87u
everyone devices connected to LAN1 port i see <unknown> in tools menu.
Its normal ?
imo its a fw bug becouse in network map i see device and his mac adres
#!/bin/sh
logger -t "($(basename $0))" $$ Selective routing starting...
# This Script only works with Dual Wan and one VPN Client enabled (VPN Client 1 or 2)
# Table 100 -> Default via wan0 -> automatically created by enabling Dual WAN
# Table 200 -> Default via wan1 -> automatically created by enabling Dual WAN
# Table 10 -> Default via tun_if -> created by this script
# Source LAN IP Ranges
# Range routed to VPN Tunnel
IP_RANGE1="192.168.100.64-192.168.100.127"
# Range routed to WAN0 by default - This range does not need special handling
IP_RANGE2="192.168.100.2-192.168.100.63"
# Range routed to WAN1
IP_RANGE3="192.168.100.128-192.168.100.254"
# Delete table 10 and fwmark 1 and 2 if they exist
ip route flush table 10
ip route del default table 10
ip rule del fwmark 1 table 10
ip rule del fwmark 2 table 200
ip route flush cache
iptables -t mangle -F PREROUTING
logger -t "($(basename $0))" $$ Deleted table 10, fwmark 1 and 2 if they exist and flush cache
# It is necessary to disable Reverse Path Filtering on all current and future network interfaces:
for i in /proc/sys/net/ipv4/conf/*/rp_filter ; do
echo 0 > $i
done
logger -t "($(basename $0))" $$ Disabled Reverse Path Filtering for all interfaces
# Let's find out the tunnel interface 'tun_if' ( (tun_if="tun11") )
iface_lst=`route | awk ' {print $8}'`
for tun_if in $iface_lst; do
if [ $tun_if == "tun11" ] || [ $tun_if == "tun12" ]; then
break
fi
done
# Let's get the tunnel interface IP address 'tun_ip'
tun_ip=$(ifconfig $tun_if | grep 'inet addr:'| cut -d: -f2 | awk '{ print $1}')
logger -t "($(basename $0))" $$ Tunnel interface is $tun_if with IP $tun_ip
# Copy all non-default and non-VPN routes from table 200 into table 10
ip route show table 200 | grep -Ev ^default | grep -Ev $tun_if | grep -Ev ppp0\
| while read ROUTE ; do
ip route add table 10 $ROUTE
done
logger -t "($(basename $0))" $$ Copied all non-default and non-vpn routes from table 200
# Add default to VPN and fwmark 1 on table 10
ip route add default via $tun_ip dev $tun_if table 10
ip rule add fwmark 1 table 10
logger -t "($(basename $0))" $$ Default added to $tun_if on $tun_ip table 10 mark 1
# Add rule fwmark 2 to table 200
ip rule add fwmark 2 table 200
logger -t "($(basename $0))" $$ Added rule Fwmark 2 to table 200 via $(nvram get wan1_gateway)
# Mark Traffic for WAN1 (table 200)
iptables -t mangle -A PREROUTING -i br0 -m iprange --src-range $IP_RANGE3 -j MARK --set-mark 2
logger -t "($(basename $0))" $$ $IP_RANGE3 mark set 2
# Mark Traffic for VPN Tunnel
iptables -t mangle -A PREROUTING -i br0 -m iprange --src-range $IP_RANGE1 -j MARK --set-mark 1
logger -t "($(basename $0))" $$ $IP_RANGE1 mark set 1
# Drop traffic for Range 1 if VPN is down
iptables -I FORWARD -i br0 -s $IP_RANGE1 -o eth0 -j DROP
logger -t "($(basename $0))" $$ $IP_RANGE1 traffic dropped if VPN down
logger -t "($(basename $0))" $$ Completed " $0${*:+ $*}."
I can concur that igmpproxy appears not to be working in this release when using a PPOE connection, for some odd reason /tmp/igmpproxy.conf does not exist and hence IGMP multicast proxy will not start breaking IPTV. Even if i manually create igmpproxy.conf, taken from a copy from the previous merlin firmware, igmpproxy will not start complaining of undefined ViFs
Welcome To SNBForums
SNBForums is a community for anyone who wants to learn about or discuss the latest in wireless routers, network storage and the ins and outs of building and maintaining a small network.
If you'd like to post a question, simply register and have at it!
While you're at it, please check out SmallNetBuilder for product reviews and our famous Router Charts, Ranker and plenty more!
