[384.14_Alpha - builds] Testing all variants.

[Sonyrolfy]

Dirty upgrade RT-86U to alpha 2 from 384.13. All working fine! Except for the DHCP list as mentioned above. Thank you sir!

 

[RMerlin]

The DHCP list is working fine for me. I will need to see the error message from your browser console to determine what is going on.

 

[RMerlin]

RT-AC66U_B1 upgraded to the Alpha 2. Seems to run well but am not seeing the DHCP reserved list in Edge and Chrome.
Yesterday I transferred some large files from a wired PC to my NAS. Noticed in the Traffic Monitor on Daily that the internal transfer was recorded which blew away the graph display. Don't think the internal, wired and WIFI should be displayed in the traffic monitor.

Disable hardware acceleration for accurate bandwidth tracking.

 

[DonnyJohnny]

The DHCP list is working fine for me. I will need to see the error message from your browser console to determine what is going on.

Are u able to see the dhcp list in mobile browser in android or iOS.
Coz I can’t see it. Only see it in desktop browser.

In mobile browser, need to click drop list to see those manual ip we set.

 

[Sonyrolfy]

The DHCP list is working fine for me. I will need to see the error message from your browser console to determine what is going on.

How do i do that? and where to send to?

 

[Deleted member 22229]

No DHCP list at all with Edge win10. Stock firmware there are no issues.

 

[RMerlin]

How do i do that? and where to send to?

In most browsers you press F12, go to the Console tab, then reload the page. If there is an error it will tell you the line - click on it to see what's on that line.

No DHCP list at all with Edge win10. Stock firmware there are no issues.

Can't be compared, my DHCP page renders the table in a completely different way because it's sortable and also it has an extra hostname field.

re u able to see the dhcp list in mobile browser in android or iOS.

Works on desktop, but not on mobile Chrome. However mobile Chrome doesn't have an error console, so it's impossible to tell what's wrong there.

 

[Sonyrolfy]

In most browsers you press F12, go to the Console tab, then reload the page. If there is an error it will tell you the line - click on it to see what's on that line.

Hope it helps.

jquery.js:5 [Deprecation] Synchronous XMLHttpRequest on the main thread is deprecated because of its detrimental effects to the end user's experience. For more help, check https://xhr.spec.whatwg.org/.
send @ jquery.js:5
ajax @ jquery.js:5
nvramGet @ httpApi.js:58
faqURL @ httpApi.js:445
initial @ Advanced_DHCP_Content.asp:69
onload @ Advanced_DHCP_Content.asp:665
jquery.js:5 Cross-Origin Read Blocking (CORB) blocked cross-origin response https://www.asus.com/support/FAQ/10...929051061020653_1570742671735&_=1570742671736 with MIME type text/html. See https://www.chromestatus.com/feature/5629709824032768 for more details.
send @ jquery.js:5
ajax @ jquery.js:5
faqURL @ httpApi.js:475
initial @ Advanced_DHCP_Content.asp:69
onload @ Advanced_DHCP_Content.asp:665

 

[bluepoint]

No DHCP list at all with Edge win10. Stock firmware there are no issues.

Works fine here with Chromium Edge Dev in W10.

 

[RMerlin]

Sorry, it doesn't show any error message, just warnings.

 

[RMerlin]

I can finally reproduce it in Edge Dev. No Javascript error, but at least I have a test case to reproduce it now.

EDIT: happens if you don't already have a sort method set, as the list doesn't get sorted at all instead of sorting it by default order. Unsorted list = an empty list.

 

[Sonyrolfy]

Its unsorted in my setup. Will try to sort. Thanks!

 

[greggy101]

If anyone was able to compile an alpha 2 build for AX88U with samba fix - please share it. Thanks!

 

[Deleted member 22229]

EDIT: happens if you don't already have a sort method set, as the list doesn't get sorted at all instead of sorting it by default order. Unsorted list = an empty list.

So why bother with sorting it don't really matter anyway. Your sorting flips the list anyway putting the last first.

 

[RMerlin]

So why bother with sorting it don't really matter anyway. Your sorting flips the list anyway putting the last first.

Because the sort function is what takes the data object that Asus generates, and builds an array that can be rendered in a table. If the sort code isn't called, then the table render display has no data array to render, hence the empty list. This is what the current bug is about - the function was only called when the cookies were present.

It's all on Github.

 

[Delusion]

Because the sort function is what takes the data object that Asus generates, and builds an array that can be rendered in a table. If the sort code isn't called, then the table render display has no data array to render, hence the empty list. This is what the current bug is about - the function was only called when the cookies were present.

It's all on Github.

Thanks for the fix. Compiled with the commit and now the table shows fine

 

[zorax222]

Regarding DHCP - here is my console log. I don't know how to use the "sort" on the DHCP table. Please disregard this post if the problem is solved.

Spoiler: DHCP Log from Console - Firefox

Loading failed for the <script> with source “blob:http://192.168.100.1/98aadaa9-6cea-4c0e-94d0-9e7c3255ca10”. 192.168.100.1:1:1
Password fields present on an insecure (Main_Login.asp
Navigated to http://192.168.100.1/login.cgi
Navigated to http://192.168.100.1/index.asp
Synchronous XMLHttpRequest on the main thread is deprecated because of its detrimental effects to the end user’s experience. For more help http://xhr.spec.whatwg.org/ jquery.js:5:17962
Synchronous XMLHttpRequest on the main thread is deprecated because of its detrimental effects to the end user’s experience. For more help http://xhr.spec.whatwg.org/ jquery.js:5:17962
Navigated to http://192.168.100.1/Advanced_LAN_Content.asp
Navigated to http://192.168.100.1/Advanced_DHCP_Content.asp
Synchronous XMLHttpRequest on the main thread is deprecated because of its detrimental effects to the end user’s experience. For more help http://xhr.spec.whatwg.org/ jquery.js:5:17962
The script from “https://www.asus.com/support/FAQ/10...409919394051443_1570797251440&_=1570797251441” was loaded even though its MIME type (“text/html”) is not a valid JavaScript MIME type.
Advanced_DHCP_Content.asp
The script from “http://192.168.100.1/require/modules/diskList.js” was loaded even though its MIME type (“text/html”) is not a valid JavaScript MIME type.
Advanced_DHCP_Content.asp
The script from “http://192.168.100.1/help_content.js” was loaded even though its MIME type (“text/html”) is not a valid JavaScript MIME type.
Advanced_DHCP_Content.asp
Navigated to http://192.168.100.1/
Navigated to http://192.168.100.1/Main_Login.asp
Loading failed for the <script> with source “blob:http://192.168.100.1/3344ae96-97bc-4d15-a482-4ee781cde31a”. 192.168.100.1:1:1
Password fields present on an insecure (Main_Login.asp

 

[TheOldMan]

making all in tools...
make[7]: Entering directory '/home//asuswrt-merlin.ng/release/src/router/openssl-1.0/tools'
make[7]: Nothing to be done for 'all'.
make[7]: Leaving directory '/home//asuswrt-merlin.ng/release/src/router/openssl-1.0/tools'
Cannot create directory /etc/ssl/man: Permission denied
make[6]: *** [Makefile:642: install_docs] Error 13
make[6]: Leaving directory '/home//asuswrt-merlin.ng/release/src/router/openssl-1.0'
make[5]: *** [Makefile:8046: openssl-install] Error 2
make[5]: Leaving directory '/home//asuswrt-merlin.ng/release/src/router'
make[4]: *** [Makefile:30: router_all] Error 2
make[4]: Leaving directory '/home//asuswrt-merlin.ng/release/src-rt-5.02hnd/userspace'
make[3]: *** [make.hndrt:211: userspace] Error 2
make[3]: Leaving directory '/home//asuswrt-merlin.ng/release/src-rt-5.02hnd'
make[2]: *** [make.hndrt:19: parallel_targets] Error 2
make[2]: Leaving directory '/home//asuswrt-merlin.ng/release/src-rt-5.02hnd'
make[1]: *** [Makefile:4292: bin] Error 2
make[1]: Leaving directory '/home//asuswrt-merlin.ng/release/src-rt-5.02hnd'
make: *** [Makefile:4437: rt-ac86u] Error 2

I'm having a problem with this compilation. 2/3 or more thru the build. Create directory yourself?

 

[Delusion]

making all in tools...
make[7]: Entering directory '/home//asuswrt-merlin.ng/release/src/router/openssl-1.0/tools'
make[7]: Nothing to be done for 'all'.
make[7]: Leaving directory '/home//asuswrt-merlin.ng/release/src/router/openssl-1.0/tools'
Cannot create directory /etc/ssl/man: Permission denied
make[6]: *** [Makefile:642: install_docs] Error 13
make[6]: Leaving directory '/home//asuswrt-merlin.ng/release/src/router/openssl-1.0'
make[5]: *** [Makefile:8046: openssl-install] Error 2
make[5]: Leaving directory '/home//asuswrt-merlin.ng/release/src/router'
make[4]: *** [Makefile:30: router_all] Error 2
make[4]: Leaving directory '/home//asuswrt-merlin.ng/release/src-rt-5.02hnd/userspace'
make[3]: *** [make.hndrt:211: userspace] Error 2
make[3]: Leaving directory '/home//asuswrt-merlin.ng/release/src-rt-5.02hnd'
make[2]: *** [make.hndrt:19: parallel_targets] Error 2
make[2]: Leaving directory '/home//asuswrt-merlin.ng/release/src-rt-5.02hnd'
make[1]: *** [Makefile:4292: bin] Error 2
make[1]: Leaving directory '/home//asuswrt-merlin.ng/release/src-rt-5.02hnd'
make: *** [Makefile:4437: rt-ac86u] Error 2

I'm having a problem with this compilation. 2/3 or more thru the build. Create directory yourself?

Me too. I tried creating the folder with permissions (sudo chmod -R a+wrx ..) and it works but then it fails on creating other folders .God knows how many folders you need to create... But if you run 'make' again after the fail , it somehow manages to complete the build.

 

[TheOldMan]

Me too. I tried creating the folder with permissions (sudo chmod -R a+wrx ..) and it works but then it fails on creating other folders .God knows how many folders you need to create... But if you run 'make' again after the fail , it somehow manages to complete the build.

I chowned the folders /etc/ssl/man/* to my user:user -R and the build completed without any issues or whines. Weird it didn't add anything to the man/ folder...