TeHashX
Very Senior Member
Should be an easier way to restart wan with a single input like "restart-wan" but I can't remember now.
[TUTORIAL]pyLoad Download Manager through Entware
- Thread starter TeHashX
- Start date
Should be an easier way to restart wan with a single input like "restart-wan" but I can't remember now.
JandersonMira
New Around Here
ASUS RT-N56U
Works like a charm on ASUS RT-N56U with custom firmware 3.4.3.7-072
For newbies like me just a tip:
install openssl-util using opkg to generate ssl keys.
pyLoad with ExtractArchive Plugin and miniDLNA pointing to pyLoad downloads folder is awesome to watch tv series and movies.
Thanks for the excellent tutorial.
from Brazil...
Works like a charm on ASUS RT-N56U with custom firmware 3.4.3.7-072
For newbies like me just a tip:
install openssl-util using opkg to generate ssl keys.
pyLoad with ExtractArchive Plugin and miniDLNA pointing to pyLoad downloads folder is awesome to watch tv series and movies.
Thanks for the excellent tutorial.
from Brazil...
JandersonMira
New Around Here
ASUS RT-N56U
Yes, ASUS RT-N56U Black Diamond.
Yes, ASUS RT-N56U Black Diamond.
Hello,
i have install optware pyload before i install th is entware Version of pyload.
i delete only the folders on the hdd.
My Router is N66U, RAM usage is 170mb.
I become this error on extract rar files.
i have install optware pyload before i install th is entware Version of pyload.
i delete only the folders on the hdd.
My Router is N66U, RAM usage is 170mb.
I become this error on extract rar files.
Code:
29 14.10.2014 11:53:49 INFO Package finished: 4u0t3h82z45fflg
830 14.10.2014 11:53:49 INFO ExtractArchive: Package 4u0t3h82z45fflg queued for later extracting
831 14.10.2014 11:53:49 INFO ExtractArchive: Check package 4u0t3h82z45fflg
832 14.10.2014 11:53:49 INFO ExtractArchive: Dlg21WBLDGx6O.part01.rar | Extract to /mnt/sda1/downloads/4u0t3h82z45fflg/
833 14.10.2014 11:53:49 ERROR ExtractArchive: Dlg21WBLDGx6O.part01.rar | Unknown Error | [Errno 12] Cannot allocate memory
834 14.10.2014 11:53:49 ERROR ExtractArchive: Dlg21WBLDGx6O.part01.rar | Extract failedNo more access to WebUI after Firefox 33 upgrade
I had to downgrade to FireFox version 32.0.2, cause 33 doesn't allow me to connect to my local PyLoad/Entware installation using https with the following error:
**** UPDATE ****
I've just found a way to solve this problem.
Follow the tutorial in the first post, but at step 4, change the ssl keys creation code as shown here:
Then reboot your router.
Now I'm again able to access to the PyLoad WebUI from Firefox 33.
Max
I had to downgrade to FireFox version 32.0.2, cause 33 doesn't allow me to connect to my local PyLoad/Entware installation using https with the following error:
Code:
sec_error_invalid_key**** UPDATE ****
I've just found a way to solve this problem.
Follow the tutorial in the first post, but at step 4, change the ssl keys creation code as shown here:
Code:
/usr/sbin/openssl genrsa -out ssl.key [COLOR="Red"][B]1024[/B][/COLOR]
/usr/sbin/openssl req -new -key ssl.key -out ssl.csr
/usr/sbin/openssl req -days 36500 -x509 -key ssl.key -in ssl.csr > ssl.crtThen reboot your router.
Now I'm again able to access to the PyLoad WebUI from Firefox 33.
Max
Last edited:
TeHashX
Very Senior Member
Ntfs will never work reliably on linux.
Thanks for the response; 2 questions:
- How can I tell the current formatting of my attached HDD? I believe its ntfs and works flawlessly?
- If i try installing pyload with ntfs will it work, just not reliably?
TeHashX
Very Senior Member
1) Check with "mount" command
2) Try and see
I heard 0.4.10 is out. Does it have all up-to-date plugins from 0.4.9? Should I update Entware package or wait for 0.5.0 release?
TeHashX
Very Senior Member
Which router? Here are updated guides www.hqt.ro
RT-N16, AsusWRT Merlin 376.49.5, Entware
This is openssl utility from firmware. I've updated pyload to last available revision and made some dependencies optional (including openssl-utils). Pyload package will show following note after installation:
Code:
opkg install pyload
...
Configuring pyload.
Please install optional pyload dependencies first.
* for SSL connection with WebUI:
opkg install pyopenssl openssl-utils
* for several hosters, ClickNLoad feature:
opkg install duktape
* for captcha recognition for a small amount of plugins:
opkg install python-imglib tesseract
* for RSDF/CCF/DLC support to decrypt container files:
opkg install python-crypto
* for using ExtractArchive plugin:
opkg install unrar unzip
And only then configure pyload by
pyload --configdir=/opt/var/pyloadIf last Entware update broke SSL WebUI, run:
Code:
opkg --force-depends remove pyopenssl
opkg install pyopenssl
Code:
admin@MyAsus:/tmp/home/root# opkg install openssl-utils
Unknown package 'openssl-utils'.
Collected errors:
* opkg_install_cmd: Cannot install package openssl-utils.And this should be an error in filename i think, it should be openssl-util instead of openssl-utils.
Code:
admin@MyAsus:/tmp/mnt/MYASUS/entware/share/python/pyload# python pyLoadCore.py --changedir --configdir=/opt/etc/pyload/.pyload
python: can't open file 'pyLoadCore.py': [Errno 2] No such file or directory
admin@MyAsus:/tmp/mnt/MYASUS/entware/share/python/pyload#This because pyLoadCore in not installed in /opt/share/python/pyload but in /opt/share/pyload
Finally.... S51pyload should be edited to use the correct configdir.
After that... my pyload starts, but I'm still unable to connect using https from Firefox...
Code:
(Codice di errore: ssl_error_rx_record_too_long)http connection works fine.
pyload client on my Android phone seems working fine with SSL...
This is drivng me crazy...
Going a little bit out of topic... after all these troubles, now I'm not also able to run amule due to a missing libcrypto++8...
Last edited:
Installed pyload from scratch. WebUI works fine in FF with SSL. Please read tips from pyload carefully.
Code:
admin@RT-N66U:/tmp/home/root# opkg install amule
Installing amule (2.3.1-1) to root
...
Configuring amule.
admin@RT-N66U:/tmp/home/root# ldd `which amuled`
libpthread.so.0 => /opt/lib/libpthread.so.0 (0x2aac0000)
libiconv.so.2 => /opt/lib/libiconv.so.2 (0x2aae5000)
libz.so.1 => /opt/lib/libz.so.1 (0x2abd8000)
libcrypto++.so.9 => /opt/lib/libcrypto++.so.9 (0x2abfc000)
libwx_baseu_net-2.8.so.0 => /opt/lib/libwx_baseu_net-2.8.so.0 (0x2b0f2000)
libwx_baseu-2.8.so.0 => /opt/lib/libwx_baseu-2.8.so.0 (0x2b12e000)
libstdc++.so.6 => /opt/lib/libstdc++.so.6 (0x2b27f000)
libm.so.0 => /opt/lib/libm.so.0 (0x2b37a000)
libgcc_s.so.1 => /opt/lib/libgcc_s.so.1 (0x2b396000)
libc.so.0 => /opt/lib/libc.so.0 (0x2b3b9000)
libdl.so.0 => /opt/lib/libdl.so.0 (0x2b46a000)
ld-uClibc.so.0 => /opt/lib/ld-uClibc.so.0 (0x2aaa8000)
admin@RT-N66U:/tmp/home/root# amuled
2015-08-05 08:35:58: Initialising aMuleD 2.3.1 compiled with v2.8.12
2015-08-05 08:35:58: Checking if there is an instance already running...
2015-08-05 08:35:58: No other instances are running.
!2015-08-05 08:35:58: ERROR: WARNING Warning! You are running aMule as root.
!2015-08-05 08:35:58: Doing so is not recommended for security reasons,
!2015-08-05 08:35:58: and you are advised to run aMule as an normal
!2015-08-05 08:35:58: user instead.
--------------------------------------------------
Warning! You are running aMule as root.
Doing so is not recommended for security reasons,
and you are advised to run aMule as an normal
user instead.
--------------------------------------------------
...Can you please be more detailed ?
I cleaned my entware installation, installed pyload and relative deps, as suggested by pyload after installation.
Then I changed config dir and followed the tutorial in first page, but using /opt/share/pyload instead of /opt/share/python/pyload.
pyLoad cfg has been done using my configdir /opt/etc/pyload/.pyload instead of pyload --configdir=/opt/var/pyload.
Installed pyopenssl is 0.13.1-1, pyLoad 0.4.9-20150804-1.
No success also cleaning pyopenssl deps...
Code:
admin@MyAsus:/tmp/home/root# opkg update
Downloading http://entware.wl500g.info/binaries/entware/Packages.gz.
Updated list of available packages in /opt/var/opkg-lists/openwrt.
admin@MyAsus:/tmp/home/root# opkg list amule*
amule - 2.3.1-1 - A multi-platform eMule-like ed2k client
amule - 2.3.1-2
admin@MyAsus:/tmp/home/root# opkg install amule
Installing amule (2.3.1-2) to root...
Collected errors:
* opkg_download_pkg: Package amule is not available from any configured src.
* opkg_install_pkg: Failed to download amule. Perhaps you need to run 'opkg update'?
* opkg_install_cmd: Cannot install package amule.
admin@MyAsus:/tmp/home/root#What the hell means ???
Is available after a package list update but not availabe for download ?
Thanks again for your help
Similar threads
Similar threads
| Thread starter | Title | Forum | Replies | Date |
|---|---|---|---|---|
|
One comprehensive Adguard Home installation tutorial (amtm). | Asuswrt-Merlin AddOns | 2 |
Similar threads
-
One comprehensive Adguard Home installation tutorial (amtm).
- Started by Igs
- Replies: 2
Latest threads
-
Asus RT-BE92U cannot ping out [but all connected devices can access internet!]
- Started by rickterowl
- Replies: 0
-
Captive portal in 3.0.0.6 firmware (Pro routers)?
- Started by Fraih
- Replies: 1
-
GT-AX11000 Pro - Issue Gaming on Two Xbox Consoles Simultaneously
- Started by TheFunk7279
- Replies: 2
-
-
USB Wifi 7 adapter - USB-BE92 Nano- Started by RMerlin
- Replies: 4
Support SNBForums w/ Amazon
If you'd like to support SNBForums, just use this link and buy anything on Amazon. Thanks!
Sign Up For SNBForums Daily Digest
Get an update of what's new every day delivered to your mailbox. Sign up here!