spdMerlin The future of spdMerlin

SomeWhereOverTheRainBow · Nov 18, 2020

QuikSilver said:
AutoBW: Automatically set QoS bandwidth using spdMerlin

AutoBW Automatically set QoS BandWidth Last Updated on 4/5/2020 to v1.5 Set QoS upload/download bandwidth using spdMerlin (via Ookla speedtests) Requires bc and spdMerlin (v3.3.2 or greater) Execute the following command to download: curl...

www.snbforums.com

Set QoS upload/download bandwidth using spdMerlin (via Ookla speedtests)

Welcome to the world of varying bandwidths(powered by ookla). Ookla is running an autobandwidth service and doesn't know it yet.....

doublehd · Nov 19, 2020

I received a status as the jpg after checked the amtm's update status(in fact i'm using the latest verion of spdmerlin 4.0).It doesn't bother me at all just for the feedback.
Is it normal by the way ?

Jack Yaz · Nov 19, 2020

doublehd said:
I received a status as the jpg after checked the amtm's update status(in fact i'm using the latest verion of spdmerlin 4.0).It doesn't bother me at all just for the feedback.
Is it normal by the way ?

Yes. 4.0.0 is not officially released and is in development

doublehd · Nov 19, 2020

Jack Yaz said:
Yes. 4.0.0 is not officially released and is in development

Glad to know about it,another great masterpiece,take care.

JT Strickland · Nov 19, 2020

Jack Yaz said:
That looks suspiciously like thr config file isn't loading. Can you please check for browser console errors? Also run option uf if you haven't already, there's a lot of regular changes on develop and you may be on one where I broke something

I would be glad to check for errors if I knew how. about all I can do is hit F12.

I did update uf, and it's still the same.
It shows that I am using the usb in amtm. It worked correctly before 4.0, or it ran and graphed the results.

system log says:
Nov 19 11:42:01 RT-AC86U-8F38 spdMerlin: No interfaces enabled, exiting

Slawek P · Nov 20, 2020

doublehd said:
I received a status as the jpg after checked the amtm's update status(in fact i'm using the latest verion of spdmerlin 4.0).It doesn't bother me at all just for the feedback.
Is it normal by the way ?

Yes as it checks for updates in master not development branch.

QuikSilver · Nov 20, 2020

@Jack Yaz I've noticed a few "blanks" within the Packet Loss results...not sure if it is a calculation, conversion, or what there....Noticed it on both routers so that would make me think issue is across the board??

Jack Yaz · Nov 20, 2020

QuikSilver said:
@Jack Yaz I've noticed a few "blanks" within the Packet Loss results...not sure if it is a calculation, conversion, or what there....Noticed it on both routers so that would make me think issue is across the board??
View attachment 27805

View attachment 27806

it's blank if the speedtest server you connect to doesn't report packet loss. not all speedtest servers support it, which is why i initially pushed back on adding this feature as I knew i would get questions like this!

SomeWhereOverTheRainBow · Nov 20, 2020

Jack Yaz said:
it's blank if the speedtest server you connect to doesn't report packet loss. not all speedtest servers support it, which is why i initially pushed back on adding this feature as I knew i would get questions like this!

Jack you did a great job in your implementation of this. I think you should keep it.

Jack Yaz · Nov 20, 2020

SomeWhereOverTheRainBow said:
Jack you did a great job in your implementation of this. I think you should keep it.

it's certainly staying now after the work to put in the "quality" graphs on top of the bandwidths!

SomeWhereOverTheRainBow · Nov 20, 2020

I hope every one wanting to show appreciation gets a chance to stop by this page.

Asuswrt-Merlin AddOn Developers Donation Links

AddOn developers create many useful scripts, WebUI addon pages, system extensions and useful utilities to enhance Asuswrt-Merlin supported routers. These "devs", like RMerlin, do this all voluntarily. This requires lots of time, effort, support of users, upkeep and maintenance. They do it for...

www.snbforums.com

Jack Yaz · Nov 21, 2020

JT Strickland said:
I would be glad to check for errors if I knew how. about all I can do is hit F12.

I did update uf, and it's still the same.
It shows that I am using the usb in amtm. It worked correctly before 4.0, or it ran and graphed the results.

system log says:
Nov 19 11:42:01 RT-AC86U-8F38 spdMerlin: No interfaces enabled, exiting

ok that means there's nothing selected in the auto speedtest section.

sorry, for console errors, hit F12 then click the Console tab, like below. Anything in red send a screenshot of please:

Jack Yaz · Nov 21, 2020

I think v4 is complete now, so development stopped to wait for reports from any develop users, before looking to release in a few days' time

Jack Yaz · Nov 21, 2020

Jack Yaz said:
I think v4 is complete now, so development stopped to wait for reports from any develop users, before looking to release in a few days' time

I found a few bugs which I ironed out. Now dev is frozen. Hopefully

EDIT: testing needed - ripped out loads of double quotes that aren't needed (bad practise on my part)

Jeffrey Young · Nov 22, 2020

Jack Yaz said:
Actually looks like jq is missing. Can you check by running

Code:

opkg install jq

please?

Hmmm, installing jq fixed my issue as well. I never could select a specific server.

Thanks

Boltum · Nov 26, 2020

Jack Yaz said:
View attachment 27551

Thank you for adding this feature! It's helped me with logging a case with my provider.

andresmorago · Jan 17, 2021

Hello.
Since a couple days, Im getting a ton of errors after selecting "choose a server" option. I have to stop the script with ctrl c and wait for a while in order to use it again since it locks the process.

Code:

####################################################################
##                       _  __  __              _  _              ##
##                      | ||  \/  |            | |(_)             ##
##       ___  _ __    __| || \  / |  ___  _ __ | | _  _ __        ##
##      / __|| '_ \  / _  || |\/| | / _ \| '__|| || || '_ \       ##
##      \__ \| |_) || (_| || |  | ||  __/| |   | || || | | |      ##
##      |___/| .__/  \__,_||_|  |_| \___||_|   |_||_||_| |_|      ##
##          | |                                                   ##
##          |_|                                                   ##
##                                                                ##
##                       v4.1.1 on RT-AC3100                      ##
##                                                                ##
##              https://github.com/jackyaz/spdMerlin              ##
##                                                                ##
####################################################################

Choose an interface to speedtest:

1.    All
2.    WAN
3.    VPNC3

Choose an option:    3

What mode would you like to use?

1.    Auto-select
2.    Preferred server
3.    Choose a server

Choose an option:    3

Generating list of closest servers for VPNC3...

/jffs/scripts/spdmerlin: line 2990: jq: not found
[: bad number
/jffs/scripts/spdmerlin: line 2990: jq: not found
/jffs/scripts/spdmerlin: line 2990: jq: not found
1)  |
[: bad number
/jffs/scripts/spdmerlin: line 2990: jq: not found
/jffs/scripts/spdmerlin: line 2990: jq: not found
2)  |
[: bad number
/jffs/scripts/spdmerlin: line 2990: jq: not found
/jffs/scripts/spdmerlin: line 2990: jq: not found
3)  |
[: bad number
/jffs/scripts/spdmerlin: line 2990: jq: not found
/jffs/scripts/spdmerlin: line 2990: jq: not found
4)  |
[: bad number
/jffs/scripts/spdmerlin: line 2990: jq: not found
/jffs/scripts/spdmerlin: line 2990: jq: not found
5)  |
[: bad number
/jffs/scripts/spdmerlin: line 2990: jq: not found
/jffs/scripts/spdmerlin: line 2990: jq: not found

Jeffrey Young · Jan 17, 2021

andresmorago said:

Hello.
Since a couple days, Im getting a ton of errors after selecting "choose a server" option. I have to stop the script with ctrl c and wait for a while in order to use it again since it locks the process.

Code:

####################################################################
##                       _  __  __              _  _              ##
##                      | ||  \/  |            | |(_)             ##
##       ___  _ __    __| || \  / |  ___  _ __ | | _  _ __        ##
##      / __|| '_ \  / _  || |\/| | / _ \| '__|| || || '_ \       ##
##      \__ \| |_) || (_| || |  | ||  __/| |   | || || | | |      ##
##      |___/| .__/  \__,_||_|  |_| \___||_|   |_||_||_| |_|      ##
##          | |                                                   ##
##          |_|                                                   ##
##                                                                ##
##                       v4.1.1 on RT-AC3100                      ##
##                                                                ##
##              https://github.com/jackyaz/spdMerlin              ##
##                                                                ##
####################################################################

Choose an interface to speedtest:

1.    All
2.    WAN
3.    VPNC3

Choose an option:    3

What mode would you like to use?

1.    Auto-select
2.    Preferred server
3.    Choose a server

Choose an option:    3

Generating list of closest servers for VPNC3...

/jffs/scripts/spdmerlin: line 2990: jq: not found
[: bad number
/jffs/scripts/spdmerlin: line 2990: jq: not found
/jffs/scripts/spdmerlin: line 2990: jq: not found
1)  |
[: bad number
/jffs/scripts/spdmerlin: line 2990: jq: not found
/jffs/scripts/spdmerlin: line 2990: jq: not found
2)  |
[: bad number
/jffs/scripts/spdmerlin: line 2990: jq: not found
/jffs/scripts/spdmerlin: line 2990: jq: not found
3)  |
[: bad number
/jffs/scripts/spdmerlin: line 2990: jq: not found
/jffs/scripts/spdmerlin: line 2990: jq: not found
4)  |
[: bad number
/jffs/scripts/spdmerlin: line 2990: jq: not found
/jffs/scripts/spdmerlin: line 2990: jq: not found
5)  |
[: bad number
/jffs/scripts/spdmerlin: line 2990: jq: not found
/jffs/scripts/spdmerlin: line 2990: jq: not found

Maybe jq got messed up. Try reinstalling jq. Happened to me once.

Code:

Opkg install jq

andresmorago · Jan 17, 2021

Jeffrey Young said:
Maybe jq got messed up. Try reinstalling jq. Happened to me once.

Code:

Opkg install jq

thanks! that fixed it

SomeWhereOverTheRainBow · Jan 17, 2021

andresmorago said:
thanks! that fixed it

This is a known issue a few have mentioned to jack. It seems if you uninstall a script that uses jq it will effectively render jq unavailable for spdmerlin. One script that uses jq is X3Mrouting, if this is removed jq gets removed. There may be other scripts that use jq as well but I haven't investigated. Ultimately it is up to script devs to maintain that dependencies are installed when required

Thread starter	Title	Forum	Replies	Date
	vnStat Exclude spdMerlin from vnStat reports	Asuswrt-Merlin AddOns	3	Aug 4, 2024
	Router Speed Test (spdMerlin)	Asuswrt-Merlin AddOns	5	Jul 15, 2024

spdMerlin The future of spdMerlin

Part of the Furniture

Regular Contributor

Attachments

Part of the Furniture

Regular Contributor

Very Senior Member

Senior Member

Very Senior Member

Part of the Furniture

Part of the Furniture

Part of the Furniture

Part of the Furniture

Part of the Furniture

Part of the Furniture

Part of the Furniture

Very Senior Member

New Around Here

Senior Member

Very Senior Member

Senior Member

Part of the Furniture

Similar threads

Similar threads

Support SNBForums w/ Amazon

Sign Up For SNBForums Daily Digest