Aegis Aegis (simple yet effective protection)

HELLO_wORLD · Feb 23, 2021

Warlord1981 said:
Hmm i think i get congestion/packetloss-like behaviour. Even running speedtest by ookla, the needle at some moments freezes for a second or two both in download & upload and also while talking with a friend on Discord he was losing me at the exact time needles were freezing. Removed the rules and restarted firewall, I even restarted both the modem and the router and the issue persists. Is it possible to view logs of such behaviour? Or in general monitor latency/jitter/packet loss? If I connect my PC directly to the modem everything is ok.

Additionally what are the [LAN access from remote] entries in my Netgear's Logs? I have a lot. In fact for the first time i had a warning from my Bitdfender firewall today that a port scan was detected and blocked from remote ip: 220.164.192.25

All the logs are going to /var/log/log-message
It is rotated when it is over 1000 lines, so no huge history is accessible.

The R7800 is able to handle speedtest (from LAN, not router) without congestion. I use ookla official CLI binary, and I reach about 950 Mbit/s both way (max of my bandwidth) without glitches.

Might be here the modem or ISP.

Do you have that when you use directly the modem and a PC (and not going at all through R7800)?

Warlord1981 · Feb 23, 2021

HELLO_wORLD said:
All the logs are going to /var/log/log-message
It is rotated when it is over 1000 lines, so no huge history is accessible.

The R7800 is able to handle speedtest (from LAN, not router) without congestion. I use ookla official CLI binary, and I reach about 950 Mbit/s both way (max of my bandwidth) without glitches.

Might be here the modem or ISP.

Do you have that when you use directly the modem and a PC (and not going at all through R7800)?

When I connected the PC directly to modem I didn't notice that behaviour.

I called ISP and they said they don't see any packet loss on their side.

EDIT: Lets continue the discussion on this matter on my topic, so we won't get out off topic again. Thank you.

HELLO_wORLD · Feb 24, 2021

1.6.12

Added basic privacy friendly metrics code.
When upgrade is done, and only then, it sends ip (not stored, just to find country), router model (just R7800, R9000, RBR50...), and if it is installed internal or external (just "ext" or "int", no drive name sent).
It is using goat counter that is open source and cares about privacy, and all I have at the end is country (no ip), router model, aegis version being downloaded as well as installation being internal or external.

This is to have basic statistics about aegis (how many people are downloading it, where on the world, vans router models).

Once an upgrade or install is done, it does not send anything until next upgrade. Nothing is ever sent about usage, lists, etc...

Also, this upgrade from 1.6.11 to 1.6.12 won’t send anything, as the upgrade process doing it is not in 1.6.11.
It will start the following upgrade (to 1.7.0 beta or to 1.7.0 when not beta anymore).

jrbmw · Feb 24, 2021

I have a problem , aegis runs ok until I start the vpn.
tried different versions of voxel but still the same. Tried deleting and reinstalling,same result.Tried installing internal memory and usb.

AEGIS

by bolemo

version 1.6.12
internal drive

STATUS COMMAND LOG TOOLS Blocklists Sources Custom Blacklist Custom Whitelist

Status @ 2021-02-24 15:57:44 (router time)

Something is not right!

Errors

iptables: VPN network range bypass rules are not right!

Detailed status

Active WAN interface is 'ppp0'.
Active VPN tunnel is 'tun21'.
Sources cache directives update time: 2021-02-24 15:57:30
Blocklist directives generation time: 2021-02-24 15:57:31
set: firewall-start.sh is set for aegis.
ipset: blocklist is set.
iptables: shield chains are set.
iptables: VPN tunnel IFO rules are set.
iptables: WAN interface IFO rules are set.

Last shield uprear report

shield was upreared from: aegis script @ 2021-02-24 15:57:35
WAN interface was 'ppp0'.
VPN tunnel was 'tun21'.
directives: ipset blocklist was set from file.
directives: no whitelist file was found.
iptables: rules were UNSUCCESSFULLY (re)set!
log daemon: was already off.

Debug

device info: R7800 R7800 V1.0.2.82.2SF
aegis info: aegis 1.6.12-int
status codes: ck:1557|pb:64|wn:0|wifpp0|wnt:195.213.35.223|tif:tun21|tnt:10.39.0.222|blc:619647669|wlc:0|log:1
info file: 103951|ppp0|tun21
timestamps: inf:1614182255|cch:1614182250|bld:1614182251|wld:
conf:
- aegis.wan=net-iface
- aegis.tun=net-iface
- aegis.log=log
- aegis.up=1
- aegis_web.log=subsection
iptables engine rules:
- -N aegis_dst
- -N aegis_src
- -A INPUT -i ppp0 -m set --match-set aegis_bl src -m comment --comment "incoming in aegis blocklist" -j aegis_src
- -A INPUT -i tun21 -m set --match-set aegis_bl src -m comment --comment "incoming in aegis blocklist" -j aegis_src
- -A FORWARD -i ppp0 -m set --match-set aegis_bl src -m comment --comment "incoming in aegis blocklist" -j aegis_src
- -A FORWARD -o ppp0 -m set --match-set aegis_bl dst -m comment --comment "outgoing in aegis blocklist" -j aegis_dst
- -A FORWARD -i tun21 -m set --match-set aegis_bl src -m comment --comment "incoming in aegis blocklist" -j aegis_src
- -A FORWARD -o tun21 -m set --match-set aegis_bl dst -m comment --comment "outgoing in aegis blocklist" -j aegis_dst
- -A OUTPUT -o ppp0 -m set --match-set aegis_bl dst -m comment --comment "outgoing in aegis blocklist" -j aegis_dst
- -A OUTPUT -o tun21 -m set --match-set aegis_bl dst -m comment --comment "outgoing in aegis blocklist" -j aegis_dst
- -A aegis_dst -d 10.39.0.222/32 -o tun21 -m comment --comment "aegis inet bypass" -j RETURN
- -A aegis_dst -m comment --comment "aegis reject outgoing" -j REJECT --reject-with icmp-admin-prohibited
- -A aegis_src -s 10.39.0.222/32 -i tun21 -m comment --comment "aegis inet bypass" -j RETURN
- -A aegis_src -m comment --comment "aegis drop incoming" -j DROP
ipset engine sets:
- blocklist:
  - Name: aegis_bl
  - Type: hash:net
  - Revision: 7
  - Header: family inet hashsize 16384 maxelem 51087 bucketsize 12 initval 0xb339ef08
  - Size in memory: 1184472
  - References: 8
  - Number of entries: 51087

HELLO_wORLD · Feb 24, 2021

jrbmw said:
I have a problem , aegis runs ok until I start the vpn.
tried different versions of voxel but still the same. Tried deleting and reinstalling,same result.Tried installing internal memory and usb.

AEGIS

by bolemo

version 1.6.12
internal drive

STATUS COMMAND LOG TOOLS Blocklists Sources Custom Blacklist Custom Whitelist

Status @ 2021-02-24 15:57:44 (router time)

Something is not right!

Errors

iptables: VPN network range bypass rules are not right!

Detailed status

Active WAN interface is 'ppp0'.

Active VPN tunnel is 'tun21'.

Sources cache directives update time: 2021-02-24 15:57:30

Blocklist directives generation time: 2021-02-24 15:57:31

set: firewall-start.sh is set for aegis.

ipset: blocklist is set.

iptables: shield chains are set.

iptables: VPN tunnel IFO rules are set.

iptables: WAN interface IFO rules are set.

Last shield uprear report

shield was upreared from: aegis script @ 2021-02-24 15:57:35

WAN interface was 'ppp0'.

VPN tunnel was 'tun21'.

directives: ipset blocklist was set from file.

directives: no whitelist file was found.

iptables: rules were UNSUCCESSFULLY (re)set!

log daemon: was already off.

Debug

device info: R7800 R7800 V1.0.2.82.2SF

aegis info: aegis 1.6.12-int

status codes: ck:1557|pb:64|wn:0|wifpp0|wnt:195.213.35.223|tif:tun21|tnt:10.39.0.222|blc:619647669|wlc:0|log:1

info file: 103951|ppp0|tun21

timestamps: inf:1614182255|cch:1614182250|bld:1614182251|wld:

conf:

aegis.wan=net-iface

aegis.tun=net-iface

aegis.log=log

aegis.up=1

aegis_web.log=subsection

iptables engine rules:

-N aegis_dst

-N aegis_src

-A INPUT -i ppp0 -m set --match-set aegis_bl src -m comment --comment "incoming in aegis blocklist" -j aegis_src

-A INPUT -i tun21 -m set --match-set aegis_bl src -m comment --comment "incoming in aegis blocklist" -j aegis_src

-A FORWARD -i ppp0 -m set --match-set aegis_bl src -m comment --comment "incoming in aegis blocklist" -j aegis_src

-A FORWARD -o ppp0 -m set --match-set aegis_bl dst -m comment --comment "outgoing in aegis blocklist" -j aegis_dst

-A FORWARD -i tun21 -m set --match-set aegis_bl src -m comment --comment "incoming in aegis blocklist" -j aegis_src

-A FORWARD -o tun21 -m set --match-set aegis_bl dst -m comment --comment "outgoing in aegis blocklist" -j aegis_dst

-A OUTPUT -o ppp0 -m set --match-set aegis_bl dst -m comment --comment "outgoing in aegis blocklist" -j aegis_dst

-A OUTPUT -o tun21 -m set --match-set aegis_bl dst -m comment --comment "outgoing in aegis blocklist" -j aegis_dst

-A aegis_dst -d 10.39.0.222/32 -o tun21 -m comment --comment "aegis inet bypass" -j RETURN

-A aegis_dst -m comment --comment "aegis reject outgoing" -j REJECT --reject-with icmp-admin-prohibited

-A aegis_src -s 10.39.0.222/32 -i tun21 -m comment --comment "aegis inet bypass" -j RETURN

-A aegis_src -m comment --comment "aegis drop incoming" -j DROP

ipset engine sets:

blocklist:

Name: aegis_bl

Type: hash:net

Revision: 7

Header: family inet hashsize 16384 maxelem 51087 bucketsize 12 initval 0xb339ef08

Size in memory: 1184472

References: 8

Number of entries: 51087

All seems ok (iptables and ipset), meaning aegis is doing its job for you. Now, the status check reports wrongly an error, and it clearly should not.

I rewrote this almost entirely in 1.7.0.

Would you mind trying the beta version? Easy to revert to 1.6.12 if needed.

jrbmw · Feb 24, 2021

Tried, to update nothing updates

oot@R7800:/$
root@R7800:/$ aegis unset
root@R7800:/$ aegis upgrade -repo=beta

Upgrading:
- version installed: 1.6.12
- new version available: 1.7.0b4
? do you want to upgrade from 1.6.12 to 1.7.0b4 (y/n)? y

root@R7800:/$
root@R7800:/$

HELLO_wORLD · Feb 24, 2021

jrbmw said:
Tried, to update nothing updates

oot@R7800:/$
root@R7800:/$ aegis unset
root@R7800:/$ aegis upgrade -repo=beta

Upgrading:
- version installed: 1.6.12
- new version available: 1.7.0b4
? do you want to upgrade from 1.6.12 to 1.7.0b4 (y/n)? y

root@R7800:/$
root@R7800:/$

That is odd. Have you tried more than once?

And if you do just aegis upgrade and reapply 1.6.12, does it have the same problem?

jrbmw · Feb 24, 2021

Tried several times with same result

root@R7800:/$
root@R7800:/$ aegis upgrade

Upgrading:
- version installed: 1.6.12
- you have already the latest version: 1.6.12
? do you want to reapply it (y/n)? y

- Downloading:
/tmp/aegis.dl 100%[===================>] 67.07K --.-KB/s in 0.02s
- Script installed to /opt/bolemo/scripts/aegis
- downloading Web Companion:
/tmp/aegis.dl 100%[===================>] 23.34K --.-KB/s in 0.007s
- Web Companion htm file installed to /opt/bolemo/www/aegis.htm
/tmp/aegis.dl 100%[===================>] 18.61K --.-KB/s in 0.002s
- Web Companion cgi file installed to /opt/bolemo/www/cgi-bin/aegis_web.cgi
root@R7800:/$
root@R7800:/$

HELLO_wORLD · Feb 24, 2021

jrbmw said:
Tried several times with same result

root@R7800:/$
root@R7800:/$ aegis upgrade

Upgrading:
- version installed: 1.6.12
- you have already the latest version: 1.6.12
? do you want to reapply it (y/n)? y

- Downloading:
/tmp/aegis.dl 100%[===================>] 67.07K --.-KB/s in 0.02s
- Script installed to /opt/bolemo/scripts/aegis
- downloading Web Companion:
/tmp/aegis.dl 100%[===================>] 23.34K --.-KB/s in 0.007s
- Web Companion htm file installed to /opt/bolemo/www/aegis.htm
/tmp/aegis.dl 100%[===================>] 18.61K --.-KB/s in 0.002s
- Web Companion cgi file installed to /opt/bolemo/www/cgi-bin/aegis_web.cgi
root@R7800:/$
root@R7800:/$

Ok, that is very strange.

What if you do: aegis upgrade -repo=master
It should get 1.6.12

If it works, would you try again? Maybe a GitHub glitch when you tried?

jrbmw · Feb 24, 2021

still didnt update

root@R7800:/$
root@R7800:/$ aegis upgrade -repo=master

Upgrading:
- version installed: 1.6.12
- you have already the latest version: 1.6.12
? do you want to reapply it (y/n)? n

root@R7800:/$
root@R7800:/$ aegis unset
root@R7800:/$ aegis upgrade -repo=beta

Upgrading:
- version installed: 1.6.12
- new version available: 1.7.0b4
? do you want to upgrade from 1.6.12 to 1.7.0b4 (y/n)? y

root@R7800:/$
root@R7800:/$

HELLO_wORLD · Feb 24, 2021

jrbmw said:
still didnt update

root@R7800:/$
root@R7800:/$ aegis upgrade -repo=master

Upgrading:
- version installed: 1.6.12
- you have already the latest version: 1.6.12
? do you want to reapply it (y/n)? n

root@R7800:/$
root@R7800:/$ aegis unset
root@R7800:/$ aegis upgrade -repo=beta

Upgrading:
- version installed: 1.6.12
- new version available: 1.7.0b4
? do you want to upgrade from 1.6.12 to 1.7.0b4 (y/n)? y

root@R7800:/$
root@R7800:/$

And if you reapply (answering y) 1.6.12 using aegis upgrade -repo=master
Does it download or does it do the same as using -repo=beta?

I try to figure out if the problem is from using the argument -repo or not. If the download is successful when you use -repo=master, this is extremely strange, because the download process is exactly the same, just the url changes: one is from https://github.com/bolemo/aegis/raw/master/... and the other from https://github.com/bolemo/aegis/raw/beta/...

And it works for me (and apparently very one else).

Also does it stall or just quits instantly?

I will give you a way to install it manually

jrbmw · Feb 24, 2021

root@R7800:/$
root@R7800:/$ aegis upgrade -repo=master

Upgrading:
- version installed: 1.6.12
- you have already the latest version: 1.6.12
? do you want to reapply it (y/n)? y

- Downloading:
/tmp/aegis.dl 100%[===================>] 67.07K --.-KB/s in 0.02s
- Script installed to /opt/bolemo/scripts/aegis
- downloading Web Companion:
/tmp/aegis.dl 100%[===================>] 23.34K --.-KB/s in 0.02s
- Web Companion htm file installed to /opt/bolemo/www/aegis.htm
/tmp/aegis.dl 100%[===================>] 18.61K --.-KB/s in 0.003s
- Web Companion cgi file installed to /opt/bolemo/www/cgi-bin/aegis_web.cgi
root@R7800:/$
root@R7800:/$

HELLO_wORLD · Feb 24, 2021

jrbmw said:
root@R7800:/$
root@R7800:/$ aegis upgrade -repo=master

Upgrading:
- version installed: 1.6.12
- you have already the latest version: 1.6.12
? do you want to reapply it (y/n)? y

- Downloading:
/tmp/aegis.dl 100%[===================>] 67.07K --.-KB/s in 0.02s
- Script installed to /opt/bolemo/scripts/aegis
- downloading Web Companion:
/tmp/aegis.dl 100%[===================>] 23.34K --.-KB/s in 0.02s
- Web Companion htm file installed to /opt/bolemo/www/aegis.htm
/tmp/aegis.dl 100%[===================>] 18.61K --.-KB/s in 0.003s
- Web Companion cgi file installed to /opt/bolemo/www/cgi-bin/aegis_web.cgi
root@R7800:/$
root@R7800:/$

Ok, this is puzzling.

Could you try this (to check if there is a weird blocking between you and GitHub for the beta repo):
wget -vO- https://github.com/bolemo/aegis/raw/beta/aegis >/dev/null

You should have something like:

Code:

--2021-02-24 18:57:32--  https://github.com/bolemo/aegis/raw/beta/aegis
Resolving github.com... 140.82.121.3
Connecting to github.com|140.82.121.3|:443... connected.
HTTP request sent, awaiting response... 302 Found
Location: https://raw.githubusercontent.com/bolemo/aegis/beta/aegis [following]
--2021-02-24 18:57:38--  https://raw.githubusercontent.com/bolemo/aegis/beta/aegis
Resolving raw.githubusercontent.com... 185.199.108.133, 185.199.109.133, 185.199.110.133, ...
Connecting to raw.githubusercontent.com|185.199.108.133|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 69754 (68K) [text/plain]
Saving to: 'STDOUT'

-                                 100%[============================================================>]  68.12K  --.-KB/s    in 0.02s  

2021-02-24 18:57:38 (4.32 MB/s) - written to stdout [69754/69754]

jrbmw · Feb 24, 2021

root@R7800:/$
root@R7800:/$ wget -vO- https://github.com/bolemo/aegis/raw/beta/aegis >/dev/null
--2021-02-24 18:10:56-- https://github.com/bolemo/aegis/raw/beta/aegis
Resolving github.com... 140.82.121.3
Connecting to github.com|140.82.121.3|:443... connected.
HTTP request sent, awaiting response... 302 Found
Location: https://raw.githubusercontent.com/bolemo/aegis/beta/aegis [following]
--2021-02-24 18:10:56-- https://raw.githubusercontent.com/bolemo/aegis/beta/aegis
Resolving raw.githubusercontent.com... 185.199.108.133, 185.199.111.133, 185.199.109.133, ...
Connecting to raw.githubusercontent.com|185.199.108.133|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 69754 (68K) [text/plain]
Saving to: 'STDOUT'

- 100%[===================>] 68.12K --.-KB/s in 0.02s

2021-02-24 18:10:56 (3.24 MB/s) - written to stdout [69754/69754]

root@R7800:/$
root@R7800:/$

jrbmw · Feb 24, 2021

I can wait until the new version is released from beta

HELLO_wORLD · Feb 24, 2021

jrbmw said:
root@R7800:/$
root@R7800:/$ aegis upgrade -repo=master

Upgrading:
- version installed: 1.6.12
- you have already the latest version: 1.6.12
? do you want to reapply it (y/n)? y

- Downloading:
/tmp/aegis.dl 100%[===================>] 67.07K --.-KB/s in 0.02s
- Script installed to /opt/bolemo/scripts/aegis
- downloading Web Companion:
/tmp/aegis.dl 100%[===================>] 23.34K --.-KB/s in 0.02s
- Web Companion htm file installed to /opt/bolemo/www/aegis.htm
/tmp/aegis.dl 100%[===================>] 18.61K --.-KB/s in 0.003s
- Web Companion cgi file installed to /opt/bolemo/www/cgi-bin/aegis_web.cgi
root@R7800:/$
root@R7800:/$

If the wget test I sent before worked (I see that while I write here you answered) here is how you can install beta manually:

Code:

aegis unset
wget -qO- https://raw.githubusercontent.com/bolemo/aegis/beta/aegis >/opt/bolemo/scripts/aegis
wget -qO- https://raw.githubusercontent.com/bolemo/aegis/beta/aegis.htm >/opt/bolemo/www/aegis.htm
wget -qO- https://raw.githubusercontent.com/bolemo/aegis/beta/aegis_web.cgi >/opt/bolemo/www/cgi-bin/aegis_web.cgi
aegis up

Now, why the upgrade to beta from aegis is not working for you is beyond me at this point...

HELLO_wORLD · Feb 24, 2021

jrbmw said:
I can wait until the new version is released from beta

That will be very soon

blueliner · Feb 24, 2021

jrbmw said:
Tried, to update nothing updates

oot@R7800:/$
root@R7800:/$ aegis unset
root@R7800:/$ aegis upgrade -repo=beta

Upgrading:
- version installed: 1.6.12
- new version available: 1.7.0b4
? do you want to upgrade from 1.6.12 to 1.7.0b4 (y/n)? y

root@R7800:/$
root@R7800:/$

Aegis has been running great for me...thank you HELLO_wORLD!

However, I too have had some recent struggles with upgrades - at least from the web ui. I had never used the web ui until 1.6.9 and found I like it! I used it to upgrade to 1.6.10 and could not get Aegis to start afterwards. I recall the debug log had an error message at the time. I ended up reinstalling Aegis from the router console and all went well. I have never had a problem downloading/installing via wget and didn't think more about it.

But today I upgraded from 1.6.10 to 1.6.12 via the web ui - and once again Aegis would not re-start (even though the upgrade/restart dialog showed success with no errors). The Aegis status on the web ui showed the shield was down, but I think Aegis-info showed everything running. Perhaps this is the intended behavior and a manual restart is required (even though I thought the update dialog includes restart?). Restarting from the router console did not seem to fix the problem. I was able to restart Aegis from the web ui and all is good now.

I apologize for not having better information - Aegis has been so dependable for me that I haven't been paying much attention and didn't think this may be a problem with Aegis (and perhaps it isn't). I will be more watchful the next time I have an opportunity to upgrade.

BL

jrbmw · Feb 24, 2021

This is what I get

root@R7800:/$
root@R7800:/$ aegis unset
wget -qO- https://raw.githubusercontent.com/bolemo/aegis/beta/aegis >/opt/bolemo/scripts/aegis
^@wget -qO- https://raw.githubusercontent.com/bolemo/aegis/beta/aegis.htm >/opt/bolemo/www/aegis.htm
^@wget -qO- https://raw.githubusercontent.com/bolemo/aegis/beta/aegis_web.cgi >/opt/bolemo/www/cgi-bin/aegis_web.cgi
^@aegis uproot@R7800:/$ wget -qO- https://raw.githubusercontent.com/bolemo/aegis/beta/aegis >/opt/bolemo/scripts/aegis
root@R7800:/$ wget -qO- https://raw.githubusercontent.com/bolemo/aegis/beta/aegis.htm >/opt/bolemo/www/aegis.htm
root@R7800:/$ wget -qO- https://raw.githubusercontent.com/bolemo/aegis/beta/aegis_web.cgi >/opt/bolemo/www/cgi-bin/aegis_web.cgi
root@R7800:/$ aegis up
Problems:
- set: post-mount.sh is not set for aegis!
- iptables: current aegis rules were modified since last uprear!
Status:
- shield is up for: WAN interface (ppp0) and VPN tunnel (tun21).
- blocking a total of 619647669 IP addresses (global: 619647669, WAN only: 0, VPN only: 0).
- bypassing 0 IP addresses (global: 0, WAN only: 0, VPN only: 0).
- logging is disabled.
root@R7800:/$
root@R7800:/$

jrbmw · Feb 24, 2021

aegis gui disappeared. Tried to install from but nothing

root@R7800:/$
root@R7800:/$ aegis status
root@R7800:/$
root@R7800:/$ aegis upgrade
root@R7800:/$
root@R7800:/$ aegis web -install
root@R7800:/$
root@R7800:/$

Aegis Aegis (simple yet effective protection)

Very Senior Member

Regular Contributor

Very Senior Member

Regular Contributor

AEGIS​

Status @ 2021-02-24 15:57:44 (router time)​

Errors​

Very Senior Member

AEGIS​

Status @ 2021-02-24 15:57:44 (router time)​

Errors​

Regular Contributor

Very Senior Member

Regular Contributor

Very Senior Member

Regular Contributor

Very Senior Member

Regular Contributor

Very Senior Member

Regular Contributor

Regular Contributor

Very Senior Member

Very Senior Member

Senior Member

Regular Contributor

Regular Contributor

Similar threads

Support SNBForums w/ Amazon

Sign Up For SNBForums Daily Digest

AEGIS

Status @ 2021-02-24 15:57:44 (router time)

Errors

AEGIS

Status @ 2021-02-24 15:57:44 (router time)

Errors