Oh, i had the CloudDisk switch ON, is it related to? 2-3 years ago i had an external HDD attached. I set it to OFF
Aug 13 23:48:14 rc_service: httpd 892:notify_rc restart_webdav
Aug 13 23:48:15 WEBDAV_Server: daemon is stopped
Aug 13 23:48:15 miniupnpd[1723]: shutting down MiniUPnPd
Aug 13 23:48:16 miniupnpd[21806]: HTTP listening on port 44886
Aug 13 23:48:16 miniupnpd[21806]: Listening for NAT-PMP/PCP traffic on port 5351
Yes, tho it shouldn't be crashing, so something might be broken there.
I don't have a github account, if it's easy and free i'll do it tomorrow.
Reset to factory the DSL-AC68U, then connect it via Ethernet to the master nodes and search again for other node front eh web UI of the master.
Just opened the ticket #235, i hope the description is clear enough!
I've done it like 10 times... before and after your message. Nothing.
hey TrebleTA,
Yes that should do it, and better to redo setting due to change in firmware, that maybe saved after a update that could be incompatible, so always best when changing from offical to merlin to redo all setting again after a at least a web ui factory reset (soft reset) with Initialize ticked.
www.snbforums.com
Let me pls get some help here before. I'm a little bit lazy to fill the issue template.
Let me pls get some help here before. I'm a little bit lazy to fill the issue template.
I get to the part where my master router recognise the node, but it does via wifi (even if it's actually wired). So when it gets to the 1% there is that error message "Unable to add you aimesh node [...]", like in this videoÑ:I've read somewhere that if I wait like 15 seconds it turns into the ethernet connection mode, but that's not working for me.
I don't know what to do, because if I turn off the wifi pressing the button, then my master doesn't recognise the node at all.
PS: I've tried with different wires, in case the problem was there, and the same.
.Thanks for your suggestion, I did what you say, it still the same. Nothing. Just in case, my master is an RT-AC68U with the lastest @RMerlin firmware with another node (same model - wired). But this one... I feel like it's almost impossible. I could do it once in the past when DSL didn't any aimesh support by flashing something and make like if it was a RT-AC68U. But now nothing works, always found only by wifi (even if it's wired) and at 1%, dead.Not sure what value you will get from running @GNUton / Merlin firmware on your DSL-AC86U when you are simply using it as an AiMesh Node? [I use Asus stock firmware on my DSL-AC86U AiMesh Node] - but whichever - make sure that Wireless-WPS is turned ON in the Wireless Tab of the webui before you attempt to add the Node.
Some versions of the firmware on the Main Router will turn WPS on for you when adding a Node - but other's don't - so check that setting in case.
If you already have had WPS On for your attempts so far - then I have nothing to suggest other than giving latest Stock Firmware a go on the DSL-AC86U.
Good luck
EDIT: This stock firmware works for me
https://dlcdnets.asus.com/pub/ASUS/wireless/DSL-AC68U/FW_DSL_AC68U_300438647534.zip
Yes. I've done what you say. I've tried with your version, with the last version, with gnuton version... I've always made a factory reset after installing a new firmware... I don't know what else to do.
Welcome To SNBForums
SNBForums is a community for anyone who wants to learn about or discuss the latest in wireless routers, network storage and the ins and outs of building and maintaining a small network.
If you'd like to post a question, simply register and have at it!
While you're at it, please check out SmallNetBuilder for product reviews and our famous Router Charts, Ranker and plenty more!
