spdMerlin spdMerlin - Automated speedtests with graphs

[heysoundude]

The graphs show the trend, the actuals are more useful than averages, IMO.

ESPECIALLY if we're doing battle with our ISP, agreed. (I like the CSV export option for this as well, bigtime!)

 

[Jack Yaz]

ow yeah

***@router:/tmp/home/root# /jffs/scripts/spdmerlin generate
spdMerlin: Starting speedtest using *** for WAN interface


   Speedtest by Ookla

     Server: ***
        ISP: ***
    Latency:     0.96 ms   (0.01 ms jitter)
   Download:   374.79 Mbps (data used: 169.4 MB)
     Upload:   437.89 Mbps (data used: 720.1 MB)
Packet Loss:     0.0%
 Result URL: ***
/opt/bin/sqlite3: error while loading shared libraries: libncursesw.so.6: wrong ELF class: ELFCLASS32
/opt/bin/sqlite3: error while loading shared libraries: libncursesw.so.6: wrong ELF class: ELFCLASS32
/opt/bin/sqlite3: error while loading shared libraries: libncursesw.so.6: wrong ELF class: ELFCLASS32
sed: /jffs/addons/spdmerlin.d/csv/Downloaddaily_WAN.tmp: No such file or directory
head: /jffs/addons/spdmerlin.d/csv/Downloaddaily_WAN.tmp: No such file or directory
awk: cmd. line:1: Division by zero
/opt/bin/sqlite3: error while loading shared libraries: libncursesw.so.6: wrong ELF class: ELFCLASS32
sed: /jffs/addons/spdmerlin.d/csv/Downloadweekly_WAN.tmp: No such file or directory
head: /jffs/addons/spdmerlin.d/csv/Downloadweekly_WAN.tmp: No such file or directory
awk: cmd. line:1: Division by zero
/opt/bin/sqlite3: error while loading shared libraries: libncursesw.so.6: wrong ELF class: ELFCLASS32
sed: /jffs/addons/spdmerlin.d/csv/Downloadmonthly_WAN.tmp: No such file or directory
head: /jffs/addons/spdmerlin.d/csv/Downloadmonthly_WAN.tmp: No such file or directory
awk: cmd. line:1: Division by zero
/opt/bin/sqlite3: error while loading shared libraries: libncursesw.so.6: wrong ELF class: ELFCLASS32
sed: /jffs/addons/spdmerlin.d/csv/Uploaddaily_WAN.tmp: No such file or directory
head: /jffs/addons/spdmerlin.d/csv/Uploaddaily_WAN.tmp: No such file or directory
awk: cmd. line:1: Division by zero
/opt/bin/sqlite3: error while loading shared libraries: libncursesw.so.6: wrong ELF class: ELFCLASS32
sed: /jffs/addons/spdmerlin.d/csv/Uploadweekly_WAN.tmp: No such file or directory
head: /jffs/addons/spdmerlin.d/csv/Uploadweekly_WAN.tmp: No such file or directory
awk: cmd. line:1: Division by zero
/opt/bin/sqlite3: error while loading shared libraries: libncursesw.so.6: wrong ELF class: ELFCLASS32
sed: /jffs/addons/spdmerlin.d/csv/Uploadmonthly_WAN.tmp: No such file or directory
head: /jffs/addons/spdmerlin.d/csv/Uploadmonthly_WAN.tmp: No such file or directory
awk: cmd. line:1: Division by zero
/opt/bin/sqlite3: error while loading shared libraries: libncursesw.so.6: wrong ELF class: ELFCLASS32

Entware updates playing havoc today.

opkg install --force-reinstall libncursesw

 

[Jack Yaz]

New button incoming

 

[QuikSilver]

@Jack Yaz

 

[dave14305]

View attachment 22548

New button incoming

That button needs social distancing from the rest.

 

[Jack Yaz]

That would be great @Jack Yaz , keeps everybody happy?

Done, PR ready to go. Just waiting for the AutoBW guys to make sure I haven't broken anything they rely on

 

[Stephen Harrington]

Done, PR ready to go. Just waiting for the AutoBW guys to make sure I haven't broken anything they rely on

Thanks, appreciate it. Also looking forward to the CSV exports!

 

[TonyK132]

Updated: I recently installed spdMerlin for the 1st time, but I am not getting any graphs displayed even after a week. I read in another post that manually running speedtest from amtm fixed it, so I tried it, but at the end of its run, it displayed this:


spdMerlin: Starting speedtest using auto-selected server for VPNC3 interface

[2020-04-12 08:04:47.323] [error] Configuration - Couldn't connect to server (Network is unreachable)
[2020-04-12 08:04:47.323] [error] Configuration - Cannot retrieve configuration document (0)
[2020-04-12 08:04:47.324] [error] ConfigurationError - Could not retrieve or read configuration (Configuration)
[2020-04-12 08:04:47.325] [error] ConfigurationError - Could not retrieve or read configuration (Configuration)
[error] Configuration - Could not retrieve or read configuration (ConfigurationError)
Error: near line 2: near ",": syntax error
awk: cmd. line:1: Division by zero
awk: cmd. line:1: Division by zero
awk: cmd. line:1: Division by zero
awk: cmd. line:1: Division by zero
awk: cmd. line:1: Division by zero
awk: cmd. line:1: Division by zero

I just realized that my VPN client 3 is not connecting which seems to be causing these errors. The other 2 VPN clients worked with no problem.

I did the installation from amtm. How can I get the graphs to display in the GUI?

 

[Jack Yaz]

I recently installed spdMerlin for the 1st time, but I am not getting any graphs displayed even after a week. I read in another post that manually running speedtest from amtm fixed it, so I tried it, but at the end of its run, it displayed this:

[2020-04-12 08:04:47.323] [error] Configuration - Couldn't connect to server (Network is unreachable)
[2020-04-12 08:04:47.323] [error] Configuration - Cannot retrieve configuration document (0)
[2020-04-12 08:04:47.324] [error] ConfigurationError - Could not retrieve or read configuration (Configuration)
[2020-04-12 08:04:47.325] [error] ConfigurationError - Could not retrieve or read configuration (Configuration)
[error] Configuration - Could not retrieve or read configuration (ConfigurationError)
Error: near line 2: near ",": syntax error
awk: cmd. line:1: Division by zero
awk: cmd. line:1: Division by zero
awk: cmd. line:1: Division by zero
awk: cmd. line:1: Division by zero
awk: cmd. line:1: Division by zero
awk: cmd. line:1: Division by zero

I did the installation from amtm. How do I fix these errors, and how can I get the graphs to display in the GUI?

Using a VPN? Is router in Router mode?

 

[TonyK132]

Using a VPN? Is router in Router mode?

Yes, and yes.

 

[Jack Yaz]

Yes, and yes.

Which VPN provider? Another user had issues until they allowed non-standard SSL traffic in their VPN providers portal, or something to that effect?

 

[TonyK132]

I figured out that I was getting these messages with the one VPN client that was not connecting properly. I faked out 16_0 by deleting that VPN link, then Merlin no longer tried to connect on that client and spdMerlin no longer complained. The other 2 clients were fine. I'm also now getting graphs for the WAN and the 2 working VPN clients, so all is good.

 

[immi803]

@Jack Yaz

Thanks for your awesome work always

Link generated by spdMerlin in ssh doesn't work if opened in browser, says Not found, is it supposed to be ok? Or it should work?
Is link a placebo?

 

[Jack Yaz]

@Jack Yaz

Thanks for your awesome work always

Link generated by spdMerlin in ssh doesn't work if opened in browser, says Not found, is it supposed to be ok? Or it should work?
Is link a placebo?

It should work. It's generated by the Ookla binary, so if it's broken please report it to them.

 

[Jack Yaz]

v3.4.0 is now available!
Changelog:

NEW: Change in minimum version requirement, see README!
NEW: Support for John's Fork of AsusWRT-Merlin
NEW: Option to toggle data output mode for weekly/monthly charts
NEW: Button to export/download CSVs used for charts
NEW: Add option to toggle time format in CSV exports between Unix and non-Unix time
CHANGE: Raw data output is now the default
CHANGE: Migrated from datasource plugin for ChartJS to D3js library
REMOVED: Legacy WebUI code that would override unused ASP pages

 

[maghuro]

v3.4.0 is now available!
Changelog:

NEW: Change in minimum version requirement, see README!
NEW: Support for John's Fork of AsusWRT-Merlin
NEW: Option to toggle data output mode for weekly/monthly charts
NEW: Button to export/download CSVs used for charts
NEW: Add option to toggle time format in CSV exports between Unix and non-Unix time
CHANGE: Raw data output is now the default
CHANGE: Migrated from datasource plugin for ChartJS to D3js library
REMOVED: Legacy WebUI code that would override unused ASP pages

Thanks Jack!

One minor bug: currently option 9 doesn't show if is using Unix or non-unix.

 

[Jack Yaz]

Thanks Jack!

One minor bug: currently option 9 doesn't show if is using Unix or non-unix.

What does

cat /jffs/addons/spdmerlin.d/config

return please?

 

[maghuro]

What does

cat /jffs/addons/spdmerlin.d/config

return please?

Edit: I pressed 9 a few times to force a change, and the same result.

 

[Jack Yaz]

Edit: I pressed 9 a few times to force a change, and the same result.

Were you on the develop branch by chance?

EDIT: hotfix pushed

 

[maghuro]

Were you on the develop branch by chance?

EDIT: hotfix pushed

No, afaik