Beta 2, QoS still broken https://imgur.com/a/bb51edc
Beta 2, QoS still broken https://imgur.com/a/bb51edc
Yes, I tried with QoS OFF and the results aren't much different from the screenshots (except from random upload spikes up to 700/1500ms, but the average upload bufferbloat is still at 130-170ms)Have you already tried the test without activated QOS?
Beta 2, QoS still broken https://imgur.com/a/bb51edc
Don't use adaptive QoS, use traditional instead and see if that works for you.Yes, I tried with QoS OFF and the results aren't much different from the screenshots (except from random upload spikes up to 700/1500ms, but the average upload bufferbloat is still at 130-170ms)
I tried to limit the download/upload bandwith with different values but it's not making any difference, I get the same download upload whether I set it to 85/40 or 10/5.
I tried Traditional QoS but it cuts my download by 2/3.
Don't use adaptive QoS, use traditional instead and see if that works for you.
RT-AX56U
Upgraded to beta2 without problem
Issue:
- USB2 connector shows no device attached (USB3 connector works correctly)
Same, all is working as expected.Smooth update to refreshed 384.13_5 on 87u
Thanks RMerlin
Tools/Sysinfo: Firmware Build= Sun Mar 22 19:49:31 UTC 2020 merlin@acc9bd1 (the refreshed 384.13_5)
(Old 384.13_5 Firmware Build= Sat Mar 14 17:49:57 UTC 2020 merlin@d36a34a)
I've never bothered with the Adaptive QoS up to now.Have you tried the Adaptive QoS on your RT-AX56U? Is it correctly limiting your bandwith?
Enable Adaptive QoS, use Manual settings, select fq_codel and allocate 85/90% of your Download/Upload bandwith.I've never bothered with the Adaptive QoS up to now.
What's the easiest way to test if it is working?
Enabling Adaptive QoS doesn't seem to make any difference in download or upload speed. I could see no reduction in speeds with it enabled.Enable Adaptive QoS, use Manual settings, select fq_codel and allocate 85/90% of your Download/Upload bandwith.
Then you can run https://www.dslreports.com/speedtest
That's exactly my problem, QoS fails to limit the bandwith.Enabling Adaptive QoS doesn't seem to make any difference in download or upload speed. I could see no reduction in speeds with it enabled.
Beta 2, QoS still broken https://imgur.com/a/bb51edc
I swapped the values:You have the upload/download bandwidth configured the other way around. Swap the values
Welcome To SNBForums
SNBForums is a community for anyone who wants to learn about or discuss the latest in wireless routers, network storage and the ins and outs of building and maintaining a small network.
If you'd like to post a question, simply register and have at it!
While you're at it, please check out SmallNetBuilder for product reviews and our famous Router Charts, Ranker and plenty more!