shooter40sw
Senior Member
Looking forward also to use this with the R66U!
Skynet Skynet - Router Firewall & Security Enhancements
wbennett77
Regular Contributor
Hey Adamm,
Is there a limit to how many addresses can be blocked? I reached 65535 IPs being banned a few days ago and the number has not increased since which doesn't seem right?
Cheers!
Is there a limit to how many addresses can be blocked? I reached 65535 IPs being banned a few days ago and the number has not increased since which doesn't seem right?
Cheers!
Last edited:
Adamm
Part of the Furniture
This is more the likely due to the "maxelem" defaulting at 65535 when not specified. I'll get you the exact syntax when I finish work but you should be able to work it out from here
EDIT;
When creating your IPSets its best to leave this stuff unspecified as IPSet is supposed to dynamically adjust the values, but in this case seeing it isn't you would need to specify the following.
Last edited:
wbennett77
Regular Contributor
How and where would I place this info?
Update: I have two ipset files....ipset.txt and ipset2.txt where ipset.txt is the most recent and includes the whitelist, all the blacklisted ips and countries and ipset2.txt includes the whitelist and blocked ips but not the countries (I only recently added the countries) .
In each file I have the following:
-N Whitelist nethash --hashsize 1024 --probes 4 --resize 50
-N Blacklist iphash --hashsize 298932 --probes 8 --resize 50
-N BlockedCountries nethash --hashsize 298932 --probes 4 --resize 50
Are these the values I need to overwrite and is it normal to have the two ipset files?
I also, in the ipamount file see the magic number 65535.
Thanks!
Last edited:
Adamm
Part of the Furniture
ipset.txt is where each set is saved to every hour. ipset2.txt is a backup of that file every 24 hours.
That being said, the values only need to be replaced in ipset.txt then a reboot should fix your issue (as it will load ipset.txt on boot)
ipamount is just where I store the number of banned IP's for the syslog to reference.
wbennett77
Regular Contributor
Am I supposed to just add the three lines or replace (overwrite) the three current lines?
Thanks!
Thanks!
Adamm
Part of the Furniture
Just overwrite the current lines in the file and IPSet should do the rest of the work for you after a reboot when it loads the file (ipset.txt)
HardCat
Regular Contributor
I have installed the scripts to the correct locations and have checked to ensure they are executable. I am not getting any banned IP's and when I run the script manually
I get the following output:
Output from:
Any ideas as to what I need to change?
Code:
sh /jffs/scripts/firewall-start
Code:
Correct Settings Detected.
[IP Banning Started] ... ... ...
iptables: Bad rule (does a matching rule exist in that chain?).
iptables: Bad rule (does a matching rule exist in that chain?).
iptables: Bad rule (does a matching rule exist in that chain?).
iptables: No chain/target/match by that name.
/opt/bin/firewall: line 145: echo: Argument list too long
Started: Wed Jul 9 07:26:48 DST 2014
Finished: Wed Jul 9 07:26:49 DST 2014
0 IP's currently banned.
Code:
ipset -n -L
Name: Whitelist
Type: nethash
References: 1
Header: hashsize: 1024 probes: 4 resize: 50
Members:
192.168.225.0/24
192.168.1.0/24
Name: Blacklist
Type: iphash
References: 2
Header: hashsize: 1024 probes: 8 resize: 50
Members:
Name: BlockedCountries
Type: nethash
References: 1
Header: hashsize: 1024 probes: 4 resize: 50
Members:This thread is great!
I just setup an AC68U with RMerlin and I want to block all non-us countries. I started looking at IPTables to block all the subnets from IPDeny.com, but its too many rules which will cause bad perf. I was directed to look at ipsets since its supposed to not impact performance.
So I started reading this thread at the first post. Is that first post still the best instructions for this or are there updates?
I am not sure how the country is determined in this method. However it is detected, how often is it updated with most recent subnets?
In the post, it says that this will grab IP's from the syslog and automatically ban them. Did I read that right?
Does this ban individual IP's or subnet ranges?
I would really like to implement this on my AC68U and also my Linux web server. I just want to make sure that I am working with the most accurate process when I start implementing it.
Thanks!
I just setup an AC68U with RMerlin and I want to block all non-us countries. I started looking at IPTables to block all the subnets from IPDeny.com, but its too many rules which will cause bad perf. I was directed to look at ipsets since its supposed to not impact performance.
So I started reading this thread at the first post. Is that first post still the best instructions for this or are there updates?
I am not sure how the country is determined in this method. However it is detected, how often is it updated with most recent subnets?
In the post, it says that this will grab IP's from the syslog and automatically ban them. Did I read that right?
Does this ban individual IP's or subnet ranges?
I would really like to implement this on my AC68U and also my Linux web server. I just want to make sure that I am working with the most accurate process when I start implementing it.
Thanks!
Last edited:
knighthawk
Occasional Visitor
This script looks quite helpful.
Is it still available?
http://198.23.248.102/Public/firewall.sh --> seems to be down or not reachable at the moment. Is there a updated location I missed?
Is it still available?
http://198.23.248.102/Public/firewall.sh --> seems to be down or not reachable at the moment. Is there a updated location I missed?
I just decided to re-set this up on a new router after a massive flood of dropped connections in my syslog from China!
Here is the code, and I am making the assumption Adamm doesn't mind me re-posting his excellent work:
firewall-start
and /opt/bin/firewall
Here is the code, and I am making the assumption Adamm doesn't mind me re-posting his excellent work:
firewall-start
Code:
#!/bin/sh
echo "0 * * * * /tmp/mnt/sda1/asusware.arm/bin/firewall save" > /var/spool/cron/crontabs/admin
echo "0 5 * * * /tmp/mnt/sda1/asusware.arm/bin/firewall backup" >> /var/spool/cron/crontabs/admin
[ -n "`pidof crond`" ] && killall -q crond
sleep 1
crond
sh /tmp/mnt/sda1/asusware.arm/bin/firewalland /opt/bin/firewall
Code:
#!/bin/sh
############################################################
## 17/04/2014 --- RT-AC56U/RT-AC68U Firewall Addition v2.2 #
######################################################################################
### ----- Make Sure To Edit The Following Files ----- #
### /jffs/firewall-start <-- Sets up cronjob/iptables rules #
### /opt/bin/firewall <-- Blacklists IP's From /opt/tmp/ipset.txt #
### /opt/tmp/ipset.txt <-- Banned IP List/IPSet Rules #
######################################################################################
##############################
#####Commands / Variables#####
##############################
UNBANSINGLE="unban" # <-- Remove Single IP From Blacklist
UNBANALL="unbanall" # <-- Unbans All IPs In Blacklist
REMOVEBANS="removeall" # <-- Remove All Entries From Blacklist
SAVEIPSET="save" # <-- Save Blacklists to /opt/tmp/ipset.txt
BANSINGLE="ban" # <-- Adds Entry To Blacklist
BANCOUNTRYSINGLE="country" # <-- Adds entire country to blacklist
BANCOUNTRYLIST="bancountry" # <-- Bans specified countries in this file
WHITELIST="whitelist" # <-- Add IPs from path to Whitelist
BACKUPRULES="backup" # <-- Backup IPSet Rules to /opt/tmp/ipset2.txt / Checks for firmware updates
##############################
started=`date`
bannedips=/opt/tmp/ipamount
cat /opt/bin/firewall | head -23
#########################################################################################
# Unban / Unbanall / Removeall / Save / Ban / Country / Bancountry / Whitelist / Backup #
#########################################################################################
if [ X"$@" = X"$UNBANSINGLE" ]
then
echo "Input IP Address To Unban"
read unbannedip
logger -t Firewall "[Unbanning And Removing $unbannedip From Blacklist] ... ... ..."
ipset -D Blacklist $unbannedip
echo "`sed /$unbannedip/d /opt/tmp/ipset.txt`" > /opt/tmp/ipset.txt
echo "$unbannedip Is Now Unbanned"
elif [ X"$@" = X"$UNBANALL" ]
then
echo "[Unbanning All IP's] ... ... ..."
logger -t Firewall "[Unbanning All IP's] ... ... ..."
ipset --flush Blacklist
ipset --flush BlockedCountries
elif [ X"$@" = X"$REMOVEBANS" ]
then
expr `ipset list | wc -l` - 15 > /opt/tmp/ipamount
echo "[Deleting All `cat $bannedips` Entries From Blacklist] ... ... ..."
logger -t Firewall "[Deleting `cat $bannedips` Entries From Blacklist] ... ... ..."
ipset --flush Blacklist
ipset --flush BlockedCountries
ipset --save > /opt/tmp/ipset.txt
elif [ X"$@" = X"$SAVEIPSET" ]
then
echo "[Saving Blacklists] ... ... ..."
ipset --save > /opt/tmp/ipset.txt
echo "`sed '/crond: USER admin/d' /tmp/syslog.log`" > /tmp/syslog.log
elif [ X"$@" = X"$BANSINGLE" ]
then
echo "Input IP Address"
read bannedip
logger -t Firewall "[Adding $bannedip To Blacklist] ... ... ..."
ipset -q -A Blacklist $bannedip
echo "$bannedip Is Now Banned"
elif [ X"$@" = X"$BANCOUNTRYSINGLE" ]
then
echo "Input Country Abbreviation"
read country
for IP in $(wget -q -O - http://www.ipdeny.com/ipblocks/data/countries/$country.zone)
do
ipset -q -A BlockedCountries $IP
done
elif [ X"$@" = X"$BANCOUNTRYLIST" ]
then
echo "[Banning Spam Countries] ... ... ..."
for country in pk cn in jp ru sa
do
for IP in $(wget -q -O - http://www.ipdeny.com/ipblocks/data/countries/$country.zone)
do
ipset -q -A BlockedCountries $IP
done
done
elif [ X"$@" = X"$WHITELIST" ]
then
echo "Input file location"
read WHITELISTFILE
for IP in `cat $WHITELISTFILE`
do
ipset -q -A Whitelist $IP
echo $IP
done
ipset --save > /opt/tmp/ipset.txt
elif [ X"$@" = X"$BACKUPRULES" ]
then
echo "Backing Up Current IPSet Rules"
cp -f /opt/tmp/ipset.txt /opt/tmp/ipset2.txt
else
if [ X"`nvram get fw_log_x`" = X"drop" ]
then
echo "Correct Settings Detected"
else
nvram set fw_log_x=drop
nvram commit
fi
if [ X"`nvram get fw_enable_x`" = X"1" ]
then
echo "Correct Settings Detected."
else
nvram set fw_enable_x=1
nvram commit
fi
echo "[IP Banning Started] ... ... ..."
logger -t Firewall "[IP Banning Started] ... ... ..."
ipset -q -R < /opt/tmp/ipset.txt
ipset -q -N Whitelist nethash
ipset -q -N Blacklist iphash
ipset -q -N BlockedCountries nethash
iptables -D logdrop -m state --state NEW -j LOG --log-prefix "DROP " --log-tcp-sequence --log-tcp-options --log-ip-options
iptables -D INPUT -m set --match-set Whitelist src -j ACCEPT
iptables -D INPUT -m set --match-set Blacklist src -j DROP
iptables -D INPUT -m set --match-set BlockedCountries src -j DROP
iptables -D logdrop -m state --state NEW -j SET --add-set Blacklist src
iptables -I INPUT -m set --match-set Blacklist src -j DROP
iptables -I INPUT -m set --match-set BlockedCountries src -j DROP
iptables -I INPUT -m set --match-set Whitelist src -j ACCEPT
iptables -I logdrop -m state --state NEW -j SET --add-set Blacklist src
ipset -q -A Whitelist 192.168.1.0/24
ipset -q -A Whitelist `nvram get lan_ipaddr`/24
echo "`sed '/DROP IN=/d' /tmp/syslog.log`" > /tmp/syslog.log
echo "`sed '/DROP IN=/d' /tmp/syslog.log-1`" > /tmp/syslog.log-1
fi
#########
#Logging#
#########
OLDAMOUNT=`cat /opt/tmp/ipamount`
echo "Started: $started"
echo "Finished: `date`"
expr `ipset -L Blacklist | wc -l` - 6 > /opt/tmp/ipamount
NEWAMOUNT=`cat /opt/tmp/ipamount`
echo "`cat $bannedips` IP's currently banned."
logger -t Firewall "[Complete] `cat $bannedips` IPs currently banned. `expr $NEWAMOUNT - $OLDAMOUNT` New IP's Banned. "knighthawk
Occasional Visitor
Sweet, Thanks so much Skirk!
Amateur273
Occasional Visitor
Unknown arg `--match-set'
Asus RT-AC66U v.376.49
admin@kgw:/tmp/mnt/OPTWARE# iptables -V
iptables v1.3.8
admin@kgw:/tmp/mnt/OPTWARE# ipset -V
ipset v4.5, protocol version 4.
Kernel module protocol version 4.
admin@kgw:/tmp/mnt/OPTWARE# iptables -A INPUT -m set --match-set blacklist src -j LOG --log-prefix "DROP blacklist entry: "
iptables v1.3.8: Unknown arg `--match-set'
Try `iptables -h' or 'iptables --help' for more information.
====================
Update: Solved by change "-m set --match-set blacklist" to "-m set --set blacklist"
Asus RT-AC66U v.376.49
admin@kgw:/tmp/mnt/OPTWARE# iptables -V
iptables v1.3.8
admin@kgw:/tmp/mnt/OPTWARE# ipset -V
ipset v4.5, protocol version 4.
Kernel module protocol version 4.
admin@kgw:/tmp/mnt/OPTWARE# iptables -A INPUT -m set --match-set blacklist src -j LOG --log-prefix "DROP blacklist entry: "
iptables v1.3.8: Unknown arg `--match-set'
Try `iptables -h' or 'iptables --help' for more information.
====================
Update: Solved by change "-m set --match-set blacklist" to "-m set --set blacklist"
Last edited:
I got this log:
Isn't the firewall script supposed to ban these ips?? What's going on?
Then i ran the firewall script manually, with following output:
What am i missing??
My problem seems the same as post #49, but no answer?
Code:
Dec 27 19:51:55 dropbear[24029]: Bad password attempt for 'admin' from 122.225.109.206:48156
Dec 27 19:51:56 dropbear[24031]: Login attempt for nonexistent user from 122.225.109.206:53411
Dec 27 19:51:56 dropbear[24029]: Exit before auth (user 'admin', 10 fails): Max auth tries reached - user 'admin' from 122.225.109.206:48156
Dec 27 19:51:56 dropbear[24032]: Child connection from 122.225.109.206:56225
Dec 27 19:51:56 dropbear[24031]: Login attempt for nonexistent user from 122.225.109.206:53411
Dec 27 19:51:56 dropbear[24033]: Child connection from 122.225.109.206:56757
Dec 27 19:51:57 dropbear[24031]: Login attempt for nonexistent user from 122.225.109.206:53411
Dec 27 19:51:58 dropbear[24031]: Login attempt for nonexistent user from 122.225.109.206:53411
Dec 27 19:51:58 dropbear[24032]: Login attempt for nonexistent user from 122.225.109.206:56225
Dec 27 19:51:58 dropbear[24031]: Login attempt for nonexistent user from 122.225.109.206:53411
Dec 27 19:51:59 dropbear[24032]: Login attempt for nonexistent user from 122.225.109.206:56225
Dec 27 19:51:59 dropbear[24031]: Login attempt for nonexistent user from 122.225.109.206:53411
Dec 27 19:51:59 dropbear[24032]: Login attempt for nonexistent user from 122.225.109.206:56225
Dec 27 19:52:00 dropbear[24031]: Login attempt for nonexistent user from 122.225.109.206:53411
Dec 27 19:52:00 dropbear[24032]: Login attempt for nonexistent user from 122.225.109.206:56225
Dec 27 19:52:00 dropbear[24031]: Login attempt for nonexistent user from 122.225.109.206:53411
Dec 27 19:52:00 dropbear[24032]: Login attempt for nonexistent user from 122.225.109.206:56225
Dec 27 19:52:01 dropbear[24031]: Exit before auth: Max auth tries reached - user 'is invalid' from 122.225.109.206:53411
Dec 27 19:52:01 dropbear[24032]: Login attempt for nonexistent user from 122.225.109.206:56225
Dec 27 19:52:01 dropbear[24035]: Child connection from 122.225.109.206:2035
Dec 27 19:52:01 dropbear[24033]: Bad password attempt for 'admin' from 122.225.109.206:56757
Dec 27 19:52:02 dropbear[24032]: Login attempt for nonexistent user from 122.225.109.206:56225
Dec 27 19:52:02 dropbear[24033]: Bad password attempt for 'admin' from 122.225.109.206:56757
Dec 27 19:52:02 dropbear[24032]: Exit before auth: Error reading: Connection reset by peer
Dec 27 19:52:02 dropbear[24033]: Exit before auth (user 'admin', 2 fails): Error reading: Connection reset by peer
Dec 27 19:52:02 dropbear[24035]: Exit before auth: Error writing: Connection reset by peer
Dec 27 20:00:01 [B][COLOR="Red"]Firewall: [Complete] 0 IPs currently banned. 0 New IP's Banned. [/COLOR][/B]
Dec 27 20:17:03 dropbear[24157]: Child connection from 122.194.76.75:1077
Dec 27 20:17:05 dropbear[24157]: Login attempt for nonexistent user from 122.194.76.75:1077
Dec 27 20:17:06 dropbear[24157]: Exit before auth: Disconnect received
Dec 27 20:17:09 dropbear[24158]: Child connection from 122.194.76.75:3897
Dec 27 20:17:14 dropbear[24158]: Login attempt for nonexistent user from 122.194.76.75:3897
Dec 27 20:17:14 dropbear[24158]: Exit before auth: Disconnect received
Dec 27 20:17:18 dropbear[24159]: Child connection from 122.194.76.75:5940
Dec 27 20:17:24 dropbear[24159]: Login attempt for nonexistent user from 122.194.76.75:5940
Dec 27 20:17:24 dropbear[24159]: Exit before auth: Error reading: Connection reset by peer
Dec 27 20:47:56 dropbear[24279]: Child connection from 113.161.0.114:52661
Dec 27 20:47:57 dropbear[24279]: Exit before auth: Exited normallyIsn't the firewall script supposed to ban these ips?? What's going on?
Then i ran the firewall script manually, with following output:
Code:
admin@RT-AC56U:/tmp/home/root# sh /jffs/scripts/firewall-start
#!/bin/sh
############################################################
## 17/04/2014 --- RT-AC56U/RT-AC68U Firewall Addition v2.2 #
################################################################################
######
### ----- Make Sure To Edit The Following Files -----
#
### /jffs/firewall-start <-- Sets up cronjob/iptables rules
#
### /opt/bin/firewall <-- Blacklists IP's From /opt/tmp/ipset
.txt #
### /opt/tmp/ipset.txt <-- Banned IP List/IPSet Rules
#
################################################################################
######
##############################
#####Commands / Variables#####
##############################
UNBANSINGLE="unban" # <-- Remove Single IP From Blacklist
UNBANALL="unbanall" # <-- Unbans All IPs In Blacklist
REMOVEBANS="removeall" # <-- Remove All Entries From Blacklist
SAVEIPSET="save" # <-- Save Blacklists to /opt/tmp/ipset.txt
BANSINGLE="ban" # <-- Adds Entry To Blacklist
BANCOUNTRYSINGLE="country" # <-- Adds entire country to blacklist
BANCOUNTRYLIST="bancountry" # <-- Bans specified countries in this file
WHITELIST="whitelist" # <-- Add IPs from path to Whitelist
BACKUPRULES="backup" # <-- Backup IPSet Rules to /opt/tmp/ipset2.txt / C
hecks for firmware updates
##############################
Correct Settings Detected
Correct Settings Detected.
[IP Banning Started] ... ... ...
iptables: No chain/target/match by that name.
/opt/bin/firewall: line 145: echo: Argument list too long
Started: Sat Dec 27 20:56:51 GMT 2014
Finished: Sat Dec 27 20:56:52 GMT 2014
0 IP's currently banned.
admin@RT-AC56U:/tmp/home/root#What am i missing??
My problem seems the same as post #49, but no answer?
Last edited:
wbennett77
Regular Contributor
Eet_46,
Try the command "firewall save" one time. Not using this right now but seemed to kick start the banning for me if I remember correctly.
Try the command "firewall save" one time. Not using this right now but seemed to kick start the banning for me if I remember correctly.
Well, i already ran this command some time ago, to make it create /opt/tmp/ipset.txt.
So that file exists already, making me doubt that this is the solution :/
Btw, only thing i edited was the path in "firewall-start", from
as it otherwise gave me an error.
So that file exists already, making me doubt that this is the solution :/
Btw, only thing i edited was the path in "firewall-start", from
to
as it otherwise gave me an error.
Last edited:
Adamm
Part of the Furniture
I saw this question being asked a few times and this thread being linked so I thought i'd post my current code. I removed a few functions like my autoupdate feature until I get my VPS up and running again.
Code:
#!/bin/sh
#################################################################################################
## - 25/12/2014 --- RT-AC66U/RT-AC56U/RT-AC68U Firewall Addition v2.5 - #
###################################################################################################################
### ----- Make Sure To Edit The Following Files ----- #
### /jffs/firewall-start <-- Sets up cronjob/iptables rules #
### /jffs/scripts/firewall <-- Blacklists IP's From /jffs/scripts/ipset.txt #
### /jffs/scripts/ipset.txt <-- Banned IP List/IPSet Rules #
###################################################################################################################
##############################
#####Commands / Variables#####
##############################
UNBANSINGLE="unban" # <-- Remove Single IP From Blacklist
UNBANALL="unbanall" # <-- Unbans All IPs In Blacklist
REMOVEBANS="removeall" # <-- Remove All Entries From Blacklist
SAVEIPSET="save" # <-- Save Blacklists to /jffs/scripts/ipset.txt
BANSINGLE="ban" # <-- Adds Entry To Blacklist
BANCOUNTRYSINGLE="country" # <-- Adds entire country to blacklist
BANCOUNTRYLIST="bancountry" # <-- Bans specified countries in this file
WHITELIST="whitelist" # <-- Add IPs from path to Whitelist
NEWLIST="new" # <-- Create new IPSet Blacklist
DUMPCFE="dumpcfe" # <-- Dumps current CFE to /jffs/scripts/cfe.dump
UPDATECFE="updatecfe" # <-- Flash CFE from /jffs/scripts/cfe.flash (reset nvram afterwards)
##############################
start_time=`date +%s`
cat /jffs/scripts/firewall | head -28
#####################################################################################################################################
# - Unban / Unbanall / Removeall / Save / Ban / Country / Bancountry / Whitelist / Hideme / Findme/ DumpCFE / UpdateCFE / Backup - #
#####################################################################################################################################
if [ X"$@" = X"$UNBANSINGLE" ]
then
echo "Input IP Address To Unban"
read unbannedip
logger -t Firewall "[Unbanning And Removing $unbannedip From Blacklist] ... ... ..."
ipset -D Blacklist $unbannedip
echo "`sed /$unbannedip/d /jffs/scripts/ipset.txt`" > /jffs/scripts/ipset.txt
echo "$unbannedip Is Now Unbanned"
elif [ X"$@" = X"$UNBANALL" ]
then
echo "[Unbanning All IP's] ... ... ..."
logger -t Firewall "[Unbanning All IP's] ... ... ..."
ipset --flush Blacklist
ipset --flush BlockedCountries
elif [ X"$@" = X"$REMOVEBANS" ]
then
nvram set Blacklist=`expr \`ipset -L Blacklist | wc -l\` - 6`
echo "[Deleting All `echo \`nvram get Blacklist\`` Entries From Blacklist] ... ... ..."
logger -t Firewall "[Deleting All `echo \`nvram get Blacklist\`` Entries From Blacklist] ... ... ..."
ipset --flush Blacklist
ipset --flush BlockedCountries
ipset --save > /jffs/scripts/ipset.txt
elif [ X"$@" = X"$SAVEIPSET" ]
then
echo "[Saving Blacklists] ... ... ..."
ipset --save > /jffs/scripts/ipset.txt
echo "`sed '/crond: USER admin/d' /tmp/syslog.log`" > /tmp/syslog.log
elif [ X"$@" = X"$BANSINGLE" ]
then
echo "Input IP Address"
read bannedip
logger -t Firewall "[Adding $bannedip To Blacklist] ... ... ..."
ipset -q -A Blacklist $bannedip
echo "$bannedip Is Now Banned"
elif [ X"$@" = X"$BANCOUNTRYSINGLE" ]
then
echo "Input Country Abbreviation"
read country
for IP in $(wget -q -O - http://www.ipdeny.com/ipblocks/data/countries/$country.zone)
do
ipset -q -A BlockedCountries $IP
done
elif [ X"$@" = X"$BANCOUNTRYLIST" ]
then
echo "[Banning Spam Countries] ... ... ..."
for country in pk cn in jp ru sa
do
for IP in $(wget -q -O - http://www.ipdeny.com/ipblocks/data/countries/$country.zone)
do
ipset -q -A BlockedCountries $IP
done
done
elif [ X"$@" = X"$WHITELIST" ]
then
echo "Input file location"
read WHITELISTFILE
for IP in `cat $WHITELISTFILE`
do
ipset -q -A Whitelist $IP
echo $IP
done
ipset --save > /jffs/scripts/ipset.txt
elif [ X"$@" = X"$NEWLIST" ]
then
echo "Does The Blacklist Need To Be Downloaded? yes/no"
read ENABLEDOWNLOAD
if [ X"$ENABLEDOWNLOAD" = X"yes" ]; then
echo "Input URL For IPSet Blacklist"
read DOWNLOADURL
wget -O /jffs/scripts/ipset2.txt $DOWNLOADURL
fi
echo "Input New Set Name"
read SETNAME
sed -i "s/Blacklist/$SETNAME/g" /jffs/scripts/ipset2.txt
ipset -q -R < /jffs/scripts/ipset2.txt
echo "Successfully Added New Set"
elif [ X"$@" = X"$DUMPCFE" ] && [ X"`nvram get model`" = X"RT-AC68U" ]
then
echo "Dumping CFE"
logger -t Firewall "[Dumping CFE] ... ... ..."
OLDCFE="`strings /dev/mtd0 | grep model` - `strings /dev/mtd0 | grep bl_v` - `strings /dev/mtd0 | grep 0:ccode` - `strings /dev/mtd0 | grep et0macaddr` - `strings /dev/mtd0 | grep 0:macaddr` - `strings /dev/mtd0 | grep 1:macaddr` - `strings /dev/mtd0 | grep secret_code`"
cat /dev/mtd0 > /jffs/scripts/cfe.dump
echo "Sucessfully Dumped CFE - $OLDCFE"
logger -t Firewall "Sucessfully Dumped CFE - $OLDCFE"
elif [ X"$@" = X"$UPDATECFE" ] && [ X"`nvram get model`" = X"RT-AC68U" ]
then
echo "Flashing new CFE"
logger -t Firewall "[Flashing new CFE] ... ... ..."
OLDCFE="`strings /dev/mtd0 | grep et0macaddr` `strings /dev/mtd0 | grep 0:macaddr` `strings /dev/mtd0 | grep 1:macaddr` `strings /dev/mtd0 | grep secret_code`"
NEWCFE="`strings /jffs/scripts/cfe.flash | grep et0macaddr` `strings /jffs/scripts/cfe.flash | grep 0:macaddr` `strings /jffs/scripts/cfe.flash | grep 1:macaddr` `strings /jffs/scripts/cfe.flash | grep secret_code`"
if [ X"`echo $OLDCFE`" = X"`echo $NEWCFE`" ]; then
echo "Correct Values Detected"
/jffs/scripts/mtd-write cfe.flash boot && status="Successfully flashed new CFE. `strings /dev/mtd0 | grep bl_v` `strings /dev/mtd0 | grep 0:ccode` $NEWCFE" || status="Failed flashing new CFE"
logger -t Firewall "$status ... ... ..."
echo "$status"
else
echo "Values Missing From New CFE - Make Sure Values Are Hex'd In" && status="Values Missing From New CFE - Make Sure Values Are Hex'd In"
echo "Old CFE - $OLDCFE"
echo "New CFE - $NEWCFE"
logger -t Firewall "$status ... ... ..."
fi
else
if [ X"`nvram get fw_enable_x`" = X"1" ]
then
echo "Correct Settings Detected."
else
echo "Enabled SPI Firewall"
nvram set fw_enable_x=1
nvram commit
fi
if [ X"`nvram get fw_log_x`" = X"drop" ]
then
echo "Correct Settings Detected"
else
echo "Enabled Firewall Logging"
nvram set fw_log_x=drop
nvram commit
fi
if [ X"`nvram get clkfreq`" != X"1200,800" ] && [ X"`nvram get model`" = X"RT-AC68U" ]
then
echo "Enabled Overclock - Current Clock `nvram get clkfreq`"
nvram set clkfreq=1200,800
nvram commit
else
echo "Correct Settings Detected."
fi
echo "`sed '/IP Banning Started/d' /tmp/syslog.log`" > /tmp/syslog.log
echo "[IP Banning Started] ... ... ..."
logger -t Firewall "[IP Banning Started] ... ... ..."
ipset -q -R < /jffs/scripts/ipset.txt
ipset -q -N Whitelist nethash
ipset -q -N Blacklist iphash
ipset -q -N BlockedCountries nethash
iptables -D logdrop -m state --state NEW -j LOG --log-prefix "DROP " --log-tcp-sequence --log-tcp-options --log-ip-options > /dev/null 2>&1
iptables -D INPUT -m set --match-set Whitelist src -j ACCEPT
iptables -D INPUT -m set --match-set Blacklist src -j DROP
iptables -D INPUT -m set --match-set BlockedCountries src -j DROP
iptables -D logdrop -m state --state NEW -j SET --add-set Blacklist src
iptables -I INPUT -m set --match-set Blacklist src -j DROP
iptables -I INPUT -m set --match-set BlockedCountries src -j DROP
iptables -I INPUT -m set --match-set Whitelist src -j ACCEPT
iptables -I logdrop -m state --state NEW -j SET --add-set Blacklist src
ipset -q -A Whitelist 192.168.1.0/24
ipset -q -A Whitelist 192.3.148.0/24
ipset -q -A Whitelist `nvram get lan_ipaddr`/24
echo "`sed '/DROP IN=/d' /tmp/syslog.log`" > /tmp/syslog.log
echo "`sed '/DROP IN=/d' /tmp/syslog.log-1`" > /tmp/syslog.log-1
fi
###############
# - Logging - #
###############
OLDAMOUNT=`nvram get Blacklist`
nvram set Blacklist=`expr \`ipset -L Blacklist | wc -l\` - 6`
NEWAMOUNT=`nvram get Blacklist`
nvram set BlacklistTotal=`expr \`ipset -L | wc -l\` - 26`
start_time=$(expr `date +%s` - $start_time)
echo "[Complete] $NEWAMOUNT IPs currently banned. `expr $NEWAMOUNT - $OLDAMOUNT` New IP's Banned. `nvram get BlacklistTotal` Banned Overall [`echo $start_time`s]"
logger -t Firewall "[Complete] $NEWAMOUNT IPs currently banned. `expr $NEWAMOUNT - $OLDAMOUNT` New IP's Banned. `nvram get BlacklistTotal` Banned Overall [`echo $start_time`s]"
Code:
#!/bin/sh
echo "0 * * * * /jffs/scripts/firewall save" > /var/spool/cron/crontabs/admin
[ -n "`pidof crond`" ] && killall -q crond
sleep 5
crond
sh /jffs/scripts/firewall
Last edited:
Sorry, i'm a bit confused now, with your new code, some of the changes would be nice to know why they are made
Maybe an update of the main post, so everything is up to date? That would be a lot easier, rather than one having to read through the entire thread to gather bits of info..
faria
Senior Member
Hold the Phone... why does this script backup and flashes the bootoader?
Similar threads
Similar threads
Similar threads
-
-
Skynet Skynet showing router itself making calls to China?
- Started by Skywise
- Replies: 26
-
Skynet Skynet - Blocked outbounds coming from the router itself?
- Started by JuanGF
- Replies: 12
-
Skynet Installing Skynet causes router to crash and reboot
- Started by ovancantfort
- Replies: 26
-
Skynet I have installed the skynet firewall how do I configure it if the security of iot devices is important?
- Started by lenovomen
- Replies: 2
-
Skynet Message on SKYNET I havent seen before- Started by Davidncali001
- Replies: 1
-
-
-
Skynet SkyNet/Firewall blocking all ping requests, including outbound
- Started by nearlyheadlessarvie
- Replies: 6
-
Skynet SOLVED: Scrollbar Disappears on Skynet Tab on Asuswrt-Merlin 386.14
- Started by WRobertE
- Replies: 10
Latest threads
-
wrong foldername when get permission
- Started by dmr24
- Replies: 1
-
-
AX88U will only connect at 80Mhz
- Started by antik
- Replies: 2
-
QNAP Firmware 5.2.2.xxx Update destroys Login and Data- Started by PR3MIUM
- Replies: 1
-
Support SNBForums w/ Amazon
If you'd like to support SNBForums, just use this link and buy anything on Amazon. Thanks!
Sign Up For SNBForums Daily Digest
Get an update of what's new every day delivered to your mailbox. Sign up here!