Wireguard Wireguard amtm installation?

[johndoe85]

Why is there no installation of wireguard in amtm?

And the wireguard setup found here does not work. I am running a ASUS RT-AC66U B1 with 386.2_4 firmware.

pastebin output

 

[Wallace_n_Gromit]

Why is there no installation of wireguard in amtm?

[Experimental] WireGuard for HND platform (4.1.x kernels)

1. Install WireGuard You need Entware-aarch64-3.10 to use wireguard without a new firmware build. ㅡ Kernel Module ㅡ RT-AC86U, GT-AC2900 - 4.1.27 https://github.com/odkrys/entware-makefile-for-merlin/raw/main/wireguard-kernel_1.0.20210219-k27_1_aarch64-3.10.ipk opkg install...

www.snbforums.com

WireGuard worth the risk ?

Hi I see many jumping on the new kid of the block WireGuard protocol but came across a good read here: https://restoreprivacy.com/wireguard/ Despite the back and forth debate between many top VPN providers especially Mullvad, Azire, Nordvpn and AirVPN, AirVPN state that they will not use their...

www.snbforums.com

And the wireguard setup found here does not work. I am running a ASUS RT-AC66U B1 with 386.2_4 firmware.

[Experimental] WireGuard for HND platform (4.1.x kernels)

1. Install WireGuard You need Entware-aarch64-3.10 to use wireguard without a new firmware build. ㅡ Kernel Module ㅡ RT-AC86U, GT-AC2900 - 4.1.27 https://github.com/odkrys/entware-makefile-for-merlin/raw/main/wireguard-kernel_1.0.20210219-k27_1_aarch64-3.10.ipk opkg install...

www.snbforums.com

...that means your ASUS RT-AC66U B1 is to old to support wireguard even if wireguard were to be supported on Merlin firmware.

 

[Martineau]

Why is there no installation of wireguard in amtm?

No one has yet requested it to be added.

And the wireguard setup found here does not work. I am running a ASUS RT-AC66U B1 with 386.2_4 firmware.

Your router is not using kernel 4.xx... here are the current supported ASUS routers... (RT-AX56U/RT-AX58U routers run Kernel 4.xx but not sure if their install package still exist?)

 

[johndoe85]

Aha god damnit

 

[Ubimo]

No one has yet requested it to be added.

I hereby officially request it to be added.

 

[johndoe85]

I hereby officially request it to be added.

#metoo

 

[KingBravery]

I hereby officially request it to be added.

I want it too

 

[JGrana]

No one has yet requested it to be added.

Your router is not using kernel 4.xx... here are the current supported ASUS routers... (RT-AX56U/RT-AX58U routers run Kernel 4.xx but not sure if their install package still exist?)

View attachment 33603

Hmm, I didn’t think Wireguard was supported on AX58u routers. I believe @Odkrys tried compiling a loadable module for the AX58u but it caused boot loops.
I have compiled Wireguard-go for the AX58u but am having problems compiling the Wireguard-tools package…include headers issues.
(I’m trying to compile right on the AX58u using Entware tool chain)

Any help would be appreciated ;-)

 

[Kingp1n]

I hereby officially request it to be added.

Wireguard script/addon would be a nice addition!!!

 

[Martineau]

Hmm, I didn’t think Wireguard was supported on AX58u routers. I believe @Odkrys tried compiling a loadable module for the AX58u but it caused boot loops.

Ahh, that would certainly explain why the RT-AX56U/RT-AX58U support went AWOL.

 

[Wycleff]

Wireguard on AX-58U would be awesome. Damn !

 

[Zonkd]

This would be a nice feature addition for me.

 

[heysoundude]

I hereby officially request it to be added.

I would suggest that you should mention the appropriate devs with your requests to get their attention, friends. @RMerlin and @thelonelycoder I think are the official arbiters of amtm stuff

 

[elgreco29]

Me too

 

[SomeWhereOverTheRainBow]

Ahh, that would certainly explain why the RT-AX56U/RT-AX58U support went AWOL.

Hmm, I didn’t think Wireguard was supported on AX58u routers. I believe @Odkrys tried compiling a loadable module for the AX58u but it caused boot loops.
I have compiled Wireguard-go for the AX58u but am having problems compiling the Wireguard-tools package…include headers issues.
(I’m trying to compile right on the AX58u using Entware tool chain)

Any help would be appreciated ;-)

Give it a few more months, there are still alot of unknowns and question marks about these newer routers (and what they actually support). , I am sure someone will figure out the problem with a few more months of people running merlin and playing around with these newer supported router.

 

[SomeWhereOverTheRainBow]

Ahh, that would certainly explain why the RT-AX56U/RT-AX58U support went AWOL.

Hmm, I didn’t think Wireguard was supported on AX58u routers. I believe @Odkrys tried compiling a loadable module for the AX58u but it caused boot loops.
I have compiled Wireguard-go for the AX58u but am having problems compiling the Wireguard-tools package…include headers issues.
(I’m trying to compile right on the AX58u using Entware tool chain)

Any help would be appreciated ;-)

The news on the RT-AX56U/RT-AX58U. These model routers cpu BCM6755 appear to be some kind of armv7/armv8(aarch64) hybrid. It seems to lend most of support to ARMV7. This is probably why the compatibility issues.

 

[JGrana]

The news on the RT-AX56U/RT-AX58U. These model routers cpu BCM6755 appear to be some kind of armv7/armv8(aarch64) hybrid. It seems to lend most of support to ARMV7. This is probably why the compatibility issues.

I agree about the hybrid nature. Im not sure they support 64 bit apps - like the AX88U. At one point long ago, I had compiled chrony on an AX88U. Ran great. Copied over to an AX58U and it wouldn't run. I had to setup the development environment on the AX58U and compile there.

 

[Sharkbyte]

Has anyone figured out how to put wiregaurd into the rt-ax56u?

 

[ZebMcKayhan]

Has anyone figured out how to put wiregaurd into the rt-ax56u?

Just install wireguard manager in amtm. Have you tried it?
AX56U would require using 386.4 (or later) with buildt in wireguard modules, as there are no custom modules for this model.

Here is a guide to get you started
https://github.com/ZebMcKayhan/WireguardManager/blob/main/README.md#table-of-content

If you run into problems, post it here:

Wireguard - Session Manager - Discussion (2nd) thread

This thread http://www.snbforums.com/threads/session-manager.70787/ has now expired. Thanks for the heads-up SNB Forum member @Ubimo

www.snbforums.com

Good luck!

//Zeb

 

[Jumpstarter]

Has anyone figured out how to put wiregaurd into the rt-ax56u?

Just install wireguard manager in amtm. Have you tried it?
AX56U would require using 386.4 (or later) with buildt in wireguard modules, as there are no custom modules for this model.

Here is a guide to get you started
https://github.com/ZebMcKayhan/WireguardManager/blob/main/README.md#table-of-content

If you run into problems, post it here:

Wireguard - Session Manager - Discussion (2nd) thread

This thread http://www.snbforums.com/threads/session-manager.70787/ has now expired. Thanks for the heads-up SNB Forum member @Ubimo

www.snbforums.com

Good luck!

//Zeb

I just bought mine and I have been trying to figure this out as well. I went modprobing a couple of times and I am not finding it inside my list of modules.

:/tmp/home/root# modprobe -l | grep wg.ko

cannot seem to lsmod it either

/tmp/home/root# lsmod -l | grep wg