Beta Asuswrt-Merlin 3006.102.2 Beta is now available for Wifi 7 devices

[Blacklistedcard]

Just bought the BE98Pro and put the beta firmware on it. Moved my AX88 to the other side of the house in AI Mesh. Works great no issue(s) like my trusty AX88 when it was the main AP. Nice to have 2.5gig going to the rogers modem.

Some point in time I will do the MLO setup.

 

[fka]

No. That`s Asus' to investigate and/or fix.

Asus support sent me RT-AX88U_PRO_3.0.0.6_102_35853-g5ee6803_441-g8b5e0_nand_squashfs.pkgtb for the AX88U Pro
Still no joy getting getting the IPTV working so the BE88U is going back.

Thanks again Merlin. You and asuswrt-merlin are the reason I've stuck with this kit for last last 10 years!

 

[RMerlin]

Here you go..first thing I did was to re-enable detailed logging after clearing the log. Then I disabled the IoT network, and tried to access the internet on my browser. When that finally timed out, I saved the log.

Hope this helps.

Asus's engineer reworked my initial patch to address things at a lower level. Can you test this build please?

RT-BE96U_3006_102.2_beta2-g157580b179_nand_squashfs.pkgtb

 

[RogerSC]

Asus's engineer reworked my initial patch to address things at a lower level. Can you test this build please?

RT-BE96U_3006_102.2_beta2-g157580b179_nand_squashfs.pkgtb

Giving this build a shot. Flashed it and turned off IoT network, still had internet on remaining networks. Toggled the IoT network switch a couple of times, just to be sure that the first time wasn't a fluke. Worked consistently. No problems yet.

The only caveat is that I've turned on MLO since I saw this problem before. Shouldn't have any effect, but thought that I should mention that.

Anyways, looks good. I'm continuing to use this new build, until I have reason not to. Nice to be able to turn off the IoT network, since I'm not using it.

 

[RMerlin]

Giving this build a shot. Flashed it and turned off IoT network, still had internet on remaining networks. Toggled the IoT network switch a couple of times, just to be sure that the first time wasn't a fluke. Worked consistently. No problems yet.

Ok, thanks for the confirmation.