Release Asuswrt-Merlin 388.1 is now available for all supported Wifi 6 models

[GHog]

Jerry Loh says: Hi, not sure if it is okay to report here. I am running 388.1 on both routers, connected with LAN cable but it shows as disconnected actually it is working. Small bug to report here nothing big deal.

I am using the same firmware on both routers and have a hardwired backhaul connection. Not seeing the disconnect issue. Granted my node router is not my master and I do not use the RT-AX86u in my setup. If I select the "network" tab on the page, I still do not show connection issues message.

 

[Davev6]

Hi, not sure if it is okay to report here. I am running 388.1 on both router, connected with LAN cable but it show as disconnected actually it is working. Small bug to report here nothing big deal.

Same issue here. Seems like only a UI issue. No errors on the mobile app

 

[gxcare]

Just to share my experience regarding WiFi issues on this release, in my case (single RT-AX86U, no mesh) everything works perfectly as long as I don't enable the 160 MHz for the 5 GHz band. In this case after some time (hours) my phone (Samsung S21) reports to be connected to the WiFi but Internet access is not available. If I force the WiFi reconnection on the phone everything works again. I have tested with all the combinations of DFS and fixed/auto channels but the result is the same. I haven't tested the 160 MHz with other firmware versions.

I have installed the latest official firmware, reset all the configurations, and I can confirm that this issue is present also on it. I will try to send a feedback with this bug report to ASUS.

 

[mikezilla2]

just whats on the way hardware wise if you are on the ax88 and happy with it ?

 

[bluzfanmr1]

Just for fun and as a possible seconday backup, I was playing around with Time Machine backups on the GT-AX6000. Is it working for anyone else? I'm getting the "There was a problem connecting to the server - The version of the server you are trying to connect to is not supported" error. I believe this was an issue previously that was fixed but not sure if it's the same issue this time.

https://www.snbforums.com/threads/time-machine-does-not-work-in-386-4.77134/

Has anybody tried Time Machine backups yet?

 

[magwa_sc]

I picked up a used GT-AXE11000 used for cheap I did a reset then flashed from stock 386.45940 to Asus version 388.21224 then another reset and then to Merlin 388.1 ROG skin version. Running great for the past 4 days.

I forgot to look when it was stock but the "Internet/WAN" and 2.5Gb ports are flip flopped on which one is active. I currently have it plugged into the 2.5Gb port but it shows the WAN port is connected:
Edit: Added 2nd Dual WAN picture

 

[Henkan]

Same on my RT-AX86U

 

[John Fitzgerald]

I picked up a used GT-AXE11000 used for cheap I did a reset then flashed from stock 386.45940 to Asus version 388.21224 then another reset and then to Merlin 388.1 ROG skin version. Running great for the past 4 days.

I forgot to look when it was stock but the "Internet/WAN" and 2.5Gb ports are flip flopped on which one is active. I currently have it plugged into the 2.5Gb port but it shows the WAN port is connected:
View attachment 46937

 

[emwgee]

ASUS just released GT-AX11000 Firmware version 3.0.0.4.388.22237

Will there be an updated Asuswrt-Merlin version too?

 

[Damit1]

16 days in a row! Wooowooh!

Longest time in a long time, the WiFi is stable- everything is working.
Thank you for the firmware!

 

[L&LD]

ASUS just released GT-AX11000 Firmware version 3.0.0.4.388.22237

Will there be an updated Asuswrt-Merlin version too?

No (at least, not expected). RMerlin needs the GPL source code drops to do his magic. And he doesn't do it, model, by model either.

 

[shabbs]

Well, updated my main router to the GT-AX6000 beast after a delicious price drop on that thing that I could simply not refuse.

Got 388.1 (non-ROG skin) all setup and configured this afternoon (flash, full reset, manual config). Final restart of the network done just now. Been a while since I've had to manually configure my router... ugh. That was not fun, good thing I had screen grabs of everything before. Dynamic DNS, VPN Director, DNS Director, DHCP etc... all back up and running as before.

Devices and gear all happy - Nest, IOT, TP-Link, Google etc.... Will let it all settle in now. Family was accommodating of the outages thankfully.

Speedtest checks out nicely too... apart from that piddly upload. Thanks Rogers.

Once again, thank you @RMerlin and team.

 

[kramttocs]

The UI on my RT-AX86U stops responding until I reboot. I've scheduled a weekly reboot but still happens between then. I believe this started after updating. The router is being polled by a Home Assistant integration so that might have an impact but I've been using it for a couple years with no issues.

 

[jata]

The UI on my RT-AX86U stops responding until I reboot. I've scheduled a weekly reboot but still happens between then. I believe this started after updating. The router is being polled by a Home Assistant integration so that might have an impact but I've been using it for a couple years with no issues.

I have AX86S and it runs out of memory and reboots every 5-7 days on 388.1. This could be what is happening to you. Issue/bug might be related to the networkmap process. Hope to get it fixed in 388.2

See this thread that might be helpful if it's same issue

Out of Memory Errors 388.1 / No space left on device [SOLUTIONS]

Update 3/23/2023 - FW 388.2 B1 So far it looks like 388.2 B1 has fixed the issue with networkmap. I have turned off my cron job and its going on 2 days now, the mem use from networkmap is stable. Highlights of tips from this tread: - Script to restart networkmap and sysstate every night. I...

www.snbforums.com

 

[dbell]

ASUS just released GT-AX11000 Firmware version 3.0.0.4.388.22237

Will there be an updated Asuswrt-Merlin version too?

388.2-alpha1 posted on test builds drive yesterday: https://onedrive.live.com/?authkey=!AGY2taGX02nVmWA&id=CCE5625ED3599CE0!1427&cid=CCE5625ED3599CE0

Oh that lists GT-AX11000 PRO but changelog says:

- NEW: Merged with GPL 388_20566 (RT-AX88U and GT-AX11000)

So perhaps the 22237 GPL is not yet available.

 

[shabbs]

388.2-alpha1 posted on test builds drive yesterday: https://onedrive.live.com/?authkey=!AGY2taGX02nVmWA&id=CCE5625ED3599CE0!1427&cid=CCE5625ED3599CE0

Oh snap.

 

[kramttocs]

I have AX86S and it runs out of memory and reboots every 5-7 days on 388.1. This could be what is happening to you. Issue/bug might be related to the networkmap process. Hope to get it fixed in 388.2

See this thread that might be helpful if it's same issue

Out of Memory Errors 388.1 / No space left on device [SOLUTIONS]

Update 3/23/2023 - FW 388.2 B1 So far it looks like 388.2 B1 has fixed the issue with networkmap. I have turned off my cron job and its going on 2 days now, the mem use from networkmap is stable. Highlights of tips from this tread: - Script to restart networkmap and sysstate every night. I...

www.snbforums.com

Interesting read. Thanks for that!

 

[rtm]

Thanks @RMerlin for making such great firmware and really brings asus routers to its full potential.

I wanted to share my use experience hope it can help with the debug.

I've installed 388.1 ROG on two ROG Rapture GT AX11000, 2 different location.

Setup 1. new ROG GT AX11000 around 1 years old or less running 388.1 ROG merlin

AImesh: none

clients: around 10 clients connected.

no issue at all everything is fast and web GUI is fast.


setup 2. Old ROG GT AX11000 few years old might have had it since release. running 388.1 ROG merlin

Amish: 2x XT12 pro on latest offical firmware 3.0.0.4.388.22127

Clients: close to 50 clients

all the connection are stable, fast no drop outs.

The only problem with setup 2 is the web GUI. It is very slow when logging in. but after logging in the speed seems to be ok when changing settings as long as I don't click on the network map or the aimesh page. never had this problem before prior to the 388.1 ROG firmware.

Could it be the 2 GT ax11000 are using different hardware since their build dates are few years apart that's why the newer GT AX11000 router doesn't have any problem at all.

Or maybe just because the older GT AX11000 is handling too much clients that's why it's having this slow webGUI issue on this firmware 388.1 ROG merlin.

 

[L&LD]

There are many more differences between setups 1 and 2. Those AiMesh-connected XT12s don't inspire confidence in me that it is (just) the GT-AX11000 that may be misbehaving.

Have you performed a full network reboot via the GUI; AiMesh, System Settings, System Reboot?

Have you performed a full power shutdown/electrical reset (pull the AC power plugs from both the routers and the wall plugs, and wait for as long as you can; minimum of 2 minutes (I would aim for 10 minutes or longer, including unplugging the ISP ONT/modem too for at least that long), leaving all the power switches 'on', before powering everything back up again)?

Have you turned off the XT12s and seen a difference in the Gui's responsiveness? If simply turning them off doesn't do anything, have you tried removing them from the AiMesh setup, to test?

Have you performed a full reset to factory defaults on the setup 2 GT-AX11000 lately?

After doing a full system reboot, wait for at least 10 to 15 minutes for the routers/network to fully settle down. Then, on the main router, create a backup config file. Disconnect everything from the main router, including USB devices and the WAN port connection to your ISP, and perform a full reset to factory defaults using the reset button, WPS button, or via the GUI. Better yet, do all three. In between, reflash the firmware that is already installed now.

Import the saved backup config file you created and re-associate the AiMesh nodes (XT12s). Test if the issue persists. If it does, I would redo the full reset to factory defaults, and then minimally and manually configure the router to secure it and connect to your ISP. Test. If satisfactory, add one node, test again. Continue building your network to where it was (manually, keeping good notes of your progress), until it is either fully working, or, it shows the same symptoms. If the latter, come back with those details and we may be able to help/diagnose further at that time.

 

[rtm]

There are many more differences between setups 1 and 2. Those AiMesh-connected XT12s don't inspire confidence in me that it is (just) the GT-AX11000 that may be misbehaving.

Have you performed a full network reboot via the GUI; AiMesh, System Settings, System Reboot?

Have you performed a full power shutdown/electrical reset (pull the AC power plugs from both the routers and the wall plugs, and wait for as long as you can; minimum of 2 minutes (I would aim for 10 minutes or longer, including unplugging the ISP ONT/modem too for at least that long), leaving all the power switches 'on', before powering everything back up again)?

Have you turned off the XT12s and seen a difference in the Gui's responsiveness? If simply turning them off doesn't do anything, have you tried removing them from the AiMesh setup, to test?

Have you performed a full reset to factory defaults on the setup 2 GT-AX11000 lately?

After doing a full system reboot, wait for at least 10 to 15 minutes for the routers/network to fully settle down. Then, on the main router, create a backup config file. Disconnect everything from the main router, including USB devices and the WAN port connection to your ISP, and perform a full reset to factory defaults using the reset button, WPS button, or via the GUI. Better yet, do all three. In between, reflash the firmware that is already installed now.

Import the saved backup config file you created and re-associate the AiMesh nodes (XT12s). Test if the issue persists. If it does, I would redo the full reset to factory defaults, and then minimally and manually configure the router to secure it and connect to your ISP. Test. If satisfactory, add one node, test again. Continue building your network to where it was (manually, keeping good notes of your progress), until it is either fully working, or, it shows the same symptoms. If the latter, come back with those details and we may be able to help/diagnose further at that time.

Thank you for your detailed instruction. I did try to reboot the setup 2 gt ax11000 with the power button and also via the admin page few times.

After reboot for first few mins things are fast but then after a while the admin page started to lag again. I haven't try to reboot the nodes as the 2x xt12 nodes just auto connects every time the router is rebooted.

So far everything is running stable and fast it's just the web GUI is extremely slow when I try to login and change settings.

my setup 1 GT AX11000 router is running flawlessly uptime is over 22days I think and the web GUI is fast as well.

I haven't reset to factory default on the setup 2 AX11000 for few years. as it's been running fine with Merlin. even on the 388.1 ROG firmware everything else works fine except the slow web GUI. Because I've many custom settings on the setup 2 ax11000 atm with 2 VPN connection and 1 VPN server running also connected to a unifi 10GBE switch and connected to a Synology NAS all running 10GBE connection and fixed IP. even the 10GBE connection is getting full speed as well.

The AXE 16000 I ordered should arrive in the next few days when I receive it I will do a clean install for everything and then install the 388.1 firmware and see how it goes.

also another interesting problem is on the setup 1 GT AX11000 logging in with the IOS Asus app it load fast and can see all devices connected to it. about 30 clients atm.

but on the setup 2 GT AX11000 when logging in with the IOS asus app. it is showing only 3 devices which are the router and the 2 nodes but unable to see details of all other 50 clients. some times it will show up after waiting for few mins sometimes it won't. But all wifi and lan devices are working at full speed and stable. the only problem is just the slow web GUI When I need to login and change settings.

I will report back once I have the AXE16000 setup with the 2 nodes and all the extra custom settings. I will do them manually 1 by 1 instead of restoring settings from the ax11000.