Menu
What's new
By:
Filters Better Search

ntpMerlin ntpMerlin - NTP Daemon for AsusWRT Merlin

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

@Jack Yaz
May be i found a bug in latest release, unable to edit Configuration from amtm :(

Edit : reboot solved the issue
Thanks for your contributions to the community, huge thumbs up :D
 
Last edited:
After switching from the dev branch back to the main, my ntpq out put is ....
Code: 
:/tmp/home/root# ntpq -4 -c rv | grep jitter
mintc=3, offset=0.000000, frequency=0.000, sys_jitter=0.000000,
clk_jitter=0.000, clk_wander=0.000

/tmp/home/root# ntpq -pn
No association ID's returned
 
so my ntpd appears to be broken.

upload_2020-5-9_23-27-34.png
 
Mine looked like yours, but now it is gone. Skynet tab and spdmerlin were gone too, but both are back after a reboot. ntpmerlin didn't come back.

jts
RT-AC86U w/ 384.17, RT-AC68U Aimesh node w/ same, Diversion, UiDivstats, Skynet, AiProtection, DoT, Scribe, UiScribe, Conmon, SpdMerlin, ScMerlin, Nsrum, NtpMerlin, OpenVPN selective clients
 
SomeWhereOverTheRainBow said:
well for now I am uninstalling ntpmerlin as ntpq appears to no longer properly work.
Click to expand...

I restarted it from amtm interface and it seems to be running for now. One thing I haven't tried yet is switching the config file from usb.
 
I still keep getting
Code: 
RT-AX88U-C7C0:/tmp/home/root# ntpq -4 -c rv | grep jitter
mintc=3, offset=0.000000, frequency=0.000, sys_jitter=0.000000,
clk_jitter=0.000, clk_wander=0.000
RT-AX88U-C7C0:/tmp/home/root# ntpq -pn
No association ID's returned
RT-AX88U-C7C0:/tmp/home/root#
it was great while it worked.
 
SomeWhereOverTheRainBow said:
I still keep getting
Code: 
RT-AX88U-C7C0:/tmp/home/root# ntpq -4 -c rv | grep jitter
mintc=3, offset=0.000000, frequency=0.000, sys_jitter=0.000000,
clk_jitter=0.000, clk_wander=0.000
RT-AX88U-C7C0:/tmp/home/root# ntpq -pn
No association ID's returned
RT-AX88U-C7C0:/tmp/home/root#
it was great while it worked.
Click to expand...

I think it is running, but the tab is still gone after another reboot. I ran the "genereate new graphs" from the amtm interface, but didn't see any results.
I will research the code you ran for your output tomorrow, but my eyes are heavy tonight.
My syslog shows:

May 9 23:03:08 RT-AC86U-8F38 ntpd[2796]: Listen normally on 7 tun11 10.8.8.3:123
May 9 23:03:08 RT-AC86U-8F38 ntpd[2796]: new interface(s) found: waking up resolver

I think it is running? There aren't any of the time errors like before. Yet. I will look further in the morning.
good night.
 
mine says ntpd running, but when asked for stats it does not produce any stats. I am assuming that is why there is no graphs generated as well. there was a plethora of code changed between dev version and going back to Master, so there is no telling why stats do not populate. I uninstalled wiping everything, reinstalled with still the same issues. I switched to router ntp server for now.
 
here was some of the most recent logs
Code: 
May  9 23:53:37 RT-AX88U-C7C0 S77ntpd: Waiting for NTP to sync before starting...
May  9 23:53:37 RT-AX88U-C7C0 ntpd[7626]: ntpd exiting on signal 15 (Terminated)
May  9 23:53:37 RT-AX88U-C7C0 ntpd[9032]: ntpd 4.2.8p13@1.3847-o Mon Mar 23 13:21:49 UTC 2020 (1): Starting
May  9 23:53:37 RT-AX88U-C7C0 ntpd[9032]: Command line: ntpd -c /jffs/addons/ntpmerlin.d/ntp.conf -g
May  9 23:53:37 RT-AX88U-C7C0 ntpd[9035]: proto: precision = 0.200 usec (-22)
May  9 23:53:37 RT-AX88U-C7C0 ntpd[9035]: getconfig: Couldn't open </jffs/addons/ntpmerlin.d/ntp.conf>: No such file or directory
May  9 23:53:37 RT-AX88U-C7C0 ntpd[9035]: Listen and drop on 0 v6wildcard [::]:123
May  9 23:53:37 RT-AX88U-C7C0 ntpd[9035]: Listen and drop on 1 v4wildcard 0.0.0.0:123
May  9 23:53:37 RT-AX88U-C7C0 ntpd[9035]: Listen normally on 2 lo 127.0.0.1:123
May  9 23:53:37 RT-AX88U-C7C0 ntpd[9035]: Listen normally on 3 lo:0 127.0.1.1:123
May  9 23:53:37 RT-AX88U-C7C0 ntpd[9035]: Listen normally on 4 eth0 73.104.35.91:123
May  9 23:53:37 RT-AX88U-C7C0 ntpd[9035]: Listen normally on 5 br0 192.168.1.1:123
May  9 23:53:37 RT-AX88U-C7C0 ntpd[9035]: Listen normally on 6 tun21 10.7.0.1:123
May  9 23:53:37 RT-AX88U-C7C0 ntpd[9035]: Listen normally on 7 tun22 10.16.0.1:123
May  9 23:53:37 RT-AX88U-C7C0 ntpd[9035]: Listen normally on 8 lo [::1]:123
May  9 23:53:37 RT-AX88U-C7C0 ntpd[9035]: Listen normally on 9 eth0 [2001:558:6043:2a:dca7:2870:710e:474]:123
May  9 23:53:37 RT-AX88U-C7C0 ntpd[9035]: Listen normally on 10 eth0 [fe80::aa5e:45ff:fead:c7c0%10]:123
May  9 23:53:37 RT-AX88U-C7C0 ntpd[9035]: Listen normally on 11 eth2 [fe80::aa5e:45ff:fead:c7c0%12]:123
May  9 23:53:37 RT-AX88U-C7C0 ntpd[9035]: Listen normally on 12 eth3 [fe80::aa5e:45ff:fead:c7c0%13]:123
May  9 23:53:37 RT-AX88U-C7C0 ntpd[9035]: Listen normally on 13 eth4 [fe80::aa5e:45ff:fead:c7c0%14]:123
May  9 23:53:37 RT-AX88U-C7C0 ntpd[9035]: Listen normally on 14 eth5 [fe80::aa5e:45ff:fead:c7c0%15]:123
May  9 23:53:37 RT-AX88U-C7C0 ntpd[9035]: Listen normally on 15 spu_us_dummy [fe80::200:ff:fe00:0%17]:123
May  9 23:53:37 RT-AX88U-C7C0 ntpd[9035]: Listen normally on 16 spu_ds_dummy [fe80::200:ff:fe00:0%18]:123
May  9 23:53:37 RT-AX88U-C7C0 ntpd[9035]: Listen normally on 17 eth6 [fe80::aa5e:45ff:fead:c7c0%20]:123
May  9 23:53:37 RT-AX88U-C7C0 ntpd[9035]: Listen normally on 18 eth7 [fe80::aa5e:45ff:fead:c7c4%21]:123
May  9 23:53:37 RT-AX88U-C7C0 ntpd[9035]: Listen normally on 19 br0 [2601:348:300:6::1]:123
May  9 23:53:37 RT-AX88U-C7C0 ntpd[9035]: Listen normally on 20 br0 [fe80::aa5e:45ff:fead:c7c0%22]:123
May  9 23:53:37 RT-AX88U-C7C0 ntpd[9035]: Listening on routing socket on fd #37 for interface updates
May  9 23:53:37 RT-AX88U-C7C0 ntpd[9035]: kernel reports TIME_ERROR: 0x2041: Clock Unsynchronized
May  9 23:53:37 RT-AX88U-C7C0 ntpd[9035]: kernel reports TIME_ERROR: 0x2041: Clock Unsynchronized
May  9 23:54:48 RT-AX88U-C7C0 S77ntpd: Waiting for NTP to sync before starting...
May  9 23:54:48 RT-AX88U-C7C0 ntpd[9035]: ntpd exiting on signal 15 (Terminated)
May  9 23:54:48 RT-AX88U-C7C0 ntpd[10215]: ntpd 4.2.8p13@1.3847-o Mon Mar 23 13:21:49 UTC 2020 (1): Starting
May  9 23:54:48 RT-AX88U-C7C0 ntpd[10215]: Command line: ntpd -c /jffs/addons/ntpmerlin.d/ntp.conf -g
May  9 23:54:48 RT-AX88U-C7C0 ntpd[10218]: proto: precision = 0.200 usec (-22)
May  9 23:54:48 RT-AX88U-C7C0 ntpd[10218]: getconfig: Couldn't open </jffs/addons/ntpmerlin.d/ntp.conf>: No such file or directory
May  9 23:54:48 RT-AX88U-C7C0 ntpd[10218]: Listen and drop on 0 v6wildcard [::]:123
May  9 23:54:48 RT-AX88U-C7C0 ntpd[10218]: Listen and drop on 1 v4wildcard 0.0.0.0:123
May  9 23:54:48 RT-AX88U-C7C0 ntpd[10218]: Listen normally on 2 lo 127.0.0.1:123
May  9 23:54:48 RT-AX88U-C7C0 ntpd[10218]: Listen normally on 3 lo:0 127.0.1.1:123
May  9 23:54:48 RT-AX88U-C7C0 ntpd[10218]: Listen normally on 4 eth0 73.104.35.91:123
May  9 23:54:48 RT-AX88U-C7C0 ntpd[10218]: Listen normally on 5 br0 192.168.1.1:123
May  9 23:54:48 RT-AX88U-C7C0 ntpd[10218]: Listen normally on 6 tun21 10.7.0.1:123
May  9 23:54:48 RT-AX88U-C7C0 ntpd[10218]: Listen normally on 7 tun22 10.16.0.1:123
May  9 23:54:48 RT-AX88U-C7C0 ntpd[10218]: Listen normally on 8 lo [::1]:123
May  9 23:54:48 RT-AX88U-C7C0 ntpd[10218]: Listen normally on 9 eth0 [2001:558:6043:2a:dca7:2870:710e:474]:123
May  9 23:54:48 RT-AX88U-C7C0 ntpd[10218]: Listen normally on 10 eth0 [fe80::aa5e:45ff:fead:c7c0%10]:123
May  9 23:54:48 RT-AX88U-C7C0 ntpd[10218]: Listen normally on 11 eth2 [fe80::aa5e:45ff:fead:c7c0%12]:123
May  9 23:54:48 RT-AX88U-C7C0 ntpd[10218]: Listen normally on 12 eth3 [fe80::aa5e:45ff:fead:c7c0%13]:123
May  9 23:54:48 RT-AX88U-C7C0 ntpd[10218]: Listen normally on 13 eth4 [fe80::aa5e:45ff:fead:c7c0%14]:123
May  9 23:54:48 RT-AX88U-C7C0 ntpd[10218]: Listen normally on 14 eth5 [fe80::aa5e:45ff:fead:c7c0%15]:123
May  9 23:54:48 RT-AX88U-C7C0 ntpd[10218]: Listen normally on 15 spu_us_dummy [fe80::200:ff:fe00:0%17]:123
May  9 23:54:48 RT-AX88U-C7C0 ntpd[10218]: Listen normally on 16 spu_ds_dummy [fe80::200:ff:fe00:0%18]:123
May  9 23:54:48 RT-AX88U-C7C0 ntpd[10218]: Listen normally on 17 eth6 [fe80::aa5e:45ff:fead:c7c0%20]:123
May  9 23:54:48 RT-AX88U-C7C0 ntpd[10218]: Listen normally on 18 eth7 [fe80::aa5e:45ff:fead:c7c4%21]:123
May  9 23:54:48 RT-AX88U-C7C0 ntpd[10218]: Listen normally on 19 br0 [2601:348:300:6::1]:123
May  9 23:54:48 RT-AX88U-C7C0 ntpd[10218]: Listen normally on 20 br0 [fe80::aa5e:45ff:fead:c7c0%22]:123
May  9 23:54:48 RT-AX88U-C7C0 ntpd[10218]: Listening on routing socket on fd #37 for interface updates
May  9 23:54:48 RT-AX88U-C7C0 ntpd[10218]: kernel reports TIME_ERROR: 0x2041: Clock Unsynchronized
May  9 23:54:48 RT-AX88U-C7C0 ntpd[10218]: kernel reports TIME_ERROR: 0x2041: Clock Unsynchronized
May  9 23:57:18 RT-AX88U-C7C0 ntpd[10218]: ntpd exiting on signal 15 (Terminated)
 
this is from after reinstalling just now.
Btw after installing i am locked out from doing anything.
Code: 
May 10 00:37:02 RT-AX88U-C7C0 ntpd[8690]: Listen normally on 0 lo 127.0.0.1:123
May 10 00:37:02 RT-AX88U-C7C0 ntpd[8690]: Listen normally on 1 lo:0 127.0.1.1:123
May 10 00:37:02 RT-AX88U-C7C0 ntpd[8690]: Listen normally on 2 br0 192.168.1.1:123
May 10 00:37:02 RT-AX88U-C7C0 ntpd[8690]: Listen normally on 3 lo [::1]:123
May 10 00:37:02 RT-AX88U-C7C0 ntpd[8690]: Listen normally on 4 br0 [2601:348:300:6::1]:123
May 10 00:37:02 RT-AX88U-C7C0 ntpd[8690]: Listen normally on 5 br0 [fe80::aa5e:45ff:fead:c7c0%22]:123
May 10 00:37:02 RT-AX88U-C7C0 ntpd[8690]: Listening on routing socket on fd #22 for interface updates
May 10 00:37:02 RT-AX88U-C7C0 ntpd[8690]: kernel reports TIME_ERROR: 0x2041: Clock Unsynchronized
May 10 00:37:02 RT-AX88U-C7C0 ntpd[8690]: kernel reports TIME_ERROR: 0x2041: Clock Unsynchronized
 
JT Strickland said:
I think it is running, but the tab is still gone after another reboot. I ran the "genereate new graphs" from the amtm interface, but didn't see any results.
I will research the code you ran for your output tomorrow, but my eyes are heavy tonight.
My syslog shows:

May 9 23:03:08 RT-AC86U-8F38 ntpd[2796]: Listen normally on 7 tun11 10.8.8.3:123
May 9 23:03:08 RT-AC86U-8F38 ntpd[2796]: new interface(s) found: waking up resolver

I think it is running? There aren't any of the time errors like before. Yet. I will look further in the morning.
good night.
Click to expand...
Are there any messages from ntpMerlin in syslog after a reboot?

What does your /jffs/scripts/services-start look like?
 
Jack Yaz said:
Are there any messages from ntpMerlin in syslog after a reboot?

What does your /jffs/scripts/services-start look like?
Click to expand...
this is services-start
Code: 
#!/bin/sh

/jffs/scripts/connmon startup & # connmon

/jffs/scripts/ntpmerlin startup & # ntpMerlin

/jffs/scripts/spdmerlin startup & # spdMerlin

/jffs/scripts/uiScribe startup # uiScribe

I had nothing specific in the logs that said ntpmerlin didnt run on time each time. I had to uninstall and reinstall three times to finally get it working. what got the stats and ntpq to finally detect ntpd was working was me running generate from the stat-page.
 
SomeWhereOverTheRainBow said:
this is services-start
Code: 
#!/bin/sh

/jffs/scripts/connmon startup & # connmon

/jffs/scripts/ntpmerlin startup & # ntpMerlin

/jffs/scripts/spdmerlin startup & # spdMerlin

/jffs/scripts/uiScribe startup # uiScribe

I had nothing specific in the logs that said ntpmerlin didnt run on time each time. I had to uninstall and reinstall three times to finally get it working. what got the stats and ntpq to finally detect ntpd was working was me running generate from the stat-page.
Click to expand...
Hm, the cron job makes the same call so I'm not sure why that was needed.
 
Jack Yaz said:
Yup, I've missed a call on install. It should be fine after the 10mins though. I'll get a fix out shortly
Click to expand...
yea at first i thought entware messed it up with their binaries :D because i followed your commit and couldn't find any flaws and i wasn't seeing any issues in the actual logs outputted by ntpmerlin.
 
You must log in or register to reply here.

Similar threads

morphine
ntpmerlin / chrony with GPS
Replies
12
Views
2K
heysoundude
heysoundude
thelonelycoder
amtm amtm 5.0 - the Asuswrt-Merlin Terminal Menu, November 17, 2024
2 3
Replies
59
Views
6K
thelonelycoder
thelonelycoder
Jack Yaz
YazFi YazFi v4.x - continued
6 7 8
Replies
147
Views
24K
fotingo
F
M
ntpMerlin Chrony clients fail to syncronize
Replies
3
Views
2K
JGrana
JGrana
JGrana
uKasa uKasa - A utility script that manages Kasa smart outlets and switches with Asuswrt-Merlin routers
2
Replies
29
Views
4K
L&LD
L&LD
Similar threads
Thread starter Title Forum Replies Date
W ntpMerlin ntpMerlin and timeserverd ntp_ready tests Asuswrt-Merlin AddOns 1
D NTPmerlin config log not found Asuswrt-Merlin AddOns 2
A ntpMerlin Problems with ntpMerlin Asuswrt-Merlin AddOns 9

Similar threads

Latest threads

Support SNBForums w/ Amazon

If you'd like to support SNBForums, just use this link and buy anything on Amazon. Thanks!

Sign Up For SNBForums Daily Digest

Get an update of what's new every day delivered to your mailbox. Sign up here!

Members online

Total: 567 (members: 24, guests: 543)
Top