[Beta] Asuswrt-Merlin 380.65 Beta is now available

[netmik3]

My printers work again! Thanks!

 

[doczenith1]

Thanks, what else should I check? I have already ON the less secure apps option

Allow less secure apps: ON

I had an issue where I was not receiving the confirmation email. For kicks I tried entering my gmail address without the @gmail.com and it worked. My assumption was that by choosing Google as my provider that aiprotection was adding the @gmail.com internally. Give that a try and see if it works.

 

[kotofei21]

Good day to all ! I am sorry I do not know much English! but outlined the essence! in firmware 380.65 beta3 speed of 870 megabits and 550 Beta 4 only with difficulty! I asus 88u and is two gigabit channel! I understand that there few firmware testing to high speeds! I switched back to version 380.65 beta3 which gives the best performance as an AIDS test and in torrent client! It is my opinion, and not particularly interested in you but I believe that the router must run at gigabit speeds and not at 500 megabit!

 

[pkdick]

Hello Rmerlin,

I am the owner of an ASUS RT-AC56U: since the beta 3, once flashed all my wireless devices are losing their Internet Access (I can only log to the router where all parameters seem to be OK with a working internet connection). When I look my connection properties, I can see that I have an IP and a gateway according the router's setup (use of DHCP), but it is also indicated that there is no Internet Access... I tried to manually enter my provider's DNS without any luck...

I am sticking to beta2 where this problem does not occur... Thank you in advance for the support that you may bring.

 

[Wutikorn]

I am sticking to beta2 where this problem does not occur...

I assume you have tried Beta 4, right?

 

[netmik3]

I had an issue where I was not receiving the confirmation email. For kicks I tried entering my gmail address without the @gmail.com and it worked. My assumption was that by choosing Google as my provider that aiprotection was adding the @gmail.com internally. Give that a try and see if it works.

My email notifications have been funky too but working well again. Finding a bad site to test is hard but I just found one http://up.anv.bz/

 

[VVS]

In version 380.65_beta4 the problem described earlier is absent.
https://www.snbforums.com/threads/b...ta-is-now-available.36868/page-14#post-304754

 

[AndreiV]

(Still irk'd by that snapped out window on widescreen monitors)

I have a 1080p , 1920x1080 screen and see no issues with the GUI .

 

[AndreiV]

Hello Rmerlin,

I am the owner of an ASUS RT-AC56U: since the beta 3, once flashed all my wireless devices are losing their Internet Access (I can only log to the router where all parameters seem to be OK with a working internet connection)

I am sticking to beta2 where this problem does not occur... Thank you in advance for the support that you may bring.

Nobody else is reporting the issue .

Flash the latest beta 4 and carry out a factory reset. if you still see an issue.

 

[DeathAngel74]

I haven't posted in a while. I just wanted to say thanks for all of your time and effort, RMerlin. The last stable build I could use on my RT-AC3100 was 380.63_2. That's changed now and all of my devices connect via wifi and maintain their connections with 365 beta_4. Thanks again....

 

[ViRUS2k]

Rmerlin, m8 my RT_AC88U has both those options....

i must have the same revision as you, i can see temps for 2.4/5/andcpu aswell as tx power slider for 2.4 and 5 on beta 4 here.

 

[cybrnook]

I have a 1080p , 1920x1080 screen and see no issues with the GUI .

Correct, that is not a widescreen monitor. I have a 34" 3440x1440 monitor and the gui pops out (screenshot is from earlier beta3 (and previous releases) on page 15, but also still present. Has been there for some time):

 

[taffeys]

Correct, that is not a widescreen monitor. I have a 34" 3440x1440 monitor and the gui pops out (screenshot is from earlier beta3 (and previous releases) on page 15, but also still present. Has been there for some time):

I am on an RT-AC3100 also. My display is also a 34" 3440x1440 monitor connected via Displayport. I have not seen any issues like you show. I would suspect it's not a problem with the router/firmware. Are you running the latest display driver?

 

[cybrnook]

I am on an RT-AC3100 also. My display is also a 34" 3440x1440 monitor connected via Displayport. I have not seen any issues like you show. I would suspect it's not a problem with the router/firmware. Are you running the latest display driver?

It only happens in Chrome. Firefox and IE are both fine.

 

[Wutikorn]

It only happens in Chrome. Firefox and IE are both fine.

Have you tried zooming in/out? Sometimes 10% zoom in fixes that problem.

 

[taffeys]

It only happens in Chrome. Firefox and IE are both fine.

I use Chrome 99% of the time and IE 11 1%. Never seen your problem on any of my PCs.

 

[cybrnook]

Geez, okay okay I tap out. It's only me I assume you also are on a 21:9 3440x1440 monitor (devil is in the details) with chrome in fullscreen?

 

[VancityUser]

I just upgraded to 380.65 beta 4 (RT-AC68U) from beta 3, 2, and 1. On 5Ghz using beta 3 I had frequent disconnects using Wifi. Am I imagining this or was there something in the firmware that could have affected this?

Chris

 

[taffeys]

Geez, okay okay I tap out. It's only me I assume you also are on a 21:9 3440x1440 monitor (devil is in the details) with chrome in fullscreen?

Yes. an LG 34UM95 @3440x1440 @60Hz on an AMD Radeon RX480.

 

[RMerlin]

Rmerlin, m8 my RT_AC88U has both those options....

i must have the same revision as you, i can see temps for 2.4/5/andcpu aswell as tx power slider for 2.4 and 5 on beta 4 here.

The power slider is only present on non-US regions.

As for temperatures, people with newer hardware revisions aren't seeing the 5 GHz temperature because they are most likely using a BCM4366E. Those are still quite uncommon however.