[Fork] Asuswrt-Merlin on Broadcom MIPS RT-N series

[AndreyPopov]

Hi Andrey, any more progress with the 5ghz n53? I'm currently running your b version and the performance started to degrade...from ~10MBps to ~5 MBps on the 2.4. I want to flash something

I now work on mod8, but after 376.3602, 376.3626, 376.3677 many changes and typos.
now testing general compiling...

 

[RMerlin]

and typos.

I noticed this trend too with recent releases. Not sure why, sounds like there's been a lot of copy/paste being done, perhaps fixes getting manually backported from the 378 branch?

 

[fratzika]

Looking forward to testingand using your mod8, hope 5ghz will work so my net will be lightning fast

I am constantly refreshing your release page hope i don`t flood)

 

[AndreyPopov]

Looking forward to testingand using your mod8, hope 5ghz will work so my net will be lightning fast

I am constantly refreshing your release page hope i don`t flood)

5GHz on RT-N53 still no success. driver wl_high.ko compiled, started but with error and not add net interface.

 

[grenho]

5GHz on RT-N53 still no success.

Sorry to hear that. I'm hoping on a Christmas miracle

 

[tw39515]

rt-n10p

Originally Posted by tw39515
i tried flashing on the rt-n10p, seems functional. but it wont let me switch to ap the changes never stick. have you had much feedback on the n10p?
please write in thread.

I have my own rt-n10p.

are you make Reset to Factory Default after flash my mod?
i played around with it some more, if i set up ap mode on stock firmware and dirty flash your mod it works in ap mode fine but wont let me switch back and forth. if i flash your mod and factory reset it still wont stick on changing to ap mode. might try again when new release comes out. also almost all ram is used is that due to larger firmware with more features?

 

[AndreyPopov]

Sorry to hear that. I'm hoping on a Christmas miracle

miracle may be if some one help resolve this:
http://forums.smallnetbuilder.com/showthread.php?t=21451

I compile RT-N53 with wl_high (5G) driver. it start now without errors, showed in lsmod list - but not register USB Dongle, not up eth2 interface.

i played around with it some more, if i set up ap mode on stock firmware and dirty flash your mod it works in ap mode fine but wont let me switch back and forth. if i flash your mod and factory reset it still wont stick on changing to ap mode. might try again when new release comes out. also almost all ram is used is that due to larger firmware with more features?

I remember about this, but now hardly rework mod8.

 

[AndreyPopov]

i tried flashing on the rt-n10p, seems functional. but it wont let me switch to ap the changes never stick.
are you make Reset to Factory Default after flash my mod?

please check amount of NVRAM on Tools -> Sysinfo page?

 

[tw39515]

looks like nvram is 32

 

[AndreyPopov]

looks like nvram is 32

NVRAM usage 26k from 32k - normal

try mod7 or mod7a - without OpenVPN.

 

[tw39515]

will do, thanks

 

[sphinxstudios]

RT-N12C1

RT-N12C1_3.0.0.4_376_2769-g1bb5fac-m7c.trx Wifi Works but not WAN
doest connect to internet


http://imgur.com/G980iN4

 

[AndreyPopov]

RT-N12C1_3.0.0.4_376_2769-g1bb5fac-m7c.trx Wifi Works but not WAN
doest connect to internet

please show WAN page and Tools->Sysinfo

 

[vane]

Tried to install on Asus RT-10N with Asus Firmware Restoration tool. Got an error on 57% of uploading.

 

[AndreyPopov]

Tried to install on Asus RT-10N with Asus Firmware Restoration tool. Got an error on 57% of uploading.

all supported models in first post of this thread.


what's model RT-10N?

 

[vane]

Asus RT-10N rev C1
It has less flash memory?

 

[tw39515]

the RT-10N rev C1 only has 4mb of flash memory, which file were you trying to flash?

 

[vane]

Tried this.
ftp://78.25.8.242/pub/ASUS/ASUSWRT_MODDED/RT-N10U_3.0.0.4_376_1071-g8696125.trx

I see. I can not use this firmware.

 

[AndreyPopov]

Asus RT-10N rev C1
It has less flash memory?

Rt-10n c1 have 4 mb flash and main - chipset inside is Ralink!

 

[tw39515]

correct that file is almost double your flash memory size, i think there is a version of ddwrt that will work.