Release Asuswrt-Merlin 386.6 is now available for select models

[Martineau]

No, it installs fine, but then “unbound not running, error in installed entware package list”
plus
/jffs/addons/unbound/unbound_manager.sh: line 5496: unbound-control: not found
| Requirements: USB drive with Entware installed |

entware IS installed by Diversion and working

As this is an addon related issue, please open a new thread in the Addons forum.

Please issue

which opkg

which unbound-control

head -n 5 /opt/var/lib/unbound/unbound.conf

Please use the following to start unbound_manager

/jffs/addons//unbound/unbound_manager.sh debug

then recreate the error, then either PM me the resulting debug trace output or post in the new thread.

 

[visortgw]

@RMerlin I just noticed that there is no button on the LAN — Switch Control page for GT-AX6000 to enable/disable Jumbo Frame. Can you please look into this as you continue to work through 386.7 development? Thanks.

 

[RMerlin]

@RMerlin I just noticed that there is no button on the LAN — Switch Control page for GT-AX6000 to enable/disable Jumbo Frame. Can you please look into this as you continue to work through 386.7 development? Thanks.

This is by design. Asus have marked this device as not supporting Jumbo Frame, so the option is hidden.

 

[visortgw]

This is by design. Asus have marked this device as not supporting Jumbo Frame, so the option is hidden.

Thanks. It seems a bit ironic that a device with both 2.5 Gbps WAN and LAN ports would not support Jumbo Frame.

 

[gattaca]

^^ Indeed - interesting... very!

 

[RMerlin]

Thanks. It seems a bit ironic that a device with both 2.5 Gbps WAN and LAN ports would not support Jumbo Frame.

Could be a switch limitation, or something they haven't had time to implement yet. You'll have to ask them.

 

[visortgw]

Could be a switch limitation, or something they haven't had time to implement yet. You'll have to ask them.

No Jumbo Frame for GT-AX6000?!?

 

[Kabouter Plop]

Any plans for beta soon for ax88u received new update

 

[Wisiwyg]

Any plans for beta soon for ax88u received new update

Looks like it is on the way...

Merlin 386.7 alpha1 for AC68U

[ 386.7 alpha Build(s) ] Testing available build(s)

https://onedrive.live.com/?authkey=%21AJLLKAY%2D%2D4EBqDo&id=CCE5625ED3599CE0%211427&cid=CCE5625ED3599CE0 Available builds: RT-AC68U XT12 (May 25, 2022) - UPDATED: Merged with 386_48966 GPL. - UPDATED: haveged to 1.9.18. RT-AX56U (May 26. 2022) RT-AX58U (May 26. 2022) RT-AX88U (May 27...

www.snbforums.com

 

[Clark Griswald]

RMerlin Response regarding the limited release.

 

[Jon555]

@RMerlin I just noticed that there is no button on the LAN — Switch Control page for GT-AX6000 to enable/disable Jumbo Frame. Can you please look into this as you continue to work through 386.7 development? Thanks.

Just curious, what's your use case for it? I thought Jumbo Frames, even in their "heyday", offered marginal improvements at best and more often than not would cause more headaches than it was worth (and nowadays is not recommended to be used at all, especially with TSO, LSO, etc.).

 

[jacek024]

ASUS RT-AX58U is not supported anymore.?

 

[Deleted member 22229]

ASUS RT-AX58U is not supported anymore.?

Yes its supported Merlin is waiting on GPL code for many models could be a while.

 

[visortgw]

ASUS RT-AX58U is not supported anymore.?

Read up a few messages on this same thread!

 

[JGrana]

Copying from another website:

Thanks for the pointer to the nand_check github repo.

I compiled it and it works well showing Free/Used/Partial/Bad blocks in the NAND flash.

 

[visortgw]

@RMerlin Is Asus any closer to releasing new GPLs? They has posted a new firmware release for the GT-AX6000 using the same version as the GPL that you based the 386.7 alpha1 on for the RT-AC68U (i.e., v3.0.0.4.386.48823):

https://rog.asus.com/us/networking/rog-rapture-gt-ax6000-model/helpdesk_bios

 

[JDB]

I know it's uncouth to ask @RMerlin about future model inclusion and already we are lucky to have such a wide net of model support, but, given the ZenWiFi Pro XT12 is so closely related to the ZenWiFi Pro ET12 I wondered if that might be on the horizon?
It's the only model that fits my needs of dual 2.5G ports and 2.4/5/6Ghz WiFi on the market.

 

[John_]

I know it's uncouth to ask @RMerlin about future model inclusion and already we are lucky to have such a wide net of model support, but, given the ZenWiFi Pro XT12 is so closely related to the ZenWiFi Pro ET12 I wondered if that might be on the horizon?
It's the only model that fits my needs of dual 2.5G ports and 2.4/5/6Ghz WiFi on the market.

I see ASUS ZenWiFi Pro ET12 Firmware version 3.0.0.4.386.48823 was released today.
Just use the ASUS firmware. It could be 5-12 months after product release before there _may_ be a RMerlin release. No guarantees. It depends on ASUS GPL releases and model differences. See the GT-AX6000 and GT-AXE11000 releases for recent examples.

 

[MyPal]

SAMBA dialog box failure errors when performing operations in GUI. No failure on function.

 

[MyPal]

JFFS backup not functioning in GUI.