Menu
What's new
By:
Filters Better Search

Stubby-Installer-Asuswrt-Merlin

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

Elmer said:
As soon as I remove the # from the two lines following "Quad 9 Secure Primary" and restart stubby, it dies. What am I doing wrong?

Code: 
upstream_recursive_servers:
# Quad 9 Secure Primary
#   - address_data: 9.9.9.9
#     tls_auth_name: "dns.quad9.net"
# Quad 9 Secure Primary
#   - address_data: 2620:fe::fe
#     tls_auth_name: "dns.quad9.net"
# Cloudflare Primary IPv4
  - address_data: 1.1.1.1
    tls_auth_name: "cloudflare-dns.com"
# Cloudflare Secondary IPv4
  - address_data: 1.0.0.1
    tls_auth_name: "cloudflare-dns.com"
# Cloudflare Primary IPv6
#  - address_data: 2606:4700:4700::1111
#    tls_auth_name: "cloudflare-dns.com"
# Cloudflare Secondary IPv6
#  - address_data: 2606:4700:4700::1001
#    tls_auth_name: "cloudflare-dns.com"
Click to expand...
Make sure the space count is the same before the dashes. It matters in YML.
 
Elmer said:
As soon as I remove the # from the two lines following "Quad 9 Secure Primary" and restart stubby, it dies. What am I doing wrong?

Code: 
upstream_recursive_servers:
# Quad 9 Secure Primary
#   - address_data: 9.9.9.9
#     tls_auth_name: "dns.quad9.net"
# Quad 9 Secure Primary
#   - address_data: 2620:fe::fe
#     tls_auth_name: "dns.quad9.net"
# Cloudflare Primary IPv4
  - address_data: 1.1.1.1
    tls_auth_name: "cloudflare-dns.com"
# Cloudflare Secondary IPv4
  - address_data: 1.0.0.1
    tls_auth_name: "cloudflare-dns.com"
# Cloudflare Primary IPv6
#  - address_data: 2606:4700:4700::1111
#    tls_auth_name: "cloudflare-dns.com"
# Cloudflare Secondary IPv6
#  - address_data: 2606:4700:4700::1001
#    tls_auth_name: "cloudflare-dns.com"
Click to expand...
Use "stubby -i" to validate your config file.
The following config file worked for me when I was testing.
Code: 
appdata_dir: "/opt/var/cache/stubby"
dns_transport_list:
  - GETDNS_TRANSPORT_TLS
idle_timeout: 1900
tls_authentication: GETDNS_AUTHENTICATION_REQUIRED
tls_ca_file: "/rom/etc/ssl/certs/ca-certificates.crt"
#
upstream_recursive_servers:
# Quad9 Primary IPv4
  - address_data: 9.9.9.9
    tls_auth_name: "dns.quad9.net"
# Quad9 Secondary IPv4
  - address_data: 149.112.112.112
    tls_auth_name: "dns.quad9.net"
# Quad9 Primary IPv6
  - address_data: 2620:fe::fe
    tls_auth_name: "dns.quad9.net"
# Quad9 Secondary IPv6
  - address_data: 2620:fe::9
    tls_auth_name: "dns.quad9.net"
#
listen_addresses:
  - 127.0.0.1@5453
  - 0::1@5453
#
 
Hi guys! Now I have a little bit different problem :D

I just updated entware packages, and there was also an update for the libssl..
Code: 
Upgrading libopenssl on root from 1.0.2p-1a to 1.1.1a-2...
Downloading http://bin.entware.net/armv7sf-k2.6/libopenssl_1.1.1a-2_armv7-2.6.ipk

Removing obsolete file /opt/lib/libssl.so.1.0.0.
Removing obsolete file /opt/lib/libcrypto.so.1.0.0.

Sadly this seems to crash the stubby installation:

Code: 
/tmp/home/root# stubby
stubby: error while loading shared libraries: libssl.so.1.0.0: cannot open shared object file: No such file or directory

Reinstallation attempt:
Code: 
Shutting down stubby...              done.
 Starting stubby...              done.
Warning! Unsuccesful installation of Stubby detected
Rerun install_stubby.sh and select the Remove option to backout changes

Using latest beta2 asuswrt. Anything I can do? :D
 
TheUntouchable said:
Hi guys! Now I have a little bit different problem :D

I just updated entware packages, and there was also an update for the libssl..
Code: 
Upgrading libopenssl on root from 1.0.2p-1a to 1.1.1a-2...
Downloading http://bin.entware.net/armv7sf-k2.6/libopenssl_1.1.1a-2_armv7-2.6.ipk

Removing obsolete file /opt/lib/libssl.so.1.0.0.
Removing obsolete file /opt/lib/libcrypto.so.1.0.0.

Sadly this seems to crash the stubby installation:

Code: 
/tmp/home/root# stubby
stubby: error while loading shared libraries: libssl.so.1.0.0: cannot open shared object file: No such file or directory

Reinstallation attempt:
Code: 
Shutting down stubby...              done.
 Starting stubby...              done.
Warning! Unsuccesful installation of Stubby detected
Rerun install_stubby.sh and select the Remove option to backout changes

Using latest beta2 asuswrt. Anything I can do? :D
Click to expand...

Go to Stubby menu and update the installer first (I think Option 3) then update your configuration (Option 1) and see what happens.


Sent from my iPhone using Tapatalk
 
Marin said:
Go to Stubby menu and update the installer first (I think Option 3) then update your configuration (Option 1) and see what happens.


Sent from my iPhone using Tapatalk
Click to expand...
I am already on the latest 1.1.0 version of the installer script.. :(
 
TheUntouchable said:
I am already on the latest 1.1.0 version of the installer script.. :(
Click to expand...

Yes but try to rerun those steps again in the order I mentioned to see if that resolves your issue (update installer first then configuration).


Sent from my iPhone using Tapatalk
 
Can't you just run "opkg remove libopenssl_1.1.1a-2" and then rerun stubby installer.
 
consorts said:
i read this article, and had a question for stubby users - just out of curiosity :p
https://www.businessinsider.com/paul-vixie-blasts-google-chromecast-2019-2
if a device specifically hard codes 8.8.8.8 will stubby encrypt it and it will simply
access 8.8.8.8 beyond your wan, or will it leak and your isp will be able to see it.
Click to expand...
If you chose to route all dns through stubby then the device contacts the router for dns as its first resolver. It will then try 8.8.8.8 but that to would be thwarted by the instruction to route all dns through stubby.
 
skeal said:
If you chose to route all dns through stubby then the device contacts the router for dns as its first resolver. It will then try 8.8.8.8 but that to would be thwarted by the instruction to route all dns through stubby.
Click to expand...
My understanding is:
  • If you are using DNSFilter Global Filter Mode Router, then the DNS lookup will use your dnsmasq and stubby. The lookup will be done by the provider configured in stubby.yml.
  • If you are not using DNSFilter, then the query will go directly from the Chromecast device to google's DNS server at 8.8.8.8
 
@Adamm @Xentrk There is something wrong with stubby since we started using DNSFilter. The best way to describe the problem ius to show you two different test results. One taken before disabling DNSFilter and one after.
This is a kdig query on an Ubuntu desktop.
Code: 
Ubuntu test before disabling dnsfilter setting


steve@LinuxUbuntu:~$ kdig -d @1.1.1.1 +tls-ca +dnssec +tls-host=cloudflare-dns.com  example.com
;; DEBUG: Querying for owner(example.com.), class(1), type(1), server(1.1.1.1), port(853), protocol(TCP)
;; DEBUG: TLS, imported 133 system certificates
;; WARNING: can't connect to 1.1.1.1@853(TCP)
;; WARNING: failed to query server 1.1.1.1@853(TCP)
steve@LinuxUbuntu:~$
Code: 
Ubuntu test after disabling the dnsfilter


steve@LinuxUbuntu:~$ kdig -d @1.1.1.1 +tls-ca +dnssec +tls-host=cloudflare-dns.com  example.com
;; DEBUG: Querying for owner(example.com.), class(1), type(1), server(1.1.1.1), port(853), protocol(TCP)
;; DEBUG: TLS, imported 133 system certificates
;; DEBUG: TLS, received certificate hierarchy:
;; DEBUG:  #1, C=US,ST=California,L=San Francisco,O=Cloudflare\, Inc.,CN=cloudflare-dns.com
;; DEBUG:      SHA-256 PIN: V6zes8hHBVwUECsHf7uV5xGM7dj3uMXIS9//7qC8+jU=
;; DEBUG:  #2, C=US,O=DigiCert Inc,CN=DigiCert ECC Secure Server CA
;; DEBUG:      SHA-256 PIN: PZXN3lRAy+8tBKk2Ox6F7jIlnzr2Yzmwqc3JnyfXoCw=
;; DEBUG: TLS, skipping certificate PIN check
;; DEBUG: TLS, The certificate is trusted.
;; TLS session (TLS1.3)-(ECDHE-SECP256R1)-(ECDSA-SECP256R1-SHA256)-(AES-256-GC
;; ->>HEADER<<- opcode: QUERY; status: NOERROR; id: 47411
;; Flags: qr rd ra ad; QUERY: 1; ANSWER: 2; AUTHORITY: 0; ADDITIONAL: 1

;; EDNS PSEUDOSECTION:
;; Version: 0; flags: do; UDP size: 1452 B; ext-rcode: NOERROR
;; PADDING: 25 B

;; QUESTION SECTION:
;; example.com.                IN    A

;; ANSWER SECTION:
example.com.            425    IN    A    93.184.216.34
example.com.            425    IN    RRSIG    A 8 2 86400 20190407212028 20190317211731 63195 example.com. YsnnzLA57y7ewUwLWMiWDmFpDJqVASZVlo4YT50bBz1Yk9RHnT1zNLH7Rv6io0T9wri9IsXP8YDXpBKVewO6pGipA6hzL9LTkc4xXF4PIfH7rOTAR1kAuCsz4O2wfe2iMqxCID/hkK3Va6F824Onne0tQvJEocciD9i9rLlbx8E=

;; Received 256 B
;; Time 2019-03-23 16:36:04 CST
;; From 1.1.1.1@853(TCP) in 80.6 ms
steve@LinuxUbuntu:~$
Clearly the first test shows a failure and the second a success. Any ideas what is going on here? Thanks for your help!
 
Last edited:
skeal said:
Clearly the first test shows a failure and the second a success. Any ideas what is going on here? Thanks for your help!
Click to expand...
Merlin 384.9 implemented a DoT forwarding filter in DNSFilter, depending on your chosen DNSFILTER mode. So in theory, the worst case is Stubby should still work on your router but DoT from a client will be blocked.

Check your DNSFILTER settings and iptables filter rules.
 
dave14305 said:
Merlin 384.9 implemented a DoT forwarding filter in DNSFilter, depending on your chosen DNSFILTER mode. So in theory, the worst case is Stubby should still work on your router but DoT from a client will be blocked.

Check your DNSFILTER settings and iptables filter rules.
Click to expand...
DoT Forwarding Filter??? Just looked through the change log for 384.9 and saw nothing about a DoT Forwarding Filter. Merlin will do DNSSEC but no DoT (without Stubby)
 
Odkrys said:
@Xentrk

Entware has been moved to openssl 1.1.1.
No need static binary anymore.
Thanks.
Click to expand...
I had done a fresh install of Entware and Stubby about 2 hours ago. Noticed the Openssl loaded up version 1.1.1a. Stubby is running like a champ!

Edit: Stubby now works with the valuse for TLS 1.3. I added this and restarted Stubby (using Cloudflare IPV4 resolvers):
Code: 
tls_ciphersuites: "TLS_AES_256_GCM_SHA384:TLS_CHACHA20_POLY1305_SHA256:TLS_AES_128_GCM_SHA256"

Here are the stubby.yml values for TLS:
Code: 
# Set the acceptable ciphers for DNS over TLS.  With OpenSSL 1.1.1 this list is
# for TLS1.2 and older only. Ciphers for TLS1.3 should be set with the
# tls_ciphersuites option. This option can also be given per upstream.
# tls_cipher_list: "EECDH+AESGCM:EECDH+CHACHA20"

# Set the acceptable cipher for DNS over TLS1.3. OpenSSL >= 1.1.1 is required
# for this option. This option can also be given per upstream.
# tls_ciphersuites: "TLS_AES_256_GCM_SHA384:TLS_CHACHA20_POLY1305_SHA256:TLS_AES_128_GCM_SHA256"

# Set the minimum acceptable TLS version. Works with OpenSSL >= 1.1.1 only.
# This option can also be given per upstream.
# tls_min_version: GETDNS_TLS1_2

# Set the maximum acceptable TLS version. Works with OpenSSL >= 1.1.1 only.
# This option can also be given per upstream.
# tls_max_version: GETDNS_TLS1_3
 
Last edited:
skeal said:
So you are saying it all works you just can't test with a client. If that is the case how the heck does a person know this is working?
Click to expand...
Well, the Cloudflare help still works. Same with the Cloudflare ENSI checker for browser support of TLS 1.3
 
bbunge said:
Well, the Cloudflare help still works. Same with the Cloudflare ENSI checker for browser support of TLS 1.3
Click to expand...
The ENSI page is a browser test. Cloudflare help doesn't work with strict DNSSEC anyway.
 
You must log in or register to reply here.

Similar threads

RMerlin
Release Asuswrt-Merlin 3006.102.1 is now available for Wifi 7 devices
4 5 6
Replies
106
Views
17K
jksmurf
J
RMerlin
ANNOUNCEMENT: Asuswrt-Merlin support underway for 3 Wifi 7 routers
5 6 7
Replies
130
Views
27K
scasapending
S
DMcD-EMS-USMC
  • Locked
3006.102 alpha 2 Build(s) Now Available
Replies
2
Views
1K
octopus
octopus
RMerlin
Release Asuswrt-Merlin 3006.102.2 is now available for Wifi 7 devices
2 3 4
Replies
63
Views
7K
ryosuke
R
octopus
  • Locked
[ 3006.102 alpha Build(s) ] Testing available build(s)
2 3
Replies
59
Views
11K
octopus
octopus
Similar threads
Thread starter Title Forum Replies Date
kaotic2499 Please add Asuswrt-merlin to GT-BE98 (Non-pro) version Asuswrt-Merlin 22
RMerlin Release Asuswrt-Merlin 3004.388.8_4 is now available Asuswrt-Merlin 83
RMerlin Release Asuswrt-Merlin 3006.102.2 is now available for Wifi 7 devices Asuswrt-Merlin 63
B Unable to establish VPN connection to my PiVPN (ovpn) from my Asus RT-AC86U running Asuswrt-Merlin 386.14 Asuswrt-Merlin 1
F Several Questions Re:Asuswrt-Merlin Feature Implementation Asuswrt-Merlin 2
Yota How to enable port randomization in Asuswrt-Merlin? Asuswrt-Merlin 4
RMerlin Beta Asuswrt-Merlin 3006.102.2 Beta is now available for Wifi 7 devices Asuswrt-Merlin 70
J Does Asuswrt-Merlin support AiMesh over Wifi? Asuswrt-Merlin 4
Siff Printing from Guest Network (ASUSWRT-Merlin 3004.388.8_2) Asuswrt-Merlin 5
Siff Setting dnsmasq on Asuswrt-Merlin Asuswrt-Merlin 8

Similar threads

Latest threads

Support SNBForums w/ Amazon

If you'd like to support SNBForums, just use this link and buy anything on Amazon. Thanks!

Sign Up For SNBForums Daily Digest

Get an update of what's new every day delivered to your mailbox. Sign up here!

Members online

Total: 693 (members: 34, guests: 659)
Top