[ 3006.102_4 alpha Build(s) ] available build(s)

[XIII]

I get PASS on all of them on the older firmware, maybe it's a setting? I do use AGH...

So do I, but I think that’s because I use NextDNS for DNS.

 

[MDM]

If you have a GN set with defaults settings, it will be on a different subnet, with a separate VLAN. In that case, redirecting to the main subnet IP will be problematic as you are trying to isolate that network from the main subnet.

Hmmm, nice to learn something new, thought that DNS was separate from the subnet IP question; simply did not think about how it was routed trough it.

 

[robinjoo1]

Wireless Log is now working on my GT-AX11000 Pro with the latest Alpha 2 build but it's only is displaying MAC addresses, no hostnames

yes same here

 

[MDM]

yes same here

No, you have host names just fine...

Or you mean your designated ones under LAN - DHCP Server (or under Network Map - Client List)? Works for me.

 

[robinjoo1]

No, you have host names just fine...

Or you mean your designated ones under LAN - DHCP Server (or under Network Map - Client List)? Works for me.

i have 1 static ip for my ps5

here is the rest

 

[MDM]

i have 1 static ip for my ps5

here is the rest

And you have host name (client name) just fine on both... Static IP has nothing to do with it.
So where is the issue? Can you edit (change) the names by clicking on them, and that it sticks everywhere?

 

[Calkulin]

My GT-AX11000 Pro does not show hostnames at all and a lot are missing IP addresses on the 5Ghz radio for some reason.

As a side note too, Aura RGB is still turning on after a reboot. I'm not setting the Enable LEDs to disable as I want the regular LEDs on, just not the Aura RGBs and after every reboot, Aura RGB is turning back on and needs to be disabled via the button every time. Is this expected and normal behaviour now for 3006?

 

[MDM]

My GT-AX11000 Pro does not show hostnames at all and a lot are missing IP addresses on the 5Ghz radio for some reason.

As a side note too, Aura RGB is still turning on after a reboot. I'm not setting the Enable LEDs to disable as I want the regular LEDs on, just not the Aura RGBs and after every reboot, Aura RGB is turning back on and needs to be disabled via the button every time. Is this expected and normal behaviour now for 3006?

Tried another browser (or just clear cache/cookies, turn of Somme add-on)?

Yes, AURA turns on with LED, do think it is all or none.

 

[NiklasO]

As a side note too, Aura RGB is still turning on after a reboot. I'm not setting the Enable LEDs to disable as I want the regular LEDs on, just not the Aura RGBs and after every reboot, Aura RGB is turning back on and needs to be disabled via the button every time. Is this expected and normal behaviour now for 3006?

Noticed the same thing. I would like to have LEDs enabled and Aura off.
I turn the leds off with the button on the router, doing that I can see if the router has rebooted for any reason as the leds will be on.

Also I see 0 clients connected to my guest network, IoT etc even with clients connected (I do see them in System Log - Wireless Log).
Edit: Ok, I see them. It gets confused when I have the same mac binding set via LAN - "Manually Assigned IP"
GT-AX6000

 

[robinjoo1]

And you have host name (client name) just fine on both... Static IP has nothing to do with it.
So where is the issue? Can you edit (change) the names by clicking on them, and that it sticks everywhere?

edit the hostname of my phone
it does show at network map

but not at wireless log the updated version/name

 

[MDM]

edit the hostname of my phone
it does show at network map
but not at wireless log the updated version/name

Tried to reconnect device?

 

[robinjoo1]

Tried to reconnect device?

just did still the same

 

[visortgw]

Guest wifi still broken:
- unable to get internet access if DNS set to "default". Manually setting routers private IP, doesn't solve. Have to manually assign a DNS.
- when schedule is set (for example turn on on weekends), when on week days, all bands are off except 5ghz band on main router which is on but without internet access.

Check post #133 in this thread.

 

[MDM]

just did still the same
View attachment 64581

I have DHCP reservation on the LAN page with name changed there, so don't know...
Because it says client name on Client List page, and host name on LAN page; so probably not the same...

 

[bennor]

Guest wifi still broken:
- unable to get internet access if DNS set to "default". Manually setting routers private IP, doesn't solve. Have to manually assign a DNS.
- when schedule is set (for example turn on on weekends), when on week days, all bands are off except 5ghz band on main router which is on but without internet access.

Do you have the Guest Network Pro's preset option Use same subnet as main network set to off/disabled? If so you typically will have to assign DNS servers in the Advanced Settings for the Guest Network Pro preset selection.

 

[Morpheus2020]

My GT-AX11000 Pro does not show hostnames at all and a lot are missing IP addresses on the 5Ghz radio for some reason.

As a side note too, Aura RGB is still turning on after a reboot. I'm not setting the Enable LEDs to disable as I want the regular LEDs on, just not the Aura RGBs and after every reboot, Aura RGB is turning back on and needs to be disabled via the button every time. Is this expected and normal behaviour now for 3006?

View attachment 64578

Your router is in AP mode?

 

[Calkulin]

Tried another browser (or just clear cache/cookies, turn of Somme add-on)?

Yes, AURA turns on with LED, do think it is all or none.

It's not a caching issue, I've tried multiple computers and browsers just for the heck of it. As for the Aura RGB lights, on 3004, Aura stayed off if you rebooted, so something changed with the new firmware

Your router is in AP mode?

Yes

 

[bluepoint]

Many DCD errors has come back, here's one.

Mar 25 02:26:02 kernel: potentially unexpected fatal signal 11.
Mar 25 02:26:02 kernel: CPU: 1 PID: 10603 Comm: dcd Tainted: P O 4.19.183 #1
Mar 25 02:26:02 kernel: Hardware name: GTAX6000_50991 (DT)
Mar 25 02:26:02 kernel: pstate: 200f0010 (nzCv q A32 LE aif)
Mar 25 02:26:02 kernel: pc : 00000000f77659d8
Mar 25 02:26:02 kernel: lr : 0000000080808080
Mar 25 02:26:02 kernel: sp : 00000000fff5a080
Mar 25 02:26:02 kernel: x12: 0000000000000000
Mar 25 02:26:02 kernel: x11: 0000000000000000 x10: 000000000007e66c
Mar 25 02:26:02 kernel: x9 : 00000000f65fd008 x8 : 00000000000a387e
Mar 25 02:26:02 kernel: x7 : 000000000000001d x6 : 0000000000000000
Mar 25 02:26:02 kernel: x5 : 00000000000a3884 x4 : 00000000fefefeff
Mar 25 02:26:02 kernel: x3 : 0000000000000000 x2 : 0000000000000000
Mar 25 02:26:02 kernel: x1 : 0000000000000107 x0 : 0000000000000000

I think I found what's causing my dcd errors. I had Guest Network 2.5 and 5 setup manually for some WPA2 hardware same as the previous stable firmware but these GN's is causing to dcd errors with this Alpha. When I turned them(GN) off the dcd stopped.

@RMerlin

 

[MDM]

As for the Aura RGB lights, on 3004, Aura stayed off if you rebooted, so something changed with the new firmware

Yes it is a known fact. RMerlin mentioned it also in this thread...

 

[Calkulin]

Yes it is a known fact. RMerlin mentioned it also in this thread...

I must of missed that comment