amtm amtm - the Asuswrt-Merlin Terminal Menu

[GoNz0]

@GoNz0 type 'r' while in the amtm menu and then exit your ssh session. This will reset amtm. Read what changes it does and take appropriate actions, if you need to.

Log back in and typing amtm will come up (be a little patient at this step, it is re-installing).

Don't forget to re-enable the disk checker (and the reboot scheduler afterward, if needed).

Thank you, I have done that and will try logging back in later to confirm it works, I think when I did that on the previous build I didn't log out!

 

[Rhialto]

There is somthing strange going on... I press U 2 times in a row and get different resuslts.

 amtm 3.1.2 FW             by thelonelycoder
 RT-AC1900P (armv7l) FW-384.15 @ 192.168.x.x
    The Asuswrt-Merlin Terminal Menu

 1  open     Diversion                 v4.1.9
 2  open     Skynet                    v7.1.0

 j5 open     uiDivStats                v1.3.1

 ep manage   Entware packages

 sw manage   Swap file /mnt/sda1 514.0M

 i  show     all available scripts or tools
 u  check    for script updates

    amtm options
 e  exit      t  theme   r  reset   a  about
_____________________________________________

 Enter option  u
 

 amtm 3.1.2 FW             by thelonelycoder
 RT-AC1900P (armv7l) FW-384.15 @ 192.168.x.x
    The Asuswrt-Merlin Terminal Menu

 1  open     Diversion     v4.1.9        -> v
 2  open     Skynet                    v7.1.0

 j5 open     uiDivStats                v1.3.1

 ep manage   Entware packages          no upd

 m  menu     amtm   uu  force update   v3.1.2
_____________________________________________

 Script update(s) available!
_____________________________________________

 Enter option  u
 

 amtm 3.1.2 FW             by thelonelycoder
 RT-AC1900P (armv7l) FW-384.15 @ 192.168.x.x
    The Asuswrt-Merlin Terminal Menu

 1  open     Diversion     v4.1.9     upd err
 2  open     Skynet                    v7.1.0

 j5 open     uiDivStats                v1.3.1

 ep manage   Entware packages          no upd

 m  menu     amtm          v3.1.2        -> v
_____________________________________________

 amtm  is now available!
 See https://diversion.ch for what's new.

 Do you want to update amtm now?
_____________________________________________

 Continue? [1=Yes e=Exit]

 

[L&LD]

@thelonelycoder and others, is the diversion.ch website down?

I can't seem to check for either amtm or Diversion updates right now.

Edit: Diversion comes up now (very slowly), but the amtm page times out.

 

[Asad Ali]

@thelonelycoder and others, is the diverson.ch website down?

I can't seem to check for either amtm or Diversion updates right now.

Edit: Diversion comes up now (very slowly), but the amtm page times out.

Working fine for me.

 

[Butterfly Bones]

@thelonelycoder and others, is the diverson.ch website down?

I can't seem to check for either amtm or Diversion updates right now.

Edit: Diversion comes up now (very slowly), but the amtm page times out.

Diversion.ch loads quickly for me. I did a "uu" in amtm and it finished in what I remember ad the same times as yesterday. Left coast US of A.

 

[L&LD]

Hmm... I connected to my home OpenVPN server and performed a 'uu' there and it is fast.

Both connections are using '1.1.1.1' and '1.0.0.1' for their WAN DNS options with DoT disabled.

Puzzling.

 

[Ro berto]

@thelonelycoder and others, is the diverson.ch website down?

It's down for me (in Germany)

It's working for me.

 

[L&LD]

@Ro berto does 'u' or 'uu' work in amtm for you?

 

[thelonelycoder]

@thelonelycoder and others, is the diverson.ch website down?

I can't seem to check for either amtm or Diversion updates right now.

Edit: Diversion comes up now (very slowly), but the amtm page times out.

diversion.ch is up, however, diverson.ch is not one of the many domains I own.

 

[L&LD]

@thelonelycoder thank you. That is a typo, of course.

The website seems to be working again, but 'u' or 'uu' in amtm shows min update for Diversion and Y for amtm after about 3 to 5 minutes of checking.

However, if I use OpenVPN to connect to my router at home, no updates are shown and the speed is normal.

 

[L&LD]

Edit: Actually, both Diversion and amtm come up with -> v (in red) now.

 

[thelonelycoder]

@thelonelycoder thank you. That is a typo, of course.

The website seems to be working again, but 'u' or 'uu' in amtm shows min update for Diversion and Y for amtm after about 3 to 5 minutes of checking.

However, if I use OpenVPN to connect to my router at home, no updates are shown and the speed is normal.

My server is fine and far from overloaded.

 

[L&LD]

Thank you @thelonelycoder, it must be something local then.

 

[thelonelycoder]

Edit: Actually, both Diversion and amtm come up with -> v (in red) now.

Then give it a break, THERE ARE NO UPDATES for amtm and Diversion.

 

[L&LD]

Sorry, I'm not pushing for updates from either. It is failing from here and it keeps giving different responses.

Right now it is showing this. But I give up on this router right now.

 

[zichichi]

if I try to start amtm the terminal returns me this error: -sh:/jffs/scripts/amtm: not found

Firmware 384.15 on rt-ac86u

 

[L&LD]

@zichichi

try just typing in amtm.

 

[zichichi]

@zichichi

try just typing in amtm.

Same error Edit: sorry L&LD, my last post was incorrect. I type amtm

 

[Asad Ali]

if I try to start amtm the terminal returns me this error: -sh:/jffs/scripts/amtm: not found

Firmware 384.15 on rt-ac86u

Run "unalias amtm"
Restart the SSH session and try again.

 

[L&LD]

And if @Asad Ali tip doesn't work, run unalias amtm and then type amtm, then, follow the instructions here.

https://www.snbforums.com/threads/amtm-the-asuswrt-merlin-terminal-menu.42415/page-84#post-549517