508 Aug 1 10:53 wgmExpo.sh
-rw-rw-rw- 1 admin root 36 Aug 1 10:53 www-installed.md5Well the 'missing' files now seem to be intact......presumably there were no errors reported when executing
uf devIf you decide not to use
wg_manager, i.e. you opt to use wg-quick instead, then you would have to decide how/when you would issue wg-quick up xxxx for each of your WireGuard interfaces.auto= flag is a convenient method used by wg_manager to selectively control the UP state of the defined WireGuard interfaces (on an individual basis) during the BOOT processwgm start is issued rather than controlling the auto-reconnect (WireGuard is a routing protocol)I've heard this before, recently:
/jffs/addons/wireguard/wg_firewall # WireguardNope, it still reported files as missing
Can you issue:Nope, it still reported files as missing
e = Exit Script [?]
E:Option ==> debuge = Exit Script [?]
E:Debug mode enabledOption ==> ?e = Exit Script [?]
E:Debug mode enabledOption ==> debug....and risk the wrath/ire of some zealot?
RT-AX86U WAN_Connection: WAN(0) link down.
RT-AX86U WAN_Connection: WAN(0) link up.
RT-AX86U rc_service: wanduck 1442:notify_rc restart_wan_if 0
RT-AX86U custom_script: Running /jffs/scripts/service-event (args: restart wan_if)
RT-AX86U custom_script: Running /jffs/scripts/wan-event (args: 0 stopping)
RT-AX86U (wan-event): 29846 Script not defined for wan-event: wan0-stopping
RT-AX86U custom_script: Running /jffs/scripts/wan-event (args: 0 disconnected)
RT-AX86U dnsmasq[3930]: read /etc /hosts - 11 addresses
RT-AX86U dnsmasq[3930]: using nameserver 192.168.0.1#53 for domain Home
RT-AX86U dnsmasq[3930]: using nameserver 192.168.0.1#53
RT-AX86U (wan-event): 29873 Script not defined for wan-event: wan0-disconnected
RT-AX86U custom_script: Running /jffs/scripts/wan-event (args: 0 stopped)
RT-AX86U custom_script: Running /jffs/scripts/wan-event (args: 0 stopped)
RT-AX86U (wan-event): 29881 Script not defined for wan-event: wan0-stopped
RT-AX86U (wan-event): 29886 Script not defined for wan-event: wan0-stopped
RT-AX86U 6relayd[3398]: Termination requested by signal.
RT-AX86U custom_script: Running /jffs/scripts/wan-event (args: 0 init)
RT-AX86U custom_script: Running /jffs/scripts/wan-event (args: 0 connecting)
RT-AX86U (wan-event): 29939 Script not defined for wan-event: wan0-init
RT-AX86U custom_script: Running /jffs/scripts/service-event-end (args: restart wan_if)
RT-AX86U (wan-event): 29946 Script not defined for wan-event: wan0-connecting
RT-AX86U custom_script: Running /jffs/scripts/wan-event (args: 0 disconnected)
RT-AX86U dnsmasq[3930]: read /etc /hosts - 11 addresses
RT-AX86U custom_script: Running /jffs/scripts/wan-event (args: 0 stopped)
RT-AX86U (wan-event): 29958 Script not defined for wan-event: wan0-disconnected
RT-AX86U (wan-event): 29960 Script not defined for wan-event: wan0-stopped
RT-AX86U rc_service: udhcpc_wan 29982:notify_rc start_rdisc6
RT-AX86U rc_service: udhcpc_wan 29982:notify_rc start_dhcp6c
RT-AX86U rc_service: waitting "start_rdisc6" via udhcpc_wan ...
RT-AX86U custom_script: Running /jffs/scripts/service-event (args: start rdisc6)
RT-AX86U custom_script: Running /jffs/scripts/service-event-end (args: start rdisc6)
RT-AX86U custom_script: Running /jffs/scripts/wan-event (args: 0 connected)
RT-AX86U custom_script: Running /jffs/scripts/service-event (args: start dhcp6c)
RT-AX86U (wan-event): 30025 Script not defined for wan-event: wan0-connected
RT-AX86U custom_script: Running /jffs/scripts/service-event-end (args: start dhcp6c)
RT-AX86U custom_script: Running /jffs/scripts/firewall-start (args: eth0)
RT-AX86U dnsmasq[3930]: read /etc /hosts - 11 addresses
RT-AX86U dnsmasq[3930]: using nameserver 192.168.0.1#53 for domain Home
RT-AX86U dnsmasq[3930]: using nameserver 192.168.0.1#53
RT-AX86U (wg_firewall): 30091 Checking if WireGuard® VPN Peer KILL-Switch is required.....
RT-AX86U (wg_firewall): 30091 Restarting WireGuard® to reinstate RPDB/firewall rules
RT-AX86U wan: finish adding multi routes
RT-AX86U miniupnpd[3840]: shutting down MiniUPnPd
RT-AX86U (wg_manager.sh): 30122 v4.19b2 Requesting WireGuard® VPN Peer stop (wg14 wg21)
RT-AX86U (wg_manager.sh): 30122 v4.19b2 Requesting termination of WireGuard® VPN 'server' Peer ('wg21')
RT-AX86U WAN_Connection: WAN was restored.
RT-AX86U dnsmasq[3930]: read /etc /hosts - 11 addresses
RT-AX86U dnsmasq[3930]: using nameserver 192.168.0.1#53 for domain Home
RT-AX86U dnsmasq[3930]: using nameserver 192.168.0.1#53
RT-AX86U wg_manager-serverwg21: WireGuard® VPN 'server' Peer (wg21) on 10.50.1.1:51820 Terminated
RT-AX86U (wg_manager.sh): 30122 v4.19b2 Requesting termination of WireGuard® VPN 'client' Peer ('wg14')
RT-AX86U (wg_manager.sh): 30122 wg14:[97m transfer: 253.64 MiB received, 141.21 MiB sent [97m0 Days, 17:52:38 since [92mSun Jul 31 19:00:18 2022[0m >>>>>>[91m Mon Aug 1 12:52:56 2022 [0m
RT-AX86U (wg_manager.sh): 30122 wg14: period : 22.30 MiB received, 8.94 MiB sent (Rx=23383245;Tx=9374269)
RT-AX86U wg_manager-clientwg14: WireGuard® VPN 'client' Peer (wg14) to 146.70.51.98:1443 (# TorGuard USA, Miami) Terminated
RT-AX86U (wg_manager.sh): 31324 v4.19b2 Requesting WireGuard® VPN Peer start (wg11 wg14 wg21)
RT-AX86U (wg_manager.sh): 31324 v4.19b2 Initialising Wireguard® VPN 'server' Peer (wg21)
RT-AX86U wg_manager-serverwg21: Initialising WireGuard® VPN (IPv6) [2a02:c7e:3f0b:e800:3e7c:3fff:fe6c:22b0] 'Server' Peer (wg21) on 10.50.1.1:51820
RT-AX86U wg_manager-serverwg21: Initialisation complete.
RT-AX86U (wg_manager.sh): 31324 v4.19b2 Initialising Wireguard® VPN 'client' Peer (wg11)
RT-AX86U wg_manager-clientwg11: Initialising WireGuard® VPN client Peer (wg11) to 86.106.143.93:51820 (# Mullvad USA, New York)
RT-AX86U miniupnpd[578]: HTTP listening on port 43721
RT-AX86U miniupnpd[578]: Listening for NAT-PMP/PCP traffic on port 5351
RT-AX86U rc_service: udhcpc_wan 29982:notify_rc stop_samba
RT-AX86U rc_service: udhcpc_wan 29982:notify_rc start_samba
RT-AX86U rc_service: waitting "stop_samba" via udhcpc_wan ...
RT-AX86U custom_script: Running /jffs/scripts/service-event (args: stop samba)
RT-AX86U wsdd2[3955]: Terminated received.
RT-AX86U wsdd2[3955]: terminating.
RT-AX86U wg_manager-clientwg11: Initialisation complete.
RT-AX86U Samba_Server: smb daemon is stopped
RT-AX86U custom_script: Running /jffs/scripts/service-event-end (args: stop samba)
RT-AX86U miniupnpd[578]: private/reserved address 192.168.0.48 is not suitable for external IP
RT-AX86U (wg_manager.sh): 31324 v4.19b2 Initialising Wireguard® VPN 'client' Peer (wg14)
RT-AX86U wg_manager-clientwg14: Initialising WireGuard® VPN client Peer (wg14) to 146.70.51.98:1443 (# TorGuard USA, Miami)
RT-AX86U dhcp_client: bound 192.168.0.48/255.255.255.0 via 192.168.0.1 for 86400 seconds.
RT-AX86U custom_script: Running /jffs/scripts/service-event (args: start samba)
RT-AX86U dnsmasq[3930]: exiting on receipt of SIGTERM
RT-AX86U custom_config: Appending content of /jffs/configs/dnsmasq.conf.add.
RT-AX86U custom_script: Running /jffs/scripts/dnsmasq.postconf (args: /etc/dnsmasq.conf)
RT-AX86U dnsmasq[961]: started, version 2.85 cachesize 1500
RT-AX86U dnsmasq[961]: compile time options: IPv6 GNU-getopt no-RTC no-DBus no-UBus no-i18n no-IDN DHCP DHCPv6 no-Lua TFTP no-conntrack ipset no-auth cryptohash DNSSEC no-ID loop-detect no-inotify no-dumpfile
RT-AX86U dnsmasq[961]: warning: interface br2 does not currently exist
RT-AX86U dnsmasq[961]: warning: interface br1 does not currently exist
RT-AX86U dnsmasq[961]: warning: interface pptp* does not currently exist
RT-AX86U dnsmasq[961]: asynchronous logging enabled, queue limit is 5 messages
RT-AX86U dnsmasq-dhcp[961]: DHCP, IP range 192.168.102.2 -- 192.168.102.254, lease time 1d
RT-AX86U dnsmasq-dhcp[961]: DHCP, IP range 192.168.101.2 -- 192.168.101.254, lease time 1d
RT-AX86U dnsmasq-dhcp[961]: DHCP, IP range 192.168.55.2 -- 192.168.55.254, lease time 1d
RT-AX86U dnsmasq[961]: read /etc /hosts - 11 addresses
RT-AX86U dnsmasq[961]: using nameserver 192.168.0.1#53 for domain Home
RT-AX86U dnsmasq[961]: using nameserver 192.168.0.1#53
RT-AX86U Samba_Server: daemon is started
RT-AX86U custom_script: Running /jffs/scripts/service-event-end (args: start samba)
RT-AX86U wsdd2[1040]: starting.
RT-AX86U wg_manager-clientwg14: Initialisation complete.E:Debug mode enabledOption ==> ?
+ + sed s/^[ \t]*//;s/[ \t]*$//
printf %s ?
+ menu1=?
+ Validate_User_Choice ?
+ local menu1=?
+ [ Y == Y ]
+ echo ?
+ menu1=?
+ Process_User_Choice ?
+ local menu1=?
+ echo ?
+ awk {print $1}
+ local ACTION=?
+ Show_Info_HDR
+ echo ?
+ awk {print $1}
+ local ACTION=?
+ local CHANGELOG=\e[0m(\e[96mChange Log: \e[93mhttps://github.com/MartineauUK/wireguard/commits/main/wg_manager.sh\e[0m)
+ echo v4.19b2+ grep b
+ [ -n v4.19b2 ]
+ local CHANGELOG=\e[0m(\e[96mChange Log: \e[93mhttps://github.com/MartineauUK/wireguard/commits/dev/wg_manager.sh\e[0m)
+ echo -e \e[97m\n\tRouter\e[95m RT-AX68U \e[0mFirmware \e[95m(v386.7_2)
Router RT-AX68U Firmware (v386.7_2)
+ [ -f /opt/etc/entware_release ]
+ [ -f /opt/etc/entware_release ]
+ grep -E ^arch /opt/etc/entware_release
+ echo -e \e[92m\n\t[✔]\e[97m Entware Architecture\e[95m arch=aarch64\n\e[0m
[✔] Entware Architecture arch=aarch64
+ echo -e \e[95m\n\tv4.19b2\e[97m WireGuard® Session Manager \e[0m(\e[96mChange Log: \e[93mhttps://github.com/MartineauUK/wireguard/commits/dev/wg_manager.sh\e[0m)\e[0m
v4.19b2 WireGuard® Session Manager (Change Log: https://github.com/MartineauUK/wireguard/commits/dev/wg_manager.sh)
+ [ -d /jffs/addons/wireguard/ ]
+ Show_MD5 script
+ local TYPE=script
+ [ script == script ]
+ awk {print $0} /jffs/addons/wireguard/wg_manager.md5
+ echo -e \e[96m\tMD5=3191daf23c180527dbad985ba624d6cc /jffs/addons/wireguard/wg_manager.sh
MD5=3191daf23c180527dbad985ba624d6cc /jffs/addons/wireguard/wg_manager.sh
+ grep+ awk -F" {print $2}
-E ^VERSION= /jffs/addons/wireguard/wg_client
+ local AVERSION=v4.17.9
+ echo -e \e[95m\n\t\tv4.17.9\e[97m (\e[96mwg_client\e[0m)
v4.17.9 (wg_client)
+ grep+ awk -F" {print $2}
-E ^VERSION= /jffs/addons/wireguard/wg_server
+ local AVERSION=v4.17.1
+ echo -e \e[95m\t\tv4.17.1\e[97m (\e[96mwg_server\e[0m)
v4.17.1 (wg_server)
+ Show_Info
+ [ -f /usr/sbin/wg ]
+ modprobe --show-depends wireguard
+ awk {print $2}
+ local FPATH=/lib/modules/4.1.52/kernel/net/wireguard/wireguard.ko
+ strings /lib/modules/4.1.52/kernel/net/wireguard/wireguard.ko
+ cut -d= -f2
+ grep ^version
+ local FVERSION=1.0.20210124
+ which wg
+ [ /usr/sbin/wg != /opt/bin/wg ]
+ echo -e \e[92m\n\t[✔]\e[97m WireGuard® Kernel module/User Space Tools included in Firmware\e[31m (1.0.20210124)\n\e[0m
[✔] WireGuard® Kernel module/User Space Tools included in Firmware (1.0.20210124)
+ which wg
+ [ /usr/sbin/wg == /opt/bin/wg ]
+ [ -f /tmp/menuTree.js ]
+ grep -i WireGuard® Manager /tmp/menuTree.js
+ [ -n {url: "user4.asp", tabName: "WireGuard® Manager"}, ]
+ echo -e \e[92m\n\t[✔]\e[97m WebUI Addon Enabled\e[0m
[✔] WebUI Addon Enabled
+ echo -e \e[0m
+ DNSmasq_Listening_WireGuard_Status
+ grep -F wg* /etc/dnsmasq.conf
+ [ -z interface=wg* # WireGuard ]
+ echo -e \e[92m\t[✔]\e[97m DNSmasq \e[92mis listening on ALL WireGuard® interfaces 'wg*'\n\e[0m
[✔] DNSmasq is listening on ALL WireGuard® interfaces 'wg*'
+ [ -f /jffs/scripts/firewall-start ]
+ grep -i wireguard /jffs/scripts/firewall-start
+ [ -z /jffs/addons/wireguard/wg_firewall # WireGuard ]
+ echo -e \e[92m\t[✔]\e[97m firewall-start \e[92mis monitoring WireGuard® Firewall rules\n\e[0m
[✔] firewall-start is monitoring WireGuard® Firewall rules
+ [ -f /jffs/addons/wireguard/WireguardVPN.conf ]
+ grep -E ^NOMENU /jffs/addons/wireguard/WireguardVPN.conf
+ [ -n ]
+ [ -f /jffs/addons/wireguard/WireguardVPN.conf ]
+ grep -F Y_
+ Manage_KILL_Switch
+ local ACTION=
+ local SILENT=N
+ local TEMP_PERM=temporarily
+ Get_WAN_IF_Name
+ ip route
+ awk /^default/{print $NF}
+ local IF_NAME=eth0
+ nvram get wan0_ifname
+ local IF_NAME=eth0
+ nvram get wan0_gw_ifname
+ [ eth0 != eth0 ]
+ nvram get wan0_pppoe_ifname
+ [ ! -z ]
+ echo eth0
+ local WAN_IF=eth0
+ [ -n ]
+ iptables -nvL+ grep WireGuard KILL-Switch
FORWARD
+ [ -n ]
+ STATUS=N
+ echo N_temporarily
+ echo N_temporarily
+ [ -n ]
+ local TEMP_PERM=temporarily
+ grep -oE ^KILLSWITCH /jffs/addons/wireguard/WireguardVPN.conf
+ [ -z ]
+ local TEMP_PERM=
+ echo -e \e[31m\t[✖]\e[97m WAN \e[92mKILL-Switch is \e[91m\e[7mDISABLED\e[0m (use 'vx' command for info)
[✖] WAN KILL-Switch is DISABLED (use 'vx' command for info)
+ Manage_UDP_Monitor
+ local TYPE=
+ local ACTION=
+ local WATCH=
+ [ -z ]
+ WATCH=&
+ date +%Y%m%d-%H%M%S
+ local TS=20220801-155058
+ [ -n ]
+ pidof UDP_Monitor.sh
+ [ -n ]
+ pidof UDP_Updater.sh
+ [ -n ]
+ echo -e N
+ [ N == Y ]
+ echo -e \e[31m\t[✖]\e[97m UDP \e[92mmonitor is \e[91mDISABLED\e[0m
[✖] UDP monitor is DISABLED
+ Manage_FC ?
+ local STATUS=
+ which fc
+ [ /bin/fc == /bin/fc ]
+ fc status
+ grep Flow Learning Enabled
+ [ -n Flow Learning Enabled : Max<16383>, Active<168>, Cummulative [ 66208 - 66040 ] ]
+ local STATUS=\tFlow Cache Enabled
+ echo \tFlow Cache Enabled
+ local FC_STATUS=\tFlow Cache Enabled
+ echo -e \e[92m\n\t[✔]\e[97m Flow Cache \e[92mis ENABLED\e[0m
[✔] Flow Cache is ENABLED
+ nvram get ipv6_service
+ [ disabled == disabled ]
+ echo -e \e[91m\n\t[✖]\e[97m IPv6 Service is \e[91mDISABLED\e[0m
[✖] IPv6 Service is DISABLED
+ wget -O - -q http://ip4.me/api+ sed s/,Remain.*$//
+ echo -e \e[92m\t[ℹ ] \e[97mIPv4,46.xxx,v1.1,,,See http://ip6.me/docs/ for api documentation
[ℹ ] IPv4,46.xxx,v1.1,,,See http://ip6.me/docs/ for api documentation
+ Get_WAN_IF_Name
+ ip route
+ awk /^default/{print $NF}
+ local IF_NAME=eth0
+ nvram get wan0_ifname
+ local IF_NAME=eth0
+ nvram get wan0_gw_ifname
+ [ eth0 != eth0 ]
+ nvram get wan0_pppoe_ifname
+ [ ! -z ]
+ echo eth0
+ local WAN_IF=eth0
+ cat /proc/sys/net/ipv4/conf/eth0/rp_filter
+ local VAL=1
+ [ 1 == 1 ]
+ STATE=ENABLED
+ echo -e \e[92m\n\t[✔] \e[97mReverse Path Filtering\e[92m ENABLED\n\e[0m
[✔] Reverse Path Filtering ENABLED
+ [ -f /jffs/addons/wireguard/WireguardVPN.conf ]
+ grep -E ^NOTCPMSS /jffs/addons/wireguard/WireguardVPN.conf
+ [ -n ]
+ [ -f /jffs/addons/wireguard/WireguardVPN.conf ]
+ grep -E ^NOSETXMARK /jffs/addons/wireguard/WireguardVPN.conf
+ [ -n ]
+ [ -f /jffs/addons/wireguard/WireguardVPN.conf ]
+ grep -E ^NOIP[Vv]6 /jffs/addons/wireguard/WireguardVPN.conf
+ [ -n ]
+ [ -f /jffs/addons/wireguard/WireguardVPN.conf ]
+ grep -oE USE_ENTWARE_KERNEL_MODULE /jffs/addons/wireguard/WireguardVPN.conf
+ [ -n USE_ENTWARE_KERNEL_MODULE ]
+ [ -f /usr/sbin/wg ]
+ grep -oE ^USE_ENTWARE_KERNEL_MODULE /jffs/addons/wireguard/WireguardVPN.conf
+ [ -n ]
+ echo -e \e[91m\t[✖]\e[97m Use 3rd-party Entware/Userspace Tools \e[92mmodules is \e[91mDENIED\n\e[0m
[✖] Use 3rd-party Entware/Userspace Tools modules is DENIED
+ cru l
+ grep ChkDDNS
+ wc -l
+ [ 0 -gt 0 ]
+ + grep -E wg_manager.*trimdb
cru l
+ wc -l
+ [ 1 -gt 0 ]
+ awk /wg_manager.sh trimdb/ {print $9}
+ cru l
+ + awk /wg_manager.sh trimdb/ {print $1" "$2" "$3" "$4" "$5}
cru l
+ + awk /wg_manager.sh trimdb/ {print $8}
cru l
+ echo -e \e[92m\t[✔] \e[97mCron schedule \e[92m#WireGuard_DB# (0 7 * * 6)\e[97m to trim older than \e[92m99 days\e[97m from WireGuard® SQL Database \e[92mENABLED\n\e[0m
[✔] Cron schedule #WireGuard_DB# (0 7 * * 6) to trim older than 99 days from WireGuard® SQL Database ENABLED
+ [ ReadLine == ReadLine ]
+ echo -e \e[92m\t[✔]\e[97m Use of 'Pg-Up' Key \e[92mfor command retrieval is ENABLED\n\e[0m
[✔] Use of 'Pg-Up' Key for command retrieval is ENABLED
+ Manage_Stats
+ local ACTION=
+ local STATUS=0
+ cru l
+ grep WireGuard
+ [ -n 59 * * * * /jffs/addons/wireguard/wg_manager.sh generatestats #WireGuard#
0 7 * * 6 /jffs/addons/wireguard/wg_manager.sh trimdb 99 #WireGuard_DB# ]
+ local TXT=\e[92m\t[✔] \e[97mStatistics gathering is \e[92mENABLED\e[0m
+ STATUS=1
+ echo -e \e[92m\t[✔] \e[97mStatistics gathering is \e[92mENABLED\e[0m
[✔] Statistics gathering is ENABLED
+ return 1
+ echo -e \e[92m\n\t[ℹ ] \e[0mSpeedtest link\e[93m https://fast.com/en/gb/ \n\e[0m
[ℹ ] Speedtest link https://fast.com/en/gb/
+ echo -e \e[92m\t[ℹ ] \e[0mIPv6 Test link\e[93m https://ipv6-test.com/ \n\e[0m
[ℹ ] IPv6 Test link https://ipv6-test.com/
+ echo -e \e[92m\t[ℹ ] \e[0mWireGuard© Official Site \e[93mhttps://www.wireguard.com/ \n\e[0m
[ℹ ] WireGuard© Official Site https://www.wireguard.com/
+ echo -e \e[92m\t[ℹ ] \e[0m@ZebMcKayhan's\e[92m Hint's and Tips Guide\e[93m https://github.com/ZebMcKayhan/WireguardManager/blob/main/README.md#table-of-content \n\e[0m
[ℹ ] @ZebMcKayhan's Hint's and Tips Guide https://github.com/ZebMcKayhan/WireguardManager/blob/main/README.md#table-of-content
+ [ -f /opt/etc/init.d/S50wireguard ]
+ set +x
WireGuard® ACTIVE Peer Status: Clients 0, Servers 2Interesting... I suppose your fibre media-converter / modem / gateway / whatever also lost power. What if this device boots slower than your router (I know mine is indeed slower)? That would mess up the timing of things (and fits with a previous reported problem).
After dealing with my wife I cant imagine this to be any worse.
If a Site-to-Site configuration say 'Home' to 'Cabin' was successfully created, then the following command should create 'SiteC' and bind it to 'Home'
site2site add Home SiteC lan=172.16.3.3still good, maybe it was just a fluke; I report if (not when) it happens again, i still need to install one breaker i forgot, so we will see how long will I keep putting that of
Thats really cool!
Aug 1 23:09:44 WAN_Connection: WAN was restored.
Aug 1 23:09:46 miniupnpd[13300]: HTTP listening on port 51354
Aug 1 23:09:46 miniupnpd[13300]: Listening for NAT-PMP/PCP traffic on port 5351
Aug 1 23:09:46 rc_service: udhcpc_wan 13106:notify_rc start_vpnclient2
Aug 1 23:09:46 dhcp_client: bound 46.xxx/255.255.255.0 via 46.xxx for 86400 seconds.
Aug 1 23:09:50 kernel: ^[[0;33;41mFCACHEfc_vblog_list_add ERROR: Duplicate blog: list blog<0xffffffc015a61300> JOIN blog<0xffffffc015a8ee40>^[[0m
Aug 1 23:09:50 kernel: ^[[0;33;41mFCACHEfc_vblog_list_add ERROR: Duplicate blog: list blog<0xffffffc015a8ee40> JOIN blog<0xffffffc015aab7c0>^[[0m
Aug 1 23:09:50 kernel: ^[[0;33;41mFCACHEfc_vblog_list_add ERROR: Duplicate blog: list blog<0xffffffc015aab7c0> JOIN blog<0xffffffc015a404c0>^[[0m
Aug 1 23:09:50 kernel: ^[[0;33;41mFCACHEfc_vblog_list_add ERROR: Duplicate blog: list blog<0xffffffc015a404c0> JOIN blog<0xffffffc015a3a980>^[[0m
Aug 1 23:09:52 kernel: blog_link: 17 callbacks suppressed
Aug 1 23:09:52 kernel: blog_link:overwriting ct_p=ffffffc010147970, new_ct=ffffffc010053970 idx=0Aug 1 23:13:01 (wg_manager.sh): 8643 v4.19b2 Requesting WireGuard® VPN Peer restart (wg21 wg22)
Aug 1 23:13:01 (wg_manager.sh): 8643 v4.19b2 Restarting Wireguard® 'server' Peer (wg21)
Aug 1 23:13:01 lldpd[1231]: removal request for address of 10.50.1.1%38, but no knowledge of it
Aug 1 23:13:01 wg_manager-serverwg21: WireGuard® VPN 'server' Peer (wg21) on 10.50.1.1:51820 Terminated
Aug 1 23:13:01 (wg_manager.sh): 8643 v4.19b2 Initialising Wireguard® VPN 'server' Peer (wg21)
Aug 1 23:13:01 wg_manager-serverwg21: Initialising WireGuard® VPN 'Server' Peer (wg21) on 10.50.1.1:51820
Aug 1 23:13:02 wg_manager-serverwg21: Initialisation complete.
Aug 1 23:13:02 (wg_manager.sh): 8643 v4.19b2 Restarting Wireguard® 'server' Peer (wg22)
Aug 1 23:13:02 lldpd[1231]: removal request for address of 10.9.8.1%39, but no knowledge of it
Aug 1 23:13:02 wg_manager-wg22: Executing PostDown: 'iptables -D INPUT -p udp --dport 61820 -j ACCEPT'
Aug 1 23:13:02 wg_manager-wg22: Executing PostDown: 'iptables -D INPUT -i wg22 -j ACCEPT'
Aug 1 23:13:02 wg_manager-wg22: Executing PostDown: 'iptables -D FORWARD -i wg22 -j ACCEPT'
Aug 1 23:13:02 wg_manager-serverwg22: WireGuard® VPN 'server' Peer (wg22) on 10.9.8.1:61820 Terminated
Aug 1 23:13:02 (wg_manager.sh): 8643 v4.19b2 Initialising Wireguard® VPN 'server' Peer (wg22)
Aug 1 23:13:02 wg_manager-serverwg22: Initialising WireGuard® VPN 'Server' Peer (wg22) on 10.9.8.1:61820
Aug 1 23:13:03 wg_manager-wg22: Executing PostUp: 'iptables -I INPUT -p udp --dport 61820 -j ACCEPT'
Aug 1 23:13:03 wg_manager-wg22: Executing PostUp: 'iptables -I INPUT -i wg22 -j ACCEPT'
Aug 1 23:13:03 wg_manager-wg22: Executing PostUp: 'iptables -I FORWARD -i wg22 -j ACCEPT'
Aug 1 23:13:03 wg_manager-serverwg22: Initialisation complete.wgm restart command, perhaps you could try dumping the diagnostics.e = Exit Script [?]
E:Option ==> diagwgm restart to make a comparison of the rules.I wrote this script
github.com
Welcome To SNBForums
SNBForums is a community for anyone who wants to learn about or discuss the latest in wireless routers, network storage and the ins and outs of building and maintaining a small network.
If you'd like to post a question, simply register and have at it!
While you're at it, please check out SmallNetBuilder for product reviews and our famous Router Charts, Ranker and plenty more!
