Beta Asuswrt-Merlin 386.8 Beta is out for specific models

[shabbs]

Beta 2 loaded on my two RT-AX88U APs this afternoon - filthy upgrade from Beta 1. No issues to report.

 

[RMerlin]

When we going to see some test builds for the rest of the models you support ?

See first post.

 

[heslo]

Flashed beta 2 over the top of beta 1 on my 88U no dramas

 

[Dedel66]

Beta2 dirty ^^^^ beta1: everything in best order!

THANKS @RMerlin !!!

 

[Deleted member 66328]

Running 386.8_alpha1-g2cf921ca3e on AX-88U dirty upgrade and been solid for two days - no issues to report.

 

[Dedel66]

Running 386.8_alpha1-g2cf921ca3e on AX-88U dirty upgrade and been solid for two days - no wifi issues so far.

Don' t you want to test beta2?

 

[Damit1]

Well, I downgraded the Beta2 to 386_5.2 which everything worked the best, my network is good with that SDK for sure.


Took about 30s to whole network to sync along.

@RMerlin thanks for the hard work, man!
I will sit this one out.

I hope you could mention me when next SDK/FW is out for Beta.

Thank you!

 

[Dedel66]

Beta2 dirty ^^^^ beta1: everything in best order!

THANKS @RMerlin !!!

I have mentioned following issues:
Unlike previous updates, the hard drive was not recognized this time. As always, I just left it on during the update. Here is the LOG after I unplugged and reconnected the hard drive:
Aug 10 10:34:22 kernel: blk_update_request: critical target error, dev sda, sector 2960
Aug 10 10:34:22 kernel: tntfs error (device sda, pid 0): ntfs_end_buffer_async_read(): Buffer I/O error, logical block 0x5c8.
Aug 10 10:34:22 kernel: blk_update_request: critical target error, dev sda, sector 2962
Aug 10 10:34:22 kernel: tntfs error (device sda, pid 19): ntfs_end_buffer_async_read(): Buffer I/O error, logical block 0x5c9.
Aug 10 10:34:22 kernel: blk_update_request: critical target error, dev sda, sector 2964
Aug 10 10:34:22 kernel: tntfs error (device sda, pid 19): ntfs_end_buffer_async_read(): Buffer I/O error, logical block 0x5ca.
Aug 10 10:34:22 kernel: blk_update_request: critical target error, dev sda, sector 2966
Aug 10 10:34:22 kernel: tntfs error (device sda, pid 19): ntfs_end_buffer_async_read(): Buffer I/O error, logical block 0x5cb.
Aug 10 10:34:22 kernel: tntfs error (device sda, pid 5007): ntfs_mft_record_map(): Failed to map page containing mft record 0x5bb (error 5).
Aug 10 10:34:22 kernel: tntfs error (device sda, pid 5007): ntfs_mft_record_map(): Failed with error code 5.
Aug 10 10:34:22 kernel: tntfs error (device sda, pid 5007): ntfs_read_locked_inode(): Failed (error 5). Marking corrupt inode 0x5bb as bad. Run ntfsck.
Aug 10 10:34:22 kernel: blk_update_request: critical target error, dev sda, sector 16784
Aug 10 10:34:22 kernel: tntfs error (device sda, pid 0): ntfs_end_buffer_async_read(): Buffer I/O error, logical block 0x20c8.
Aug 10 10:34:22 kernel: blk_update_request: critical target error, dev sda, sector 16786
Aug 10 10:34:22 kernel: tntfs error (device sda, pid 19): ntfs_end_buffer_async_read(): Buffer I/O error, logical block 0x20c9.
Aug 10 10:34:22 kernel: blk_update_request: critical target error, dev sda, sector 16788
Aug 10 10:34:22 kernel: tntfs error (device sda, pid 19): ntfs_end_buffer_async_read(): Buffer I/O error, logical block 0x20ca.
Aug 10 10:34:22 kernel: blk_update_request: critical target error, dev sda, sector 16790
Aug 10 10:34:23 kernel: blk_update_request: critical medium error, dev sda, sector 16784
Aug 10 10:34:23 kernel: blk_update_request: critical target error, dev sda, sector 16786


In this state, the USB LED lights up, but the USB "not connected" is displayed in the webgui.

Repairing device with windows AND health scanner of the router fixed it....

This was the first time I had issues with this USB-SSD....

 

[prosperot]

Dirty upgrade on my AX88U from latest alpha to beta 2,
All devices connected again, including my Google Nest. Both wired and Wireless Aimesh nodes AX58U work flawless.

This is the only error sofar, not sure if it is firmware related:

Aug 10 12:27:50 ovpn-server1[2778]: event_wait : Interrupted system call (code=4)
Aug 10 12:27:50 ovpn-server1[2778]: PLUGIN AUTH-PAM: Error signaling background process to exit: Connection refused (errno=111)

 

[DMcD-EMS-USMC]

Did a clean install Beta 2 GT-AXE16000 and upon reboot my SSD would be recognized by Time Machine but would not connect giving a MacOS error message stating that the drive is not supported. Did a clean install of the most current stock ASUS firmware and the SSD was recognized and connected without a hitch. I previously had a GT-AXE11000 with beta and release ASUS Merlin firmware and had no issues with installing the same external SSD using Time Machine. I understand the USB API's are not touched by Merlin so I am at a loss why the beta's for the GT-AXE16000 do not work with Time Machine. Any help on this issue would be greatly appreciated because I love Merlin's firmware-thanks Merlin.

 

[Deleted member 77025]

Dirty Beta1 -> Beta2

Errors after flashing:

Aug 10 16:22:11 kernel: CFGP2P-ERROR) wl_cfgp2p_find_ndev :  p2p inactive
Aug 10 16:22:11 kernel: CFG80211-ERROR) wl_add_remove_eventmsg : Get event_msgs error (-19)
May  5 07:05:03 kernel:   bcm963xx-pcie: Core [2] Enabled PCIE/UBUS Error Interrupts^M
May  5 07:05:03 kernel:   bcm963xx-pcie: Core [0] Enabled PCIE/UBUS Error Interrupts^M
May  5 07:05:03 kernel: CFG80211-ERROR) wl_setup_wiphy : Registering Vendor80211
May  5 07:05:03 kernel: CFG80211-ERROR) wl_cfg80211_add_virtual_iface : Recvd application provided mac address:0f:b3:zu:XX:ho:XX
May  5 07:05:04 kernel: CFG80211-ERROR) dhd_config_dongle : Dongle is already up
May  5 07:05:05 acsd: acsd_main_loop(1125): sync_id: 35769, status:1, misc.error/abort
Aug 10 16:23:18 kernel: CFG80211-ERROR) wl_cfg80211_change_station : WLC_SCB_AUTHORIZE sta_flags_mask not set
Aug 10 16:23:52 kernel: CFG80211-ERROR) wl_cfg80211_hostapd_sec : No WPSIE in beacon

EDIT:

Many Erros after reboot:

Aug 10 16:45:29 haveged: haveged: Stopping due to signal 15
Aug 10 16:45:29 kernel: ^[[0;33;41m[ERROR pktrunner] runnerUcast_inet6addr_event,187: Could not rdpa_system_ipv6_host_address_table_find ret=-5^[[0m
May  5 07:05:05 kernel: CFG80211-ERROR) wl_cfg80211_add_virtual_iface : Recvd application provided mac address:3c:XX:XX:53:82:34
May  5 07:05:05 acsd: eth6: Selecting 2g band ACS policy
May  5 07:05:05 wlceventd: wlceventd Start...
May  5 07:05:05 acsd: acsd_main_loop(1125): sync_id: 35769, status:1, misc.error/abort
May  5 07:05:05 acsd: acs_candidate_score_busy(951): eth6: busy check failed for chanspec: 0x1903 (5u)
May  5 07:05:05 acsd: acs_candidate_score_intf(1003): eth6: intf check failed for chanspec: 0x1903 (5u)
May  5 07:05:05 acsd: acs_candidate_score_bgnoise(1320): eth6: bgnoise check failed for chanspec: 0x1903 (5u)
May  5 07:05:05 acsd: acs_candidate_score_txop(1575): eth6: txop check failed for chanspec: 0x1903
May  5 07:05:05 acsd: acs_candidate_score_cns(1411): eth6: knoise check failed for chanspec: 0x1903
May  5 07:05:05 acsd: acs_candidate_score_busy(951): eth6: busy check failed for chanspec: 0x1904 (6u)

Spoiler: and so on....

May 5 07:05:05 acsd: acs_candidate_score_intf(1003): eth6: intf check failed for chanspec: 0x1904 (6u)
May 5 07:05:05 acsd: acs_candidate_score_bgnoise(1320): eth6: bgnoise check failed for chanspec: 0x1904 (6u)
May 5 07:05:05 acsd: acs_candidate_score_txop(1575): eth6: txop check failed for chanspec: 0x1904
May 5 07:05:05 acsd: acs_candidate_score_cns(1411): eth6: knoise check failed for chanspec: 0x1904
May 5 07:05:05 acsd: acs_candidate_score_busy(951): eth6: busy check failed for chanspec: 0x1905 (7u)
May 5 07:05:05 acsd: acs_candidate_score_intf(1003): eth6: intf check failed for chanspec: 0x1905 (7u)
May 5 07:05:05 acsd: acs_candidate_score_bgnoise(1320): eth6: bgnoise check failed for chanspec: 0x1905 (7u)
May 5 07:05:05 acsd: acs_candidate_score_txop(1575): eth6: txop check failed for chanspec: 0x1905
May 5 07:05:05 acsd: acs_candidate_score_cns(1411): eth6: knoise check failed for chanspec: 0x1905
May 5 07:05:05 acsd: acs_candidate_score_busy(951): eth6: busy check failed for chanspec: 0x1906 (8u)
May 5 07:05:05 acsd: acs_candidate_score_intf(1003): eth6: intf check failed for chanspec: 0x1906 (8u)
May 5 07:05:05 acsd: acs_candidate_score_bgnoise(1320): eth6: bgnoise check failed for chanspec: 0x1906 (8u)
May 5 07:05:05 acsd: acs_candidate_score_txop(1575): eth6: txop check failed for chanspec: 0x1906
May 5 07:05:05 acsd: acs_candidate_score_cns(1411): eth6: knoise check failed for chanspec: 0x1906
May 5 07:05:05 acsd: acs_candidate_score_busy(951): eth6: busy check failed for chanspec: 0x1907 (9u)
May 5 07:05:05 acsd: acs_candidate_score_intf(1003): eth6: intf check failed for chanspec: 0x1907 (9u)
May 5 07:05:05 acsd: acs_candidate_score_bgnoise(1320): eth6: bgnoise check failed for chanspec: 0x1907 (9u)
May 5 07:05:05 acsd: acs_candidate_score_txop(1575): eth6: txop check failed for chanspec: 0x1907
May 5 07:05:05 acsd: acs_candidate_score_cns(1411): eth6: knoise check failed for chanspec: 0x1907
May 5 07:05:05 acsd: acs_candidate_score_busy(951): eth6: busy check failed for chanspec: 0x1908 (10u)
May 5 07:05:05 acsd: acs_candidate_score_intf(1003): eth6: intf check failed for chanspec: 0x1908 (10u)
May 5 07:05:05 acsd: acs_candidate_score_bgnoise(1320): eth6: bgnoise check failed for chanspec: 0x1908 (10u)
May 5 07:05:05 acsd: acs_candidate_score_txop(1575): eth6: txop check failed for chanspec: 0x1908
May 5 07:05:05 acsd: acs_candidate_score_cns(1411): eth6: knoise check failed for chanspec: 0x1908
May 5 07:05:05 acsd: acs_candidate_score_busy(951): eth6: busy check failed for chanspec: 0x1909 (11u)
May 5 07:05:05 acsd: acs_candidate_score_intf(1003): eth6: intf check failed for chanspec: 0x1909 (11u)
May 5 07:05:05 acsd: acs_candidate_score_bgnoise(1320): eth6: bgnoise check failed for chanspec: 0x1909 (11u)
May 5 07:05:05 acsd: acs_candidate_score_txop(1575): eth6: txop check failed for chanspec: 0x1909
May 5 07:05:05 acsd: acs_candidate_score_cns(1411): eth6: knoise check failed for chanspec: 0x1909
May 5 07:05:05 acsd: acs_candidate_score_busy(951): eth6: busy check failed for chanspec: 0x1803 (1l)
May 5 07:05:05 acsd: acs_candidate_score_intf(1003): eth6: intf check failed for chanspec: 0x1803 (1l)
May 5 07:05:05 acsd: acs_candidate_score_bgnoise(1320): eth6: bgnoise check failed for chanspec: 0x1803 (1l)
May 5 07:05:05 acsd: acs_candidate_score_txop(1575): eth6: txop check failed for chanspec: 0x1803
May 5 07:05:05 acsd: acs_candidate_score_cns(1411): eth6: knoise check failed for chanspec: 0x1803
May 5 07:05:05 acsd: acs_candidate_score_busy(951): eth6: busy check failed for chanspec: 0x1804 (2l)
May 5 07:05:05 acsd: acs_candidate_score_intf(1003): eth6: intf check failed for chanspec: 0x1804 (2l)
May 5 07:05:05 acsd: acs_candidate_score_bgnoise(1320): eth6: bgnoise check failed for chanspec: 0x1804 (2l)
May 5 07:05:05 acsd: acs_candidate_score_txop(1575): eth6: txop check failed for chanspec: 0x1804
May 5 07:05:05 acsd: acs_candidate_score_cns(1411): eth6: knoise check failed for chanspec: 0x1804
May 5 07:05:05 acsd: acs_candidate_score_busy(951): eth6: busy check failed for chanspec: 0x1805 (3l)

will have an eye on it and maybe do a hard reset at weekend to see if this happens again.

 

[RMerlin]

Boot times warnings are perfectly normal, most of the cases are Linux drivers probing the hardware to determine if they should load (like the SFP+ driver), or hardware getting initialized.

ACS checks may be delayed due to the radio not being fully initialized yet (for instance if it`s currently in the middle of a DFS check, or the router hasn`t finished booting yet).

 

[vdemarco]

I just installed Beta2 (Working great) on my AX88U. I just noticed this on the Wifi Page i see this setting
"Auto select channel including U-NII-4 band"

Its turned off, should i turn it on? does it even apply to AX88U?

 

[RMerlin]

I just installed Beta2 (Working great) on my AX88U. I just noticed this on the Wifi Page i see this setting
"Auto select channel including U-NII-4 band"

Its turned off, should i turn it on? does it even apply to AX88U?

That setting does not apply to the RT-AX88U. Not sure why it`s showing up for you, it shouldn`t for that model. But then that`s a feature Asus were still working on recently, so it might not be fully implemented yet (including proper compatibility testing).

 

[shabbs]

I just installed Beta2 (Working great) on my AX88U. I just noticed this on the Wifi Page i see this setting
"Auto select channel including U-NII-4 band"

Its turned off, should i turn it on? does it even apply to AX88U?

Where are you seeing that? I'm not on my AX88U.

 

[Treadler]

I just installed Beta2 (Working great) on my AX88U. I just noticed this on the Wifi Page i see this setting
"Auto select channel including U-NII-4 band"

Its turned off, should i turn it on? does it even apply to AX88U?

Not seen here (Australia). Might be a region specific setting?

 

[vdemarco]

Where are you seeing that? I'm not on my AX88U.

Right here.

 

[RMerlin]

Not seen here (Australia). Might be a region specific setting?

Those channels are only available in the USA at this time.

 

[ASSAD]

Hello guys RMerlin how you doing

I have two zte MC7010 outdoor routers these router support 2.5Gbps ethernet and i have one ASUS GT-AXE16000 the two zte feeding the asus router with internet but i have weird problem on network map on system status don't know if you guys that having that problem too the problem is that sometime these two routers shows 100Mbps and sometime showing full 2.5Gbps the two not one of them and by the way i am using them with load balancing i attach the 3 photo's one on the asus stock factory firmware and the latest merlin beta2 and tried beta1 same problem maybe rmerlin will help and thank you for the incredible firmware's and supports rmerlin.

Maybe it needs fix for it it's bug i think. I disable all the following features: AiProtection, Traffic Analyzer, Web History, Adaptive QoS, Game boost, Web & apps filters, bandwidth monitor and everything is good i don't use wireless i disable them all even maybe in the future i use it.

I have disconnections even on the system log and there's second weird problem after disabled the wireless all bands the lights on asus router are on accept 5Ghz-2 are off i did a scan with a phone to see if the wireless are on but they are all disabled forget to mention these above i add more photo's.

Any suggestions will be appreciated thanks.

 

[Mutzli]

Beta 2 up for 2h. Everything works great, also no strange error messages in the log as some reported.
I'm not seeing the new selection for U-NII-4 band control channels, showing DFS channels only. (U.S. firmware)